Personal Home Page

http://www.mse.berkeley.edu/faculty/DeJonghe/LutDeJonghe.html

Articles in Scholarly Journals [Incomplete List]

1. Crystal Structures of and Displacive Transitions in OsN2, IrN2, RuN2, and RhN2
   Angewandte Chemie International Edition, vol. 46, no. 7, pp. 1136–1140, 2007
2. Water-based binder system for SOFC porous steel substrates
   Journal of Materials Processing Technology, vol. 182, no. 1-3, pp. 469–476, 2007
3. Y-doped SrTiO3 based sulfur tolerant anode for solid oxide fuel cells
   Journal of Power Sources, vol. 164, no. 2, pp. 510–518, 2007
4. Synthesis and characterization of mixed-morphology CePO4 nanoparticles
   Journal of Solid State Chemistry, vol. 180, no. 3, pp. 840–846, 2007
5. Proton-Transfer Mechanism in LaPO4
   Journal of Physical Chemistry C, vol. 111, no. 29, pp. 11003–11007, 2007
6. Proton transport paths in lanthanum phosphate electrolytes
   Solid State Ionics, vol. 178, no. 11-12, pp. 769–773, 2007
7. Prediction and evaluation of sintering aids for Cerium Gadolinium Oxide
   Solid State Ionics, vol. 178, no. 19-20, pp. 1187–1194, 2007
8. Nanostructured Solid Oxide Fuel Cell Electrodes
   Nano Letters, vol. 7, no. 7, pp. 2136–2141, 2007
9. Elastic constants and tensile properties of Al_{2}OC by density functional calculations
   Physical Review B, vol. 75, no. 10, 2007
10. Ceria Nanocoating for Sulfur Tolerant Ni-Based Anodes of Solid Oxide Fuel Cells
    Electrochemical and Solid-State Letters, vol. 10, no. 9, p. B135, 2007
11. Synthesis and Stability of a Nanoparticle-Infiltrated Solid Oxide Fuel Cell Electrode
    Electrochemical and Solid-State Letters, vol. 10, no. 4, p. B74, 2007
12. B-Site Doping and Catalytic Activity of Sr(Y)TiO[sub 3]
    Journal of The Electrochemical Society, vol. 154, no. 9, p. B949, 2007
13. LSM-YSZ Cathodes with Reaction-Infiltrated Nanoparticles
    Journal of The Electrochemical Society, vol. 153, no. 6, p. A1115, 2006
14. LSM-Infiltrated Solid Oxide Fuel Cell Cathodes
    Electrochemical and Solid-State Letters, vol. 9, no. 8, p. A376, 2006
15. A fundamental study of chromium deposition on solid oxide fuel cell cathode materials
    Journal of Power Sources, vol. 160, no. 1, pp. 130–138, 2006
16. A braze system for sealing metal-supported solid oxide fuel cells
    Journal of Power Sources, vol. 160, no. 2, pp. 1049–1057, 2006
17. Metal-supported solid oxide fuel cell membranes for rapid thermal cycling
    Solid State Ionics, vol. 176, no. 5-6, pp. 443–449, 2005
18. Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical properties
    Solid State Ionics, vol. 176, no. 5-6, pp. 425–433, 2005
19. Ionic conductivity of stabilized zirconia networks in composite SOFC electrodes
    Solid State Ionics, vol. 176, no. 15-16, pp. 1359–1364, 2005
20. Catalyst-infiltrated supporting cathode for thin-film SOFCs
    Solid State Ionics, vol. 176, no. 5-6, pp. 451–456, 2005
21. Thin film SOFCs with cobalt-infiltrated cathodes
    Solid State Ionics, vol. 176, no. 3-4, pp. 275–279, 2005
22. Nano Letters, vol. 5, no. 6, pp. 1035–1037, 2005
23. Single Chamber Fuel Cells: Flow Geometry, Rate, and Composition Considerations
    Electrochemical and Solid-State Letters, vol. 7, no. 7, p. A198, 2004
24. Aluminum-containing intergranular phases in hot-pressed silicon carbide
    Journal of Materials Research, vol. 19, no. 8, pp. 2510–2516, 2004
25. Metal-Supported Solid Oxide Fuel Cells
    Electrochemical and Solid-State Letters, vol. 6, no. 9, p. A178, 2003
26. Microstructure development in hot-pressed silicon carbide: effects of aluminum, boron, and carbon additives
    Acta Materialia, vol. 51, no. 13, pp. 3849–3860, 2003
27. SUPPORTED ELECTROLYTE THIN FILM SYNTHESIS OF SOLID OXIDE FUEL CELLS*
    Annual Review of Materials Research, vol. 33, no. 1, pp. 169–182, 2003
28. Ambient to high-temperature fracture toughness and cyclic fatigue behavior in Al-containing silicon carbide ceramics
    Acta Materialia, vol. 51, no. 20, pp. 6477–6491, 2003
29. Modelling and Simulation in Materials Science and Engineering, vol. 10, no. 2, pp. 103–119, 2002
30. Energy dispersive spectroscopy analysis of aluminium segregation in silicon carbide grain boundaries
    Journal of Microscopy, vol. 207, no. 1, pp. 58–68, 2002
31. A High-Rate Manganese Oxide for Rechargeable Lithium Battery Applications
    Journal of The Electrochemical Society, vol. 148, no. 3, p. A230, 2001
32. Journal of Materials Science, vol. 36, no. 22, pp. 5447–5455, 2001
33. Mechanical properties of polytypoidally joined Si3N4–Al2O3
    Acta Materialia, vol. 49, no. 18, pp. 3767–3773, 2001
34. Role of the grain-boundary phase on the elevated-temperature strength, toughness, fatigue and creep resistance of silicon carbide sintered with Al, B and C
    Acta Materialia, vol. 48, no. 18-19, pp. 4599–4608, 2000
35. Preparation of nanospherical amorphous zircon powders by a microemulsion-mediated process
    Journal of Materials Chemistry, vol. 10, no. 12, pp. 2786–2790, 2000
36. The Journal of Physical Chemistry B, vol. 104, no. 15, pp. 3476–3480, 2000
37. Transport properties of binary salt polymer electrolytes
    Journal of Power Sources, vol. 89, no. 2, pp. 227–231, 2000
38. Transport Properties of a High Molecular Weight Poly(propylene oxide)-LiCF[sub 3]SO[sub 3] System
    Journal of The Electrochemical Society, vol. 146, no. 6, p. 2024, 1999
39. Transport Property and Raman Spectroscopic Studies of the Polymer Electrolyte System P(EO)[sub n]-NaTFSI
    Journal of The Electrochemical Society, vol. 145, no. 5, p. 1586, 1998
40. Controlling interface chemistry and structure to process and toughen silicon carbide
    Acta Materialia, vol. 46, no. 7, pp. 2471–2477, 1998
41. The roles of amorphous grain boundaries and the ß–a transformation in toughening SiC
    Acta Materialia, vol. 46, no. 5, pp. 1625–1635, 1998
42. Silicon nitride: From sintering to joining
    Acta Materialia, vol. 46, no. 7, pp. 2401–2405, 1998
43. Silicon nitride joining using rare-earth reaction sintering
    Scripta Materialia, vol. 36, no. 4, pp. 455–460, 1997
44. Thin-film solid oxide fuel cell with high performance at low-temperature
    Solid State Ionics, vol. 98, no. 1-2, pp. 57–61, 1997
45. Effect of Electrolyte Composition on the Performance of Sodium/Polymer Cells
    Journal of The Electrochemical Society, vol. 144, no. 2, p. L20, 1997
46. Initial Coarsening and Microstructural Evolution of Fast-Fired and MgO-Doped Al2O3
    Journal of the American Ceramic Society, vol. 80, no. 11, pp. 2891–2896, 1997
47. Reduced-Temperature Solid Oxide Fuel Cell Based on YSZ Thin-Film Electrolyte
    Journal of The Electrochemical Society, vol. 144, no. 3, p. L35, 1997
48. Journal of Materials Science, vol. 32, no. 22, pp. 6075–6084, 1997
49. Journal of Materials Science, vol. 32, no. 22, pp. 6001–6008, 1997
50. Sintering of Nanophase gamma-Al2O3 Powder
    Journal of the American Ceramic Society, vol. 79, no. 8, pp. 2207–2211, 1996
51. In Situ Toughened Silicon Carbide with Al-B-C Additions
    Journal of the American Ceramic Society, vol. 79, no. 2, pp. 461–469, 1996
52. Silicon Carbide Platelet/Silicon Carbide Composites
    Journal of the American Ceramic Society, vol. 78, no. 1, pp. 97–103, 1995
53. Reaction Sintering of ZnO-AI2O3
    Journal of the American Ceramic Society, vol. 78, no. 12, pp. 3217–3224, 1995
54. The Measurement of a Complete Set of Transport Properties for a Concentrated Solid Polymer Electrolyte Solution
    Journal of The Electrochemical Society, vol. 142, no. 6, p. 1859, 1995
55. Processing and Properties of Particulate Composites from Coated Powders
    Journal of the American Ceramic Society, vol. 78, no. 1, pp. 199–204, 1995
56. Thin film solid state sodium batteries for electric vehicles
    Electrochimica Acta, vol. 40, no. 13-14, pp. 2205–2210, 1995
57. Oxidation behaviour of reaction-bonded alumina compacts using an Al88Si12 alloy precursor
    Journal of Materials Science, vol. 29, no. 16, pp. 4177–4183, 1994
58. Presintering Heat Treatment, Densification, and Mechanical Properties of Silicon Carbide
    Journal of the American Ceramic Society, vol. 77, no. 6, pp. 1685–1687, 1994
59. Influence of Nd2O3 Doping on the Reaction Process and Sintering Behavior of BaCeO3 Ceramics
    Journal of the American Ceramic Society, vol. 77, no. 10, pp. 2523–2528, 1994
60. Orthorhombic Na[sub x]MnO[sub 2] as a Cathode Material for Secondary Sodium and Lithium Polymer Batteries
    Journal of The Electrochemical Society, vol. 141, no. 11, p. L145, 1994
61. Rechargeable Na∕Na[sub x]CoO[sub 2] and Na[sub 15]Pb[sub 4]∕Na[sub x]CoO[sub 2] Polymer Electrolyte Cells
    Journal of The Electrochemical Society, vol. 140, no. 10, p. 2726, 1993
62. Reaction Sintering of Zinc Ferrite during Constant Rates of Heating
    Journal of the American Ceramic Society, vol. 76, no. 7, pp. 1739–1744, 1993
63. Properties and morphology of doped polycrystalline Na-ß?-alumina electrolytes
    Solid State Ionics, vol. 62, no. 3-4, pp. 185–191, 1993
64. Four probe polarization techniques and the application to investigations of solid-state electrochemical devices
    Electrochimica Acta, vol. 38, no. 9, pp. 1289–1300, 1993
65. Polyorganodisulfide electrodes for solid-state batteries and electrochromic devices
    Solid State Ionics, vol. 60, no. 1-3, pp. 175–187, 1993
66. Metal-coated colloidal particles
    Journal of Materials Science, vol. 28, no. 13, pp. 3427–3432, 1993
67. The use of redox polymerization electrodes in lithium batteries with liquid electrolytes
    Journal of Applied Electrochemistry, vol. 22, no. 3, pp. 307–309, 1992
68. Thin-film ceramic electrolytes deposited on porous and non-porous substrates by sol-gel techniques
    Solid State Ionics, vol. 52, no. 1-3, pp. 251–259, 1992
69. The Use of Polydisulfides and Copolymeric Disulfides in the Li/PEO/SRPE Battery System
    Journal of The Electrochemical Society, vol. 139, no. 8, p. 2077, 1992
70. Processing of diamond/alumina composites for low wear applications
    Journal of Materials Research, vol. 7, no. 11, Article ID 1992.3010, 8 pages, 1992
71. Novel Solid Redox Polymerization Electrodes
    Journal of The Electrochemical Society, vol. 138, no. 7, p. 1891, 1991
72. Novel Solid Redox Polymerization Electrodes
    Journal of The Electrochemical Society, vol. 138, no. 7, p. 1896, 1991
73. Effect of Green Density on Densification and Creep During Sintering
    Journal of the American Ceramic Society, vol. 74, no. 3, pp. 514–519, 1991
74. Travelling solvent zone texturing of ceramic superconductor thick films
    Journal of Materials Science Letters, vol. 10, no. 7, pp. 369–370, 1991
75. Sintering of Ceramic Particulate Composites: Effect of Matrix Density
    Journal of the American Ceramic Society, vol. 74, no. 2, pp. 433–436, 1991
76. Particulate composites from coated powders
    Journal of the European Ceramic Society, vol. 7, no. 6, pp. 345–351, 1991
77. Low-temperature sintering of zinc oxide varistors
    Journal of Materials Science, vol. 25, no. 1, pp. 737–742, 1990
78. Pore size distribution during compaction and early stage sintering of silicon nitride
    Journal of Materials Science, vol. 25, no. 3, pp. 1686–1689, 1990
79. Electrode Kinetics of Organodisulfide Cathodes for Storage Batteries
    Journal of The Electrochemical Society, vol. 137, no. 3, p. 750, 1990
80. Sintering of Particulate Composites under a Uniaxial Stress
    Journal of the American Ceramic Society, vol. 73, no. 3, pp. 602–606, 1990
81. Sintering of Spherical Glass Powder under a Uniaxial Stress
    Journal of the American Ceramic Society, vol. 73, no. 3, pp. 707–712, 1990
82. Microencapsulation of silicon nitride particles with yttria and yttria-alumina precursors
    Journal of Materials Research, vol. 5, no. 1, Article ID 1990.0136, 6 pages, 1990
83. Ambient Temperature High-Rate Lithium/Organosulfur Batteries
    Journal of The Electrochemical Society, vol. 137, no. 4, p. 1191, 1990
84. Acoustic emission study of microcracking in 123-type ceramic superconductors
    Journal of Materials Research, vol. 5, no. 10, Article ID 1990.2066, 8 pages, 1990
85. Effect of geometry and interfacial resistance on current distribution and energy dissipation at metal/superconductor junctions
    Journal of Materials Research, vol. 4, no. 3, Article ID 1989.0530, 8 pages, 1989
86. A Novel Class of Organosulfur Electrodes for Energy Storage
    Journal of The Electrochemical Society, vol. 136, no. 3, p. 661, 1989
87. Electrochemical Properties of Organic Disulfide/Thiolate Redox Couples
    Journal of The Electrochemical Society, vol. 136, no. 9, p. 2570, 1989
88. Effect of temperature on the densification/creep viscosity during sintering
    Acta Metallurgica, vol. 37, no. 5, pp. 1415–1420, 1989
89. Pore size distribution, grain growth, and the sintering stress
    Journal of Materials Science, vol. 24, no. 12, pp. 4403–4408, 1989
90. Ceramic processing for magnetic applications
    Materials Science and Engineering B, vol. 3, no. 4, pp. 427–429, 1989
91. Sintering stress of homogeneous and heterogeneous powder compacts
    Acta Metallurgica, vol. 36, no. 1, pp. 223–229, 1988
92. Chemical Stability of Sodium Betaʺ-Alumina Electrolyte in Sulfur/Sodium Polysulfide Melts
    Journal of The Electrochemical Society, vol. 135, no. 3, p. 741, 1988
93. Oxygen Activity and Asymmetric Polarization at the Sodium/Beta"-Alumina Interface
    Journal of The Electrochemical Society, vol. 134, no. 5, p. 1121, 1987
94. Creep-sintering of zinc oxide
    Journal of Materials Science, vol. 22, no. 12, pp. 4326–4330, 1987
95. Creep and Densification During Sintering of Glass Powder Compacts
    Journal of the American Ceramic Society, vol. 70, no. 10, pp. 766–774, 1987
96. Creep-Sintering and Microstructure Development of Heterogeneous MgO Compacts
    Journal of the American Ceramic Society, vol. 70, no. 5, pp. 360–366, 1987
97. Effect of Shear Stress on Sintering
    Journal of the American Ceramic Society, vol. 69, no. 1, pp. 53–58, 1986
98. Creep During Sintering of Porous Compacts
    Journal of the American Ceramic Society, vol. 69, no. 1, pp. 58–60, 1986
99. Zirconia-toughened sodium beta?-alumina solid electrolyte
    Journal of Materials Science, vol. 21, no. 12, pp. 4221–4226, 1986
100. Transient stresses in bimodal compacts during sintering
     Acta Metallurgica, vol. 34, no. 7, pp. 1467–1471, 1986
101. Time-Dependent Degradation in Sodium-Beta" Alumina Solid Electrolytes
     Journal of The Electrochemical Society, vol. 133, no. 2, p. 355, 1986
102. Oxygen Depletion and Slow Crack Growth in Sodium Beta"-Alumina Solid Electrolytes
     Journal of The Electrochemical Society, vol. 133, no. 1, p. 6, 1986
103. Rearrangement During Sintering in Two-Dimensional Arrays
     Journal of the American Ceramic Society, vol. 69, no. 11, pp. 822–826, 1986
104. Solid electrolyte degradation with applied stress
     Journal of Materials Science Letters, vol. 4, no. 6, pp. 753–754, 1985
105. Subcutectic Densification and Second-Phase Formation in Al2O3-Cao
     Journal of the American Ceramic Society, vol. 68, no. 7, pp. 385–388, 1985
106. Structure and non-stoichiometry of calcium aluminates
     Philosophical Magazine A, vol. 48, no. 2, pp. 287–297, 1983
107. Pre-eutectic densification in MgF2_CaF2
     Ceramics International, vol. 9, no. 4, pp. 123–126, 1983
108. Oxygen interstitial transport and chemical coloration in sodium-beta alumina
     Solid State Ionics, vol. 9-10, pp. 165–168, 1983
109. Fracture Toughness Anisotropy of Sodium beta- Alumina
     Journal of the American Ceramic Society, vol. 66, no. 11, pp. c204–c205, 1983
110. Surface Oxygen Chemical Potential in a Gas-Solid Reaction
     Journal of The Electrochemical Society, vol. 130, no. 11, p. 2263, 1983
111. Degradation of Sodium βʺ-Alumina: Effect of Microstructure
     Journal of The Electrochemical Society, vol. 130, no. 5, p. 1042, 1983
112. Transport Number Gradients and Solid Electrolyte Degradation
     Journal of The Electrochemical Society, vol. 129, no. 4, p. 752, 1982
113. Impurities and solid electrolyte failure
     Solid State Ionics, vol. 7, no. 1, pp. 61–64, 1982
114. Chemical stability of Nasicon
     Solid State Ionics, vol. 6, no. 1, pp. 57–63, 1982
115. Chemical colouration of sodium beta-aluminas
     Journal of Materials Science, vol. 17, no. 3, pp. 885–892, 1982
116. Initiation of mode I degradation in sodium-beta alumina electrolytes
     Journal of Materials Science, vol. 17, no. 2, pp. 517–524, 1982
117. Hydrogen reduction of cobalt ferrite
     Metallurgical Transactions B, vol. 12, no. 2, pp. 299–309, 1981
118. Failure modes of Na-beta alumina
     Solid State Ionics, vol. 5, pp. 267–269, 1981
119. Reduction kinetics and microstructures of Al3+-containing cobalt ferrites
     Journal of Materials Science, vol. 15, no. 9, pp. 2241–2252, 1980
120. Some geometrical aspects of breakdown of sodium beta alumina
     Materials Research Bulletin, vol. 14, no. 5, pp. 589–595, 1979
121. Grain boundaries and ionic conduction in sodium beta alumina
     Journal of Materials Science, vol. 14, no. 1, pp. 33–48, 1979
122. Fast Ion Conductors
     Journal of the American Ceramic Society, vol. 62, no. 5-6, pp. 289–293, 1979
123. Planar [00. l] disorder in sodium beta alumina
     Journal of Materials Science, vol. 12, no. 3, pp. 497–502, 1977
124. Spinel formation in sodium-ß?-alumina
     Materials Research Bulletin, vol. 12, no. 6, pp. 667–674, 1977
125. Auger spectroscopy of grain boundaries in calcium-doped sodium beta-alumina
     Journal of Materials Science, vol. 12, no. 4, pp. 739–742, 1977
126. Low-angle tilt boundaries and inhomogeneous current densities in sodium beta alumina
     Journal of Materials Science, vol. 11, no. 2, pp. 206–208, 1976
127. Ion current concentration in grain boundaries of sodium beta alumina
     Scripta Metallurgica, vol. 10, no. 4, pp. 285–287, 1976
128. Complex faults in sodium beta alumina
     Journal of Materials Science, vol. 10, no. 12, pp. 2173–2175, 1975