John C. Berg

Personal Home Page

http://www.cheme.washington.edu/people/faculty/berg.htm

Articles in Scholarly Journals [Incomplete List]

  1. Novel core–shell (dendrimer) epoxy tougheners: Processing and hot–wet performance
    Composites Part A: Applied Science and Manufacturing, vol. 39, no. 6, pp. 1007–1011, 2008
  2. The effect of α-alumina filler/acrylic–melamine polymer interfacial interactions on the abrasion resistance of an automotive topcoat layer
    Progress in Organic Coatings, vol. 62, no. 2, pp. 214–218, 2008
  3. Effect of Particle Aggregation on the Mechanical Properties of a Reinforced Organic-Inorganic Hybrid Sol-Gel Composite
    Industrial & Engineering Chemistry Research, vol. 47, no. 8, pp. 2623–2629, 2008
  4. An aqueous sol–gel route to prepare organic–inorganic hybrid materials
    Journal of Materials Chemistry, vol. 17, no. 41, p. 4430, 2007
  5. Investigation of the link between micromechanical interparticle bond rigidity measurements and macroscopic shear moduli of colloidal gels
    Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 301, no. 1-3, pp. 137–140, 2007
  6. The effect of additives on the quality of dispersion and physical properties of an automotive coating pigmented with TiO2
    Journal of Adhesion Science and Technology, vol. 21, no. 2, pp. 141–151, 2007
  7. Use of polyethyleneimine dendrimer as a novel graded-modulus interphase material in polymeric composites
    Journal of Adhesion Science and Technology, vol. 21, no. 14, pp. 1375–1393, 2007
  8. Adhesion promotion of poly(phenylene sulfide) to aluminum treated with silane coupling agents
    Journal of Adhesion Science and Technology, vol. 20, no. 2, pp. 197–208, 2006
  9. Using heterogeneous silane patterns to maintain adhesion and decrease water penetration into epoxy/aluminum interfaces
    Journal of Adhesion Science and Technology, vol. 20, no. 14, pp. 1615–1623, 2006
  10. Measuring effective interfacial shear strength in carbon fiber bundle polymeric composites
    Journal of Adhesion Science and Technology, vol. 20, no. 16, pp. 1929–1936, 2006
  11. Spreading on and penetration into thin, permeable print media: Application to ink-jet printing
    Advances in Colloid and Interface Science, vol. 123-126, pp. 439–469, 2006
  12. Enhancement of adhesion to heterogeneously patterned substrates
    Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 273, no. 1-3, pp. 84–89, 2006
  13. Effect of the pigment–polymer interfacial interactions on the mechanical performance of automotive topcoat layers
    Journal of Applied Polymer Science, vol. 101, no. 4, pp. 2261–2268, 2006
  14. High-salt stabilization of Laponite clay particles
    Journal of Colloid and Interface Science, vol. 296, no. 1, pp. 159–164, 2006
  15. Relating clay yield stress to colloidal parameters
    Journal of Colloid and Interface Science, vol. 296, no. 2, pp. 749–755, 2006
  16. The effect of interfacial interaction contribution to the mechanical properties of automotive topcoats
    Progress in Organic Coatings, vol. 54, no. 3, pp. 182–187, 2005
  17. Gel trapping of dense colloids
    Journal of Colloid and Interface Science, vol. 285, no. 1, pp. 152–157, 2005
  18. Transient Aggregation during Dry-Down of Solvent-Borne Dispersions
    Langmuir, vol. 21, no. 22, pp. 9926–9931, 2005
  19. Use of an Optical–Mechanical Test Combined with Acoustic-Emission Techniques to Study Adhesion in Filled Polymeric Composites
    The Journal of Adhesion, vol. 81, no. 7-8, pp. 823–841, 2005
  20. Phase separation at the fiber–matrix interface in composites based on a thermoplastic/polyester blend
    Composite Interfaces, vol. 12, no. 3, pp. 167–186, 2005
  21. Wettability of glass fibers by reactive thermoplastic/polyester blends: comparison between compatible and incompatible blends
    Journal of Adhesion Science and Technology, vol. 19, no. 9, pp. 719–738, 2005
  22. Langmuir, vol. 20, no. 5, pp. 2026–2029, 2004
  23. The effect of vinyl alcohol content on adhesion performance in poly(vinyl butyral)/glass systems
    Journal of Adhesion Science and Technology, vol. 18, no. 9, pp. 1011–1026, 2004
  24. Characterization and adhesion testing of mixed silane-treated surfaces
    Journal of Adhesion Science and Technology, vol. 18, no. 12, pp. 1395–1414, 2004
  25. Aggregate restructuring by polymer solvency effects
    Journal of Colloid and Interface Science, vol. 279, no. 2, pp. 440–446, 2004
  26. A simplified method for predicting the dynamic surface tension of concentrated surfactant solutions
    Journal of Colloid and Interface Science, vol. 260, no. 1, pp. 244–249, 2003
  27. The effective surface energy of heterogeneous solids measured by inverse gas chromatography at infinite dilution
    Journal of Colloid and Interface Science, vol. 260, no. 2, pp. 443–448, 2003
  28. Linear chains and chain-like fractals from electrostatic heteroaggregation
    Journal of Colloid and Interface Science, vol. 260, no. 1, pp. 149–159, 2003
  29. Temperature effects on the rheological properties of current polyether and polysiloxane impression materials during setting
    The Journal of Prosthetic Dentistry, vol. 90, no. 2, pp. 150–161, 2003
  30. Gelation of liquid bridges in spherical agglomeration
    Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 215, no. 1-3, pp. 241–252, 2003
  31. A review of the different techniques for solid surface acid–base characterization
    Advances in Colloid and Interface Science, vol. 105, no. 1-3, pp. 151–175, 2003
  32. Effect of silane coupling agent adsorbate structure on adhesion performance with a polymeric matrix
    Composites Part A: Applied Science and Manufacturing, vol. 34, no. 4, pp. 327–332, 2003
  33. Unexpected behavior between polystyrene and untreated and silane-treated glass beads in filled polymeric composites
    Journal of Applied Polymer Science, vol. 89, no. 2, pp. 521–526, 2003
  34. Structural Evolution of Octyltriethoxysilane Films on Glass Surfaces during Annealing at Elevated Temperature
    Journal of Colloid and Interface Science, vol. 248, no. 1, pp. 96–102, 2002
  35. Effect of moisture on the surface free energy and acid–base properties of mineral oxides
    Journal of Chromatography A, vol. 969, no. 1-2, pp. 59–72, 2002
  36. Langmuir, vol. 18, no. 13, pp. 5074–5082, 2002
  37. Langmuir, vol. 18, no. 9, pp. 3418–3422, 2002
  38. Wettability, imbibition, and mass change of disinfected low-viscosity impression materials
    The Journal of Prosthetic Dentistry, vol. 88, no. 3, pp. 268–276, 2002
  39. Predicting adhesion between a crystalline polymer and silane-treated glass surfaces in filled composites
    Journal of Adhesion Science and Technology, vol. 16, no. 14, pp. 1949–1956, 2002
  40. Langmuir, vol. 17, no. 3, pp. 637–651, 2001
  41. Quantitative Analysis of Fluid Interface–Atomic Force Microscopy
    Journal of Colloid and Interface Science, vol. 235, no. 1, pp. 162–169, 2001
  42. Diffusion-Controlled Adsorption at the Liquid–Air Interface: The Long-Time Limit
    Journal of Colloid and Interface Science, vol. 237, no. 2, pp. 294–296, 2001
  43. Spontaneous spreading of emulsions on solid surfaces: Morphology and dynamics
    Journal of Applied Polymer Science, vol. 81, no. 7, pp. 1817–1825, 2001
  44. Surface Energetics Evolution during Processing of Epoxy Resins
    Journal of Colloid and Interface Science, vol. 222, no. 1, pp. 55–62, 2000
  45. Fractal Heteroaggregation of Oppositely Charged Colloids
    Journal of Colloid and Interface Science, vol. 229, no. 2, pp. 607–614, 2000
  46. Langmuir, vol. 16, no. 5, pp. 2101–2104, 2000
  47. Long-range attraction between silanated silica materials studied by an electrolyte titration with atomic force microscopy
    Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 163, no. 2-3, pp. 247–263, 2000
  48. The use of UNIFAC for the estimation of adhesion enhancement between polymers and mineral surfaces treated with silane coupling agents
    Journal of Adhesion Science and Technology, vol. 14, no. 12, pp. 1471–1484, 2000
  49. Measurement of residual stress effects by means of single-particle composite tests
    Journal of Adhesion Science and Technology, vol. 12, no. 5, pp. 497–506, 1998
  50. Influence of a monofunctional acid-base environment on peel mechanics
    Journal of Adhesion Science and Technology, vol. 12, no. 10, pp. 1091–1103, 1998
  51. Journal of Materials Science Letters, vol. 17, no. 10, pp. 841–843, 1998
  52. The adhesion promotion mechanism of organofunctional silanes
    Journal of Applied Polymer Science, vol. 67, no. 6, pp. 1025–1033, 1998
  53. Oil-assisted agglomeration for toner deinking: Population balance model and experiments
    AIChE Journal, vol. 43, no. 6, pp. 1480–1487, 1997
  54. Langmuir, vol. 13, no. 3, pp. 590–593, 1997
  55. Langmuir, vol. 13, no. 14, pp. 3827–3832, 1997
  56. The effect of organic cosolvent on the aggregation stability of an aqueous polystyrene latex dispersion
    Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 121, no. 1, pp. 89–98, 1997
  57. The role of adhesion in the mechanical properties of filled polymer composites
    Journal of Adhesion Science and Technology, vol. 11, no. 4, pp. 471–493, 1997
  58. The characterization of interfacial strength using single-particle composites
    Journal of Adhesion Science and Technology, vol. 11, no. 8, pp. 1063–1076, 1997
  59. The Stability Behavior of Sol-Emulsion Systems
    Journal of Colloid and Interface Science, vol. 179, no. 2, pp. 618–624, 1996
  60. The role of steric effects in the adsorption of chemically similar probes to a poly(methyl methacrylate) surface
    Journal of Applied Polymer Science, vol. 51, no. 4, pp. 695–699, 1994
  61. Spreading of a droplet on a solid surface
    Journal of Applied Polymer Science, vol. 52, no. 3, pp. 431–435, 1994
  62. Langmuir, vol. 10, no. 2, pp. 454–463, 1994
  63. Langmuir, vol. 10, no. 9, pp. 3086–3093, 1994
  64. The effect of polyelectrolyte dosage on floc formation in protein precipitation by polyelectrolytes
    Chemical Engineering Science, vol. 48, no. 10, pp. 1775–1784, 1993
  65. Dynamic wetting in the low capillary number regime
    Chemical Engineering Science, vol. 47, no. 17-18, pp. 4455–4464, 1992
  66. A comparison of force and optical techniques for the measurement of dynamic contact angles
    Chemical Engineering Science, vol. 47, no. 17-18, pp. 4468–4470, 1992
  67. The aggregation of colloidal particles at the air?water interface
    Journal of Colloid and Interface Science, vol. 152, no. 1, pp. 218–229, 1992
  68. The electrophoretic mobility of a porous aggregate
    Journal of Colloid and Interface Science, vol. 153, no. 1, pp. 237–243, 1992
  69. The steric stabilization of small unilamellar vesicles
    Journal of Colloid and Interface Science, vol. 153, no. 2, pp. 411–419, 1992
  70. The use of photon correlation spectroscopy for estimating the rate constant for doublet formation in an aggregating colloidal dispersion
    Journal of Colloid and Interface Science, vol. 149, no. 2, pp. 528–535, 1992
  71. Langmuir, vol. 8, no. 6, pp. 1532–1537, 1992
  72. Langmuir, vol. 8, no. 11, pp. 2611–2615, 1992
  73. Langmuir, vol. 7, no. 1, pp. 43–45, 1991
  74. Adsorption and reconformation of a series of cationic polyacrylamides on charged surfaces
    Colloids and Surfaces, vol. 53, no. 1, pp. 183–191, 1991
  75. Simulation of particle size distribution in an aggregation-breakup process
    Chemical Engineering Science, vol. 45, no. 9, pp. 3003–3006, 1990
  76. Antifoam action by solid particles
    Journal of Colloid and Interface Science, vol. 127, no. 1, pp. 222–238, 1989
  77. Langmuir, vol. 5, no. 2, pp. 339–342, 1989
  78. Langmuir, vol. 4, no. 4, pp. 1055–1061, 1988
  79. Interactions between surface-active species in evanescent foams
    Chemical Engineering Science, vol. 43, no. 7, pp. 1479–1487, 1988
  80. The effect of surfactants on wicking flow in fiber networks
    Journal of Colloid and Interface Science, vol. 121, no. 1, pp. 22–31, 1988
  81. Characterizing high performance composite processability with dynamic fiber wettability measurements
    Polymer Composites, vol. 9, no. 1, pp. 36–41, 1988
  82. Surface energy of untreated and surface-modified cellulose fibers
    Journal of Applied Polymer Science, vol. 36, no. 3, pp. 523–534, 1988
  83. The effect of adsorbed polymers on the ESA potential of aqueous silica dispersions
    Journal of Colloid and Interface Science, vol. 119, no. 2, pp. 512–517, 1987
  84. The spreading of oil on water in the surface-tension regime
    Journal of Fluid Mechanics, vol. 184, no. -1, p. 445, 1987
  85. Industrial & Engineering Chemistry Fundamentals, vol. 25, no. 4, pp. 668–677, 1986
  86. Electroconvective enhancement of mass or heat exchange between a drop or bubble and surroundings in the presence of an interfacial tension gradient
    AIChE Journal, vol. 31, no. 1, pp. 149–151, 1985
  87. The effect of interfacial tension gradients on the flow structure of single drops or bubbles translating in an electric field
    AIChE Journal, vol. 31, no. 4, pp. 551–557, 1985
  88. THE EFFECT OF EVAPORATIVE VAPOR RECOIL ON THE INSTABILITY OF LIQUID JETS
    Chemical Engineering Communications, vol. 31, no. 1, pp. 289–298, 1984
  89. MARANGONI AND ELECTRIC FIELD EFFECTS UPON MASS TRANSFER TO TRANSLATING DROPS
    Chemical Engineering Communications, vol. 25, no. 1, pp. 117–131, 1984
  90. The effect of electric fields on the absorption of pure sulfur dioxide by water drops
    Chemical Engineering Science, vol. 38, no. 6, pp. 871–876, 1983
  91. Heat and mass transfer to a translating drop in an electric field
    International Journal of Heat and Mass Transfer, vol. 25, no. 7, pp. 1023–1030, 1982
  92. Industrial & Engineering Chemistry Fundamentals, vol. 17, no. 3, pp. 225–227, 1978
  93. Industrial & Engineering Chemistry Fundamentals, vol. 10, no. 3, pp. 526–529, 1971
  94. Industrial & Engineering Chemistry Fundamentals, vol. 8, no. 3, pp. 570–575, 1969