Dik J. Schipper
Personal Home Page
http://www.em.tue.nl/addresses/index.php/Schipper/178
Articles in Scholarly Journals [Incomplete List]
- Deterministic repeated contact of rough surfaces
Wear, vol. 264, no. 3-4, pp. 349–358, 2008 - Low Friction in CuO-Doped Yttria-Stabilized Tetragonal Zirconia Ceramics: A Complementary Macro- and Nanotribology Study
Journal of the American Ceramic Society, vol. 91, no. 5, pp. 1646–1652, 2008 - Plastic Deterministic Contact of Rough Surfaces
Journal of Tribology, vol. 129, no. 4, p. 957, 2007 - Stribeck Curve for Starved Line Contacts
Journal of Tribology, vol. 129, no. 1, p. 181, 2007 - Closure to “Discussion of ‘Experimental Investigation of Fully Plastic Contact of a Sphere Against a Hard Flat’ ” (2007, ASME J. Tribol., 129, p. 700)
Journal of Tribology, vol. 129, no. 3, p. 701, 2007 - Deformation due to contact between a rough surface and a smooth ball
Wear, vol. 262, no. 1-2, pp. 138–145, 2007 - Effect of Microstructure on the Tribological and Mechanical Properties of CuO-Doped 3Y-TZP Ceramics
Journal of the American Ceramic Society, vol. 90, no. 9, pp. 2747–2752, 2007 - Changes in the micro-geometry of a rolling contact
Tribology International, vol. 40, no. 4, pp. 672–679, 2007 - Modelling of static friction in rubber–metal contact
Tribology International, vol. 40, no. 4, pp. 588–594, 2007 - Criterion for surface contact deformation of metals
Tribotest, vol. 13, no. 1, pp. 1–11, 2007 - Plastic deformation and contact area of an elastic–plastic contact of ellipsoid bodies after unloading
Tribology International, vol. 40, no. 8, pp. 1311–1318, 2007 - Single asperity abrasion of coated nodular cast iron
Tribology International, vol. 40, no. 2, pp. 170–179, 2007 - Experimental Investigation of Fully Plastic Contact of a Sphere Against a Hard Flat
Journal of Tribology, vol. 128, no. 2, p. 230, 2006 - An elastic–plastic contact model of ellipsoid bodies
Tribology Letters, vol. 21, no. 3, pp. 262–271, 2006 - Analytical and experimental investigation of the static friction regime for rubber-rigid ball contact
Surface and Interface Analysis, vol. 38, no. 4, pp. 891–893, 2006 - Application of a Deterministic Contact Model to Analyze the Contact of a Rough Surface Against a Flat Layered Surface
Journal of Tribology, vol. 127, no. 2, p. 451, 2005 - Environmental effects on friction and wear of dry sliding zirconia and alumina ceramics doped with copper oxide
International Journal of Refractory Metals and Hard Materials, vol. 23, no. 4-6, pp. 386–390, 2005 - Measurement of wear on asperity level using image-processing techniques
Wear, vol. 258, no. 1-4, pp. 83–91, 2005 - Micro-contact based modelling of abrasive wear
Wear, vol. 258, no. 1-4, pp. 339–348, 2005 - The transition of mild to severe wear of ceramics
Wear, vol. 256, no. 6, pp. 585–591, 2004 - Deterministic Friction Model of a Rough Surface Sliding Against a Flat Layered Surface
Tribology Letters, vol. 17, no. 4, pp. 967–976, 2004 - On the Frictional Heating in Single Summit Contacts: Towards Failure at Asperity Level in Lubricated Systems
Journal of Tribology, vol. 126, no. 2, p. 275, 2004 - Friction behaviour of solid oxide lubricants as second phase in a-Al2O3 and stabilised ZrO2 composites
Wear, vol. 256, no. 1-2, pp. 182–189, 2004 - Wear of soft tool materials in sliding contact with zinc-coated steel sheet
Journal of Materials Processing Technology, vol. 141, no. 2, pp. 197–201, 2003 - Galling initiation due to frictional heating
Wear, vol. 254, no. 11, pp. 1127–1133, 2003 - Friction reduction by adding copper oxide into alumina and zirconia ceramics
Wear, vol. 255, no. 1-6, pp. 699–707, 2003 - Wear of ceramics due to thermal stress: a thermal severity parameter
Wear, vol. 249, no. 10-11, pp. 962–970, 2001 - The effect of lubricant selection on galling in a model wear test
Wear, vol. 251, no. 1-12, pp. 973–979, 2001 - Analysis of Material Transfer From a Soft Workpiece to a Hard Tool: Part I—Lump Growth Model
Journal of Tribology, vol. 123, no. 3, p. 469, 2001 - Analysis of Material Transfer From a Soft Workpiece to a Hard Tool: Part II—Experimental Verification of the Proposed Lump Growth Model
Journal of Tribology, vol. 123, no. 3, p. 474, 2001 - Calculation of Stribeck curves for line contacts
Tribology International, vol. 33, no. 3-4, pp. 175–181, 2000 - Deformation of Rough Line Contacts
Journal of Tribology, vol. 121, no. 3, p. 449, 1999 - Tribological properties of nanoscale alumina?zirconia composites
Wear, vol. 225-229, pp. 1293–1302, 1999 - Thermally induced wear of ceramics
Wear, vol. 225-229, pp. 857–861, 1999 - A wear measurement method based on the comparison of local surface heights
Wear, vol. 217, no. 2, pp. 182–189, 1998 - The effect of the viscosity-pressure behaviour of lubricants on the film thickness in elastohydrodynamically lubricated line contacts
Tribology Series, vol. 34, pp. 455–464, 1998 - Effects of a second phase on the tribological properties of Al2O3 and ZrO2 ceramics
Wear, vol. 210, no. 1-2, pp. 178–187, 1997 - On the Transitions in the Lubrication of Concentrated Contacts
Journal of Tribology, vol. 117, no. 2, p. 250, 1995 - Lubrication modes and the IRG transition diagram
Lubrication Science, vol. 8, no. 1, pp. 27–35, 1995 - The influence of laser line hardening of carbon steel AISI 1045 on the lubricated wear against steel AISI 52100
Wear, vol. 181-183, pp. 638–647, 1995 - Friction and wear behaviour of ceramic-hardened steel couples under reciprocating sliding motion
Wear, vol. 184, no. 1, pp. 33–43, 1995 - Tribological behaviour of unfilled and composite polyoxymethylene
Wear, vol. 148, no. 2, pp. 363–376, 1991 - Prediction of lubrication regimes of concentrated contacts
Lubrication Science, vol. 3, no. 3, pp. 191–200, 1991 - Prediction of lubrication regimes of concentrated contacts
Lubrication Science, vol. 3, no. 2, pp. 131–139, 1991 - Micro-EHL in Lubricated Concentrated Contacts
Journal of Tribology, vol. 112, no. 2, p. 392, 1990