Personal Home Page

http://www.eng.monash.edu.au/materials/staff/muddleb.html

Articles in Scholarly Journals [Incomplete List]

1. Mechanical properties of bulk and nanoscale TiO2 phases
   Journal of Physics and Chemistry of Solids, 2008
2. Low-temperature compaction of Ti–6Al–4V powder using equal channel angular extrusion with back pressure
   Materials Science and Engineering: A, vol. 490, no. 1-2, pp. 171–180, 2008
3. Strengthening of an Al–Cu–Sn alloy by deformation-resistant precipitate plates
   Acta Materialia, 2008
4. Early detection of nanoparticle growth from x-ray reciprocal space mapping
   Applied Physics Letters, vol. 92, no. 3, p. 034101, 2008
5. Orientation relationships and lattice matching for the S phase in Al–Cu–Mg alloys
   Acta Materialia, vol. 55, no. 9, pp. 3213–3228, 2007
6. Ultrastiff Cubic TiO_{2} Identified via First-Principles Calculations
   Physical Review Letters, vol. 98, no. 3, 2007
7. 3-D X-ray Diffraction Imaging with Nanoscale Resolution Using Incoherent Radiation
   Nano Letters, vol. 7, no. 5, pp. 1246–1250, 2007
8. Crystallography of the bcc/hcp transformation in a Mg–8Li alloy
   Materials Science and Engineering: A, vol. 460-461, pp. 227–232, 2007
9. X-ray diffraction profiling of metal-metal interfaces at the nanoscale
   Physical Review B, vol. 75, no. 7, 2007
10. Size-dependent modifications of the Raman spectrum of rutile TiO[sub 2]
    Applied Physics Letters, vol. 89, no. 16, p. 163118, 2006
11. Characterization of intermetallic particles in a Mg–8Zn–4Al–0.5Ca (wt%) casting alloy
    Philosophical Magazine Letters, vol. 86, no. 12, pp. 755–762, 2006
12. Size-Dependent Pressure-Induced Amorphization in Nanoscale TiO_{2}
    Physical Review Letters, vol. 96, no. 13, 2006
13. Slow strain rate testing for monitoring cracking of mild steels for vessels and pipes for processing using caustic solutions
    International Journal of Pressure Vessels and Piping, vol. 83, no. 5, pp. 399–404, 2006
14. Nonlinear size dependence of anatase TiO[sub 2] lattice parameters
    Applied Physics Letters, vol. 88, no. 24, p. 243103, 2006
15. Nanoresolution profiling of metal-metal interfaces from x-ray Fraunhofer diffraction data
    Applied Physics Letters, vol. 88, no. 26, p. 263113, 2006
16. An alternative approach to the crystallography of martensitic transformation in ZrO2
    Materials Science and Engineering: A, vol. 438-440, pp. 343–345, 2006
17. Application of quantitative X-ray phase retrieval from Fraunhofer diffraction data to nano-resolution profiling of materials
    Optics Communications, vol. 251, no. 1-3, pp. 100–108, 2005
18. Precipitation-hardened Mg–Ca–Zn alloys with superior creep resistance
    Scripta Materialia, vol. 53, no. 12, pp. 1321–1326, 2005
19. Nano-resolution profiling of micro-structures using quantitative X-ray phase retrieval from Fraunhofer diffraction data
    Physics Letters A, vol. 335, no. 5-6, pp. 494–498, 2005
20. Finite-size and pressure effects on the Raman spectrum of nanocrystalline anatase TiO_{2}
    Physical Review B, vol. 71, no. 18, 2005
21. Assisted nucleation of θ′ phase in Al–Cu–Sn: the modified crystallography of tin precipitates
    Philosophical Magazine, vol. 85, no. 29, pp. 3487–3509, 2005
22. Identification of Metastable Rod-Like Particles in an Isothermally Aged Al–10Mg–0.5Ag (mass%) Alloy
    MATERIALS TRANSACTIONS, vol. 46, no. 6, pp. 1288–1294, 2005
23. Stimulation of the Ω phase in an Al–1.1 at.% Cu–0.5 at.% Mg alloy by a duplex ageing treatment involving initial natural ageing
    Philosophical Magazine Letters, vol. 85, no. 4, pp. 193–201, 2005
24. Effect of Trace Additions of Ag on Precipitation in Al–Mg Alloys
    MATERIALS TRANSACTIONS, vol. 46, no. 12, pp. 2968–2974, 2005
25. Formation of Quasicrystalline Particles in an Isothermally Aged Al-10 Mg-0.5 Ag (mass%) Alloy
    MATERIALS TRANSACTIONS, vol. 46, no. 2, pp. 365–368, 2005
26. Characterisation of Quasicrystalline Particles in an Isothermally Aged Al–10Mg–0.5Ag (mass%) Alloy
    MATERIALS TRANSACTIONS, vol. 46, no. 6, pp. 1278–1287, 2005
27. Characterisation of Precipitation Hardening Response and As-Quenched Microstructures in Al-Mg(-Ag) Alloys
    MATERIALS TRANSACTIONS, vol. 45, no. 12, pp. 3256–3263, 2004
28. Caustic stress corrosion cracking of a graphite cast iron component
    Engineering Failure Analysis, vol. 11, no. 2, pp. 199–206, 2004
29. Sintered hydroxyfluorapatites—IV: the effect of fluoride substitutions upon colonisation of hydroxyapatites by mouse embryonic stem cells
    Biomaterials, vol. 25, no. 20, pp. 4977–4986, 2004
30. Stress corrosion cracking of vessels and pipes for alumina processing in aggressive caustic solutions
    International Journal of Pressure Vessels and Piping, vol. 81, no. 6, pp. 557–561, 2004
31. Structure and stability of a new ternary hexagonal phase in Al3 Ti-based Al-Ti-V alloys
    Metallurgical and Materials Transactions A, vol. 34, no. 3, pp. 491–501, 2003
32. Caustic stress corrosion cracking of a spheroidal graphite cast iron: characterisation of ex-service component
    Materials Science and Technology, vol. 19, no. 12, pp. 1746–1750, 2003
33. Caustic stress corrosion cracking of a spheroidal graphite cast iron: laboratory investigation
    Materials Science and Technology, vol. 19, no. 12, pp. 1751–1754, 2003
34. Journal of Materials Science, vol. 38, no. 6, pp. 1161–1169, 2003
35. Investigation of caustic stress corrosion cracking of a carbon steel by slow strain rate testing
    Materials Science and Technology, vol. 19, no. 5, pp. 642–644, 2003
36. The effect of Cu addition on the microstructure and low-temperature magnetization of nanocrystalline Fe _{87  x} Zr ₇ B ₆ Cu _x and Fe _{81  x} Zr ₇ B ₁₂ Cu _x alloys
    Journal of Physics D: Applied Physics, vol. 36, no. 3, pp. 223–228, 2003
37. Formation of bainite as a diffusional–displacive phase transformation
    Scripta Materialia, vol. 47, no. 3, pp. 187–192, 2002
38. Aspects of the surface relief definition of bainite
    Scripta Materialia, vol. 47, no. 3, pp. 207–212, 2002
39. Effect of composition and austenite deformation on the transformation characteristics of low-carbon and ultralow-carbon microalloyed steels
    Metallurgical and Materials Transactions A, vol. 33, no. 5, pp. 1331–1349, 2002
40. High temperature oxidation in the context of life assessment and microstructural degradation of weldments of 2.25Cr?1Mo steel
    International Journal of Pressure Vessels and Piping, vol. 79, no. 8-10, pp. 585–590, 2002
41. On the form of the age-hardening response in high strength aluminium alloys
    Materials Science and Engineering A, vol. 319-321, pp. 448–451, 2001
42. Characterization of quasicrystalline primary intermetallic particles in Mg–8wt%Zn–4wt%Al casting alloy
    Philosophical Magazine Letters, vol. 81, no. 10, pp. 709–718, 2001
43. The crystal structure of the equilibrium Φ phase in Mg–Zn–Al casting alloys
    Acta Materialia, vol. 49, no. 14, pp. 2701–2711, 2001
44. Ductile-to-brittle fracture transitions in 8090 Al–Li alloys
    Acta Materialia, vol. 49, no. 15, pp. 2863–2874, 2001
45. A study of deformation substructures in austenite using a model Ni–30 wt.% Fe alloy
    Scripta Materialia, vol. 45, no. 1, pp. 25–32, 2001
46. Characterisation of precipitate phases in magnesium alloys using electron microdiffraction
    Micron, vol. 32, no. 8, pp. 857–863, 2001
47. Journal of Physics D: Applied Physics, vol. 34, no. 18, pp. 2845–2853, 2001
48. Journal of Applied Electrochemistry, vol. 30, no. 6, pp. 641–646, 2000
49. Diffusion layer parameters influencing optimal fuel cell performance
    Journal of Power Sources, vol. 86, no. 1-2, pp. 250–254, 2000
50. Characterisation of strengthening precipitate phases in a Mg–Y–Nd alloy
    Acta Materialia, vol. 48, no. 8, pp. 1691–1703, 2000
51. Comments on the “dislocation interaction with semicoherent precipitates (ω phase) in deformed Al-Cu-Mg-Ag alloy”
    Scripta Materialia, vol. 42, no. 4, pp. 409–413, 2000
52. Chemistry of Materials, vol. 12, no. 4, pp. 917–922, 2000
53. Role of high temperature corrosion in life assessment and microstructural degradation of Cr–Mo steel weldments
    International Journal of Pressure Vessels and Piping, vol. 77, no. 2-3, pp. 117–123, 2000
54. Fabrication of La1−xSrxGa1−yMgyO3−(x+y)/2 thin films by pulsed laser ablation
    Solid State Ionics, vol. 135, no. 1-4, pp. 397–402, 2000
55. Fabrication of La1−xSrxGa1−yMgyO3−(x+y)/2 thin films by electrophoretic deposition and its conductivity measurement
    Solid State Ionics, vol. 128, no. 1-4, pp. 111–115, 2000
56. Analysis and characterisation of ultra-fine ferrite produced during a new steel strip rolling process
    Scripta Materialia, vol. 40, no. 4, pp. 433–438, 1999
57. Precipitation in magnesium alloy WE54 during isothermal ageing at 250°C
    Scripta Materialia, vol. 40, no. 10, pp. 1089–1094, 1999
58. On recent developments in the debate about the formation mechanism of precipitate plates
    Scripta Materialia, vol. 41, no. 2, pp. 203–208, 1999
59. Microstructural design and mechanical properties of a ternary partially stabilised zirconia alloy
    Ceramics International, vol. 24, no. 1, pp. 45–51, 1998
60. Toward the overthrow of half of a major paradigm for interfacial structure deduction, with special attention to the massive transformation in Ti-46.5 A/O Al alloy
    Scripta Materialia, vol. 39, no. 4-5, pp. 637–645, 1998
61. Thermal Stability of Calcium ?-sialon Ceramics
    Journal of the European Ceramic Society, vol. 18, no. 4, pp. 417–427, 1998
62. Intermediate phases and phase relations in the composition range Al3(Ti,V) to TiAl in the Al–Ti–V system
    Materials Science and Engineering A, vol. 251, no. 1-2, pp. 232–242, 1998
63. Microstructural Design of High-Strength Aluminum Alloys
    Journal of Phase Equilibria, vol. 19, no. 6, pp. 543–551, 1998
64. Precipitation hardening of Mg-Ca(-Zn) alloys
    Scripta Materialia, vol. 37, no. 10, pp. 1475–1481, 1997
65. Journal of Materials Science, vol. 32, no. 12, pp. 3263–3269, 1997
66. High temperature precipitation hardening in a rapidly quenched AlTiNi alloy I. Precipitation hardening response
    Materials Science and Engineering A, vol. 221, no. 1-2, pp. 11–21, 1996
67. High temperature precipitation hardening in a rapidly quenched AlTiNi alloy II. Precipitate characterisation
    Materials Science and Engineering A, vol. 221, no. 1-2, pp. 22–32, 1996
68. Preferred orientation in hot-pressed Ca ?-SiAlON ceramics
    Journal of Materials Science Letters, vol. 15, no. 16, pp. 1447–1449, 1996
69. Precipitation of (Ti,V)2Al(C,N) in multiphase Al-Ti-V alloys
    Materials Science and Engineering A, vol. 207, no. 1, pp. 64–71, 1996
70. Microstructure in rapidly solidified AlTiNi alloys
    Materials Science and Engineering A, vol. 215, no. 1-2, pp. 92–103, 1996
71. The structure of primary strengthening precipitates in an Al-1.5wt% Cu-4.0wt% Mg-0.5wt% Ag alloy
    Philosophical Magazine Letters, vol. 73, no. 6, pp. 351–358, 1996
72. Preparation of dispersed zirconia barium aluminosilicate composites
    Journal of the European Ceramic Society, vol. 15, no. 8, pp. 787–794, 1995
73. Microstructure in chill-cast Al3Ti-based AlTiV ternary alloys
    Materials Science and Engineering A, vol. 192-193, pp. 233–239, 1995
74. Effects of cold work on precipitation in Al-Cu-Mg-(Ag) and Al-Cu-Li-(Mg-Ag) alloys
    Metallurgical and Materials Transactions A, vol. 26, no. 7, pp. 1659–1671, 1995
75. Identification of M5C2 carbides in ex- service 1Cr-0.5Mo steels
    Metallurgical and Materials Transactions A, vol. 26, no. 3, pp. 509–520, 1995
76. Creep damage of weldments in 1Cr-0.5Mo steels during long term service at elevated temperature
    Scripta Metallurgica et Materialia, vol. 33, no. 3, pp. 355–362, 1995
77. Preparation of fine-grained calcium ?-sialon
    Journal of Materials Science Letters, vol. 13, no. 22, pp. 1612–1615, 1994
78. Characterization of the ξ-carbide in ex-service 1Cr-0.5 Mo steels
    Micron, vol. 25, no. 6, pp. 499–503, 1994
79. Analytical electron microscopy of a reaction-bonded Si3N4-based ceramic containing oxide additions
    Micron, vol. 25, no. 6, pp. 617–621, 1994
80. Application of the theory of martensite crystallography to displacive phase transformations in substitutional nonferrous alloys
    Metallurgical and Materials Transactions A, vol. 25, no. 9, pp. 1841–1856, 1994
81. Development of high temperature dispersion strengthening in rapidly quenched AlTiX alloys
    Materials Science and Engineering A, vol. 179-180, pp. 619–624, 1994
82. Precipitate stability in Al_Cu_Mg_Ag alloys aged at high temperatures
    Acta Metallurgica et Materialia, vol. 42, no. 5, pp. 1715–1725, 1994
83. Microstructure in rapidly solidified Al_Ti alloys
    Materials Science and Engineering A, vol. 169, no. 1-2, pp. 135–147, 1993
84. Identification of carbonitride precipitates in a 1wt.%Cr0.5wt.%Mo steel using analytical electron microscopy
    Materials Science and Engineering A, vol. 131, no. 1, pp. 123–132, 1991
85. The morphology of precipitates in an Al_Ge alloy—II. Analysis using symmetry
    Acta Metallurgica et Materialia, vol. 38, no. 2, pp. 365–374, 1990
86. The morphology of precipitates in an Al_Ge Alloy—I. experimental observations
    Acta Metallurgica et Materialia, vol. 38, no. 2, pp. 351–363, 1990
87. The precipitate Ω phase in Al-Cu-Mg-Ag alloys
    Acta Metallurgica, vol. 37, no. 3, pp. 777–789, 1989
88. Analytical electron microscopy studies of the β2 → α1 (“bainite”) transformation in AN Ag-45 at.% Cd alloy
    Acta Metallurgica, vol. 36, no. 8, pp. 2095–2106, 1988
89. The crystallography of the precipitation of Ti5Si3 in Ti-Si alloys
    Acta Metallurgica, vol. 36, no. 2, pp. 299–310, 1988
90. Crystallography of the Tetragonal to Monoclinic Transformation in MgO-Partially-Stabilized Zirconia
    Journal of the American Ceramic Society, vol. 69, no. 7, pp. 547–555, 1986
91. Precipitation in a liquid phase sintered W_Ni_Fe alloy
    Acta Metallurgica, vol. 33, no. 12, pp. 2119–2128, 1985
92. Phase transformations in ion-mixed metastable (GaSb)1−x(Ge2)x semiconducting alloys
    Journal of Applied Physics, vol. 55, no. 12, p. 4177, 1984
93. A comparison of the microstructures of As-cast and laser surface melted Ti-8Al-4Y
    Metallurgical Transactions A, vol. 14, no. 10, pp. 1979–1988, 1983
94. Segregation to interphase boundaries in liquid-phase sintered tungsten alloys
    Metallurgical Transactions A, vol. 14, no. 3, pp. 667–677, 1983
95. Formation and thermal stability of an oxide dispersion in a rapidly solified Ti_Er alloy
    Scripta Metallurgica, vol. 17, no. 7, pp. 963–966, 1983
96. Experimental studies of the crystallography of the precipitation of β vanadium hydride
    Acta Metallurgica, vol. 25, no. 8, pp. 829–838, 1977
97. The crystallography of the precipitation of β vanadium hydride
    Acta Metallurgica, vol. 25, no. 5, pp. 513–520, 1977
98. The shape strain of the (225)F martensite transformation
    Acta Metallurgica, vol. 24, no. 5, pp. 371–380, 1976