Richard J. Wakeman

Personal Home Page

http://www.lboro.ac.uk/departments/cg/staff/wakeman.html

Articles in Scholarly Journals [Incomplete List]

  1. Separation technologies for sludge dewatering
    Journal of Hazardous Materials, vol. 144, no. 3, pp. 614–619, 2007
  2. NUMERICAL ANALYSIS OF MEDIUM COMPRESSION AND LOSSES IN FILTRATION AREA IN PLEATED MEMBRANE CARTRIDGE FILTERS
    Chemical Engineering Communications, vol. 194, no. 8, pp. 1053–1064, 2007
  3. Effect of surface modification of an engineered activated carbon on the sorption of 2,4-dichlorophenoxy acetic acid and benazolin from water
    Journal of Colloid and Interface Science, vol. 297, no. 2, pp. 434–442, 2006
  4. Sorption of atrazine on conventional and surface modified activated carbons
    Journal of Colloid and Interface Science, vol. 302, no. 2, pp. 408–416, 2006
  5. Multi-scale finite element modelling of laminar steady flow through highly permeable porous media
    Chemical Engineering Science, vol. 61, no. 2, pp. 586–596, 2006
  6. Multi-scale finite element modelling using bubble function method for a convection–diffusion problem
    Chemical Engineering Science, vol. 61, no. 8, pp. 2742–2751, 2006
  7. Pressure electroosmotic dewatering with continuous removal of electrolysis products
    Chemical Engineering Science, vol. 61, no. 14, pp. 4732–4740, 2006
  8. High-productive, nanostructured polyaniline membranes for gas separation
    Desalination, vol. 199, no. 1-3, pp. 474–476, 2006
  9. Enhanced permeability of polyaniline based nano-membranes for gas separation
    Journal of Membrane Science, vol. 282, no. 1-2, pp. 60–70, 2006
  10. Numerical Analysis of Coupled Stokes/Darcy Flows in Industrial Filtrations
    Transport in Porous Media, vol. 64, no. 1, pp. 73–101, 2006
  11. Finite Element Modelling of Flow Through a Porous Medium Between Two Parallel Plates Using The Brinkman Equation
    Transport in Porous Media, vol. 63, no. 1, pp. 71–90, 2006
  12. Surface modification and characterisation of a coal-based activated carbon
    Carbon, vol. 43, no. 15, pp. 3132–3143, 2005
  13. Finite-element modelling of combined free/porous flow regimes: simulation of flow through pleated cartridge filters
    Chemical Engineering Science, vol. 60, no. 4, pp. 995–1006, 2005
  14. Investigation of the efficiency of existing air pollution monitoring sites in the state of Kuwait
    Environmental Pollution, vol. 138, no. 2, pp. 219–229, 2005
  15. Towards ultrathin polyaniline films for gas separation
    Journal of Membrane Science, vol. 253, no. 1-2, pp. 199–208, 2005
  16. Analysis of Pleat Crowding and Medium Compression in Pleated Cartridge Filters
    Chemical Engineering Research and Design, vol. 83, no. A10, pp. 1246–1255, 2005
  17. Dynamic analysis of shaker mixers and an asymmetrical twin-container design
    Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 218, no. 3, pp. 153–154, 2004
  18. Influence of ionic strength and pH of dispersed systems on microfiltration1
    Desalination, vol. 163, no. 1-3, pp. 323–332, 2004
  19. Shear stress-based modelling of steady state permeate flux in microfiltration enhanced by two-phase flows
    Chemical Engineering Journal, vol. 97, no. 2-3, pp. 257–263, 2004
  20. Transport processes during electrowashing of filter cakes
    Chemical Engineering Science, vol. 59, no. 5, pp. 1103–1114, 2004
  21. Permeation through a bed on a vibrating medium: theory and experimental results
    Chemical Engineering Science, vol. 58, no. 9, pp. 1703–1713, 2003
  22. Consumption and Environmental Hazards of Pharmaceutical Substances in the UK
    Process Safety and Environmental Protection, vol. 81, no. B4, pp. 229–235, 2003
  23. Vibration-Assisted Dead-End Filtration: Experiments and Theoretical Concepts
    Chemical Engineering Research and Design, vol. 81, no. A8, pp. 916–923, 2003
  24. An Investigation of High Gradient Dielectrophoretic Filtration
    Chemical Engineering Research and Design, vol. 81, no. A8, pp. 924–935, 2003
  25. Electrically Enhanced Washing of Ionic Species from Fine Particle Filter Cakes
    Chemical Engineering Research and Design, vol. 81, no. A2, pp. 201–210, 2003
  26. Interactions between dissolved material and the fouling layer during microfiltration of a model beer solution
    Journal of Membrane Science, vol. 206, no. 1-2, pp. 253–264, 2002
  27. A finite volume model for the hydrodynamics of combined free and porous flow in sub-surface regions
    Advances in Environmental Research, vol. 7, no. 1, pp. 35–58, 2002
  28. Additional techniques to improve microfiltration
    Separation and Purification Technology, vol. 26, no. 1, pp. 3–18, 2002
  29. Stability of latex crossflow filtration: cake properties and critical conditions of deposition
    Chemical Engineering Journal, vol. 85, no. 1, pp. 27–34, 2002
  30. Preparation and characterisation of polyaniline based membranes for gas separation
    Journal of Membrane Science, vol. 184, no. 1, pp. 69–78, 2001
  31. Dead-End Filtration with Torsional Shear: Experimental Findings and Theoretical Analysis
    Chemical Engineering Research and Design, vol. 79, no. A3, pp. 249–259, 2001
  32. Clarifying Filtration of Fine Particle Suspensions Aided by Electrical and Acoustic Fields
    Chemical Engineering Research and Design, vol. 78, no. A1, pp. 125–135, 2000
  33. Sonothickening: Continuous In-line Concentration/Clarification of Fine Particle Suspensions by Power Ultrasound
    Chemical Engineering Research and Design, vol. 78, no. A4, pp. 651–661, 2000
  34. Numerical Modelling of Cake Formation and Fluid Loss from Non-Newtonian Muds During Drilling Using Eccentric/Concentric Drill Strings With/Without Rotation
    Chemical Engineering Research and Design, vol. 78, no. A5, pp. 707–714, 2000
  35. Membrane fouling and alternative techniques for its alleviation
    Membrane Technology, vol. 2000, no. 124, pp. 4–10, 2000
  36. The use of acoustic fields as a filtration and dewatering aid
    Ultrasonics, vol. 38, no. 1-8, pp. 657–661, 2000
  37. The intermediate stage of the dead-end filtration process
    Chemical Engineering Science, vol. 55, no. 18, pp. 3715–3728, 2000
  38. Software applications in filter control, data acquisition and data analysis
    Filtration & Separation, vol. 36, no. 8, pp. 57–64, 1999
  39. Company profile guide
    Filtration & Separation, vol. 35, no. 2, p. 203, 1998
  40. Crossflow microfiltration of shear-thinning aqueous titanium dioxide dispersions
    Chemical Engineering Journal, vol. 69, no. 1, pp. 53–61, 1998
  41. Ion exchange modules formed from polyhipe foam precursors
    Chemical Engineering Journal, vol. 70, no. 2, pp. 133–141, 1998
  42. Electrically Enhanced Microfiltration of Albumin Suspensions
    Food and Bioproducts Processing, vol. 76, no. C1, pp. 53–59, 1998
  43. Filter Cake Formation from Structured Suspensions
    Chemical Engineering Research and Design, vol. 75, no. A3, pp. 309–320, 1997
  44. FINITE-ELEMENT MODELING OF ELASTIC STRESS DISTRIBUTIONS IN COMPOSITE MATERIALS
    Mechanics of Advanced Materials and Structures, vol. 4, no. 3, pp. 233–249, 1997
  45. Electric field enhanced crossflow microfiltration of hydrophobically modified water soluble polymers?
    Journal of Membrane Science, vol. 131, no. 1-2, pp. 229–236, 1997
  46. The influence of pH and temperature on the rheology and stability of aqueous titanium dioxide dispersions
    Chemical Engineering Journal, vol. 67, no. 2, pp. 97–102, 1997
  47. Membrane-solute and liquid-particle interaction effects in filtration
    Filtration & Separation, vol. 34, no. 5, pp. 511–519, 1997
  48. Initial deposition of interacting particles by filtration of dilute suspensions
    AIChE Journal, vol. 43, no. 4, pp. 946–958, 1997
  49. The initial stages of compact formation from suspensions by filtration
    Chemical Engineering Science, vol. 51, no. 16, pp. 3897–3908, 1996
  50. Deformation and fracture in a model brittle particulate composite system: quartz-perspex
    Materials Science and Engineering A, vol. 211, no. 1-2, pp. 138–142, 1996
  51. Filtration characterisation and specific surface area measurement of activated sludge by Rhodamine B adsorption
    Water Research, vol. 30, no. 1, pp. 115–121, 1996
  52. Temperature Induced Particle Aggregation in Mashing and its Effect on Filtration Performance
    Food and Bioproducts Processing, vol. 74, no. C4, pp. 207–211, 1996
  53. Concentration and fractionation of polyvinyl alcohol-anionic surfactant stabilised latex dispersions by microfiltration
    Journal of Membrane Science, vol. 106, no. 1-2, pp. 57–65, 1995
  54. Radial flow dependence in filtration experiments
    Chemical Engineering Science, vol. 50, no. 23, pp. 3777–3782, 1995
  55. Selection of equipment for solid/liquid separation processes
    Filtration & Separation, vol. 32, no. 4, pp. 337–341, 1995
  56. Simulating the performance of tilting pan filters
    Filtration & Separation, vol. 32, no. 10, pp. 979–984, 1995
  57. Permeate flux decay during crossflow microfiltration of a cationic surfactant dispersion
    Filtration & Separation, vol. 31, no. 7, pp. 727–731, 1994
  58. Modelling slurry dewatering and cake growth in filtering centrifuges
    Filtration & Separation, vol. 31, no. 1, pp. 75–81, 1994
  59. The Howden-Wakeman filter in wastewater treatment
    Filtration & Separation, vol. 31, no. 2, pp. 183–187, 1994
  60. Simulation, modelling and sizing of pressure filters
    Filtration & Separation, vol. 31, no. 4, pp. 393–397, 1994
  61. A framework methodology for the simulation and sizing of diaphragm filter presses
    Minerals Engineering, vol. 7, no. 11, pp. 1411–1425, 1994
  62. Flux decay and rejection during micro- and ultra-filtration of hydrophobically modified water-soluble polymers
    Journal of Membrane Science, vol. 91, no. 1-2, pp. 145–152, 1994
  63. Mechanisms of permeate flux decay, solute rejection and concentration polarisation in crossflow filtration of a double chain ionic surfactant dispersion
    Journal of Membrane Science, vol. 88, no. 2-3, pp. 177–195, 1994
  64. Knoop hardness and fracture anisotropy of calcite
    Journal of Materials Science Letters, vol. 12, no. 6, pp. 407–410, 1993
  65. Electro-acoustic crossflow microfiltration
    Filtration & Separation, vol. 29, no. 5, pp. 425–432, 1992
  66. Factors affecting the formation and properties of wet compacts
    Powder Technology, vol. 65, no. 1-3, p. 283, 1991
  67. Influence of surfactants on the mechanical properties and comminution of wet-milled calcite
    Powder Technology, vol. 65, no. 1-3, pp. 403–410, 1991
  68. Colloidal fouling of microfiltration membranes during the treatment of aqueous feed streams
    Desalination, vol. 83, no. 1-3, pp. 35–52, 1991
  69. Microfiltration enhancement by electrical and ultrasonic force fields
    Filtration & Separation, vol. 27, no. 3, pp. 192–194, 1990
  70. Modelling, simulation and process design of the filter cycle
    Filtration & Separation, vol. 27, no. 6, pp. 412–419, 1990
  71. PREVENTION OF FLUX DECLINE IN ELECTRICAL MICROFILTRATION
    Drying Technology, vol. 6, no. 3, pp. 547–570, 1988
  72. Membrane fouling prevention in crossflow microfiltration by the use of electric fields
    Chemical Engineering Science, vol. 42, no. 4, pp. 829–842, 1987
  73. Residual saturation and dewatering of fine coals and filter cakes
    Powder Technology, vol. 40, no. 1-3, pp. 53–63, 1984
  74. Electrical field distributions and clear boundary layers in cross-flow electrofilters. Comments
    Industrial & Engineering Chemistry Fundamentals, vol. 20, no. 1, pp. 108–109, 1981
  75. Low-pressure dewatering kinetics of incompressible filter cakes, I. Variable total pressure loss or low-capacity systems
    International Journal of Mineral Processing, vol. 5, no. 4, pp. 379–393, 1979
  76. Low-pressure dewatering kinetics of incompressible filter cakes, II. Constant total pressure loss or high capacity systems
    International Journal of Mineral Processing, vol. 5, no. 4, pp. 395–405, 1979
  77. Diffusional extraction from hydrodynamically stagnant regions in porous media
    The Chemical Engineering Journal, vol. 11, no. 1, pp. 39–56, 1976
  78. Vacuum dewatering and residual saturation of incompressible filter cakes
    International Journal of Mineral Processing, vol. 3, no. 3, pp. 193–206, 1976
  79. Fluidisation and segregation of binary particle mixtures
    Powder Technology, vol. 13, no. 2, pp. 261–268, 1976
  80. A structural model for filter cake washing
    Chemical Engineering Science, vol. 29, no. 9, pp. 1857–1865, 1974