Articles in Scholarly Journals [Incomplete List]

1. A generalised technique for fracture analysis of cracked plates under combined tensile, bending and shear loads
   Computers & Structures, vol. 84, no. 29-30, pp. 2050–2064, 2006
2. New a posteriori error estimator and adaptive mesh refinement strategy for 2-D crack problems
   Engineering Fracture Mechanics, vol. 73, no. 6, pp. 802–819, 2006
3. Fracture Analysis of Delaminated Composite Panels in Compression Using Numerically Integrated MVCCI
   Mechanics of Advanced Materials and Structures, vol. 13, no. 4, pp. 303–315, 2006
4. Dynamics of Flexible Structures With Nonlinear Joints
   Journal of Vibration and Acoustics, vol. 126, no. 1, p. 92, 2004
5. Experimental study of failure and failure progression in T-stiffened skins
   Composite Structures, vol. 64, no. 2, pp. 227–234, 2004
6. Comparative efficiencies of three parallel algorithms for nonlinear implicit transient dynamic analysis
   Sadhana, vol. 29, no. 1, pp. 57–81, 2004
7. A new parallel overlapped domain decomposition method for nonlinear dynamic finite element analysis
   Computers & Structures, vol. 81, no. 26-27, pp. 2441–2454, 2003
8. The effect of T-stress on plane strain dynamic crack growth in elastic-plastic materials
   Fatigue Fracture of Engineering Materials and Structures, vol. 26, no. 7, pp. 647–660, 2003
9. Effect of T-stress and loading rate on crack initiation in rate sensitive plastic materials
   International Journal of Solids and Structures, vol. 39, no. 7, pp. 1757–1775, 2002
10. International Journal of Fracture, vol. 116, no. 2, pp. 141–160, 2002
11. A numerical study of T-stress in dynamically loaded fracture specimens
    International Journal of Solids and Structures, vol. 38, no. 28-29, pp. 4987–5005, 2001
12. Decomposed crack closure integrals for estimation of SIF variations
    Engineering Fracture Mechanics, vol. 63, no. 2, pp. 165–178, 1999
13. A study of the behaviour of subinterface cracks in bimaterial plates
    Engineering Fracture Mechanics, vol. 59, no. 2, pp. 241–252, 1998
14. Fracture mechanics based design procedures for pressurized components having part-through cracks
    Theoretical and Applied Fracture Mechanics, vol. 27, no. 2, pp. 149–159, 1997
15. Elasto-plastic contact stress analysis of joints subjected to cyclic loading
    Computers & Structures, vol. 60, no. 6, pp. 1067–1077, 1996
16. Generalized modified crack closure integral (GMCCI) and its application to interface crack problems
    Computers & Structures, vol. 60, no. 4, pp. 665–676, 1996
17. Finite element analysis of an interface crack with large crack-tip contact zones
    Engineering Fracture Mechanics, vol. 54, no. 6, pp. 847–860, 1996
18. Certain aspects related to computation by modified crack closure integral (MCCI)
    Engineering Fracture Mechanics, vol. 55, no. 2, pp. 335–339, 1996
19. Analysis of a cracked lug loaded by an interference fit pin
    International Journal of Mechanical Sciences, vol. 38, no. 8-9, pp. 967–979, 1996
20. Analysis of a double shear lap joint with interference fit pin
    Computers & Structures, vol. 55, no. 2, pp. 357–363, 1995
21. Analytical solutions for load transfer through smooth elastic pin in an infinite orthotropic plate
    Composite Structures, vol. 30, no. 3, pp. 329–339, 1995
22. Cracks emanating from pin-loaded lugs
    Engineering Fracture Mechanics, vol. 47, no. 1, pp. 29–38, 1994
23. Finite element estimates of strain energy release rate components at the tip of an interface crack under mode I loading
    Engineering Fracture Mechanics, vol. 49, no. 3, pp. 451–463, 1994
24. MODIFIED CRACK CLOSURE INTEGRAL (MCCI) FOR 3-d PROBLEMS USING 20-NODED BRICK ELEMENTS
    Fatigue & Fracture of Engineering Materials and Structures, vol. 17, no. 2, pp. 145–157, 1994
25. The fatigue crack growth rate in L-72 Al-alloy plate specimens with cold worked holes
    Engineering Fracture Mechanics, vol. 42, no. 6, pp. 989–1000, 1992
26. A field-consistent and variationally correct representation of transverse shear strains in the nine-noded plate element
    Computer Methods in Applied Mechanics and Engineering, vol. 97, no. 3, pp. 355–374, 1992
27. Stress and strength analysis of pin joints in laminated anisotropic plates
    Composite Structures, vol. 19, no. 4, pp. 299–312, 1991
28. An improved iterative finite element solution for pin joints
    Computers & Structures, vol. 36, no. 6, pp. 1121–1128, 1990
29. Modified crack closure integral using six-noded isoparametric quadrilateral singular elements
    Engineering Fracture Mechanics, vol. 36, no. 6, pp. 945–955, 1990
30. Observation of crack closure using a crack mouth opening displacement gauge
    International Journal of Fatigue, vol. 11, no. 1, pp. 37–41, 1989
31. Environmental effects on fibre—Polymer composites
    Polymer Degradation and Stability, vol. 24, no. 4, pp. 361–371, 1989
32. Automated estimation of fatigue crack length and closure/opening stress
    International Journal of Fatigue, vol. 9, no. 1, pp. 51–55, 1987
33. Analysis of flange joints with elastic bolt
    Nuclear Engineering and Design, vol. 100, no. 1, pp. 41–48, 1987
34. Elastic analysis of pin joints in plates under some combined pin and plate loads
    International Journal of Mechanical Sciences, vol. 29, no. 8, pp. 577–585, 1987
35. A large orthotropic plate with misfit pin under arbitrarily oriented biaxial loading
    Composite Structures, vol. 6, no. 4, pp. 271–281, 1986
36. Diffusion Studies on Advanced Fibre Hybrid Composites
    Journal of Reinforced Plastics and Composites, vol. 5, no. 1, pp. 51–61, 1986
37. Analysis of a finite composite plate with smooth rigid pin
    Composite Structures, vol. 4, no. 3, pp. 197–216, 1985
38. Fasteners in composite plates: effects of interfacial friction
    Computers & Mathematics with Applications, vol. 11, no. 10, pp. 1057–1068, 1985
39. Finite element analysis of moving contact in mechanically fastened joints
    Nuclear Engineering and Design, vol. 78, no. 3, pp. 303–311, 1984
40. Photoelastic studies on progress of separation in interference fits
    Experimental Mechanics, vol. 22, no. 1, pp. 8–15, 1982
41. Specification of skew conditions in finite element formulation
    International Journal for Numerical Methods in Engineering, vol. 12, no. 6, pp. 1037–1041, 1978
42. Stress concentration and load diffusion in rectangular panels with constant stress flanges
    Applied Scientific Research, vol. 20, no. 1, pp. 326–337, 1969