Personal Home Page

http://www.tribo.mech.tohoku.ac.jp/koshi/Top page-E.html

Articles in Scholarly Journals [Incomplete List]

1. Structural characterization and frictional properties of carbon nanotube/alumina composites prepared by precursor method
   Materials Science and Engineering: B, vol. 148, no. 1-3, pp. 265–269, 2008
2. Influence of normal load and sliding speed on the tribological property of amorphous carbon nitride coatings sliding against Si3N4 balls in water
   Surface and Coatings Technology, vol. 202, no. 15, pp. 3519–3528, 2008
3. Tribological Properties of Single-Walled Carbon Nanotube Solids
   Journal of Nanoscience and Nanotechnology, vol. 8, no. 5, pp. 2665–2670, 2008
4. The roughness effect on the frequency of frictional sound
   Tribology International, vol. 40, no. 4, pp. 659–664, 2007
5. Single asperity abrasion of coated nodular cast iron
   Tribology International, vol. 40, no. 2, pp. 170–179, 2007
6. Influence of deposition parameters on surface roughness and mechanical properties of boron carbon nitride coatings synthesized by ion beam assisted deposition
   Thin Solid Films, vol. 497, no. 1-2, pp. 210–217, 2006
7. Sliding friction and wear property of a-C and a-CNx coatings against SiC balls in water
   Thin Solid Films, vol. 514, no. 1-2, pp. 231–239, 2006
8. Comparisons of tribological property of a-C, a-CNx and BCN coatings sliding against SiC balls in water
   Surface and Coatings Technology, vol. 200, no. 14-15, pp. 4471–4478, 2006
9. Wear-mechanism map of amorphous carbon nitride coatings sliding against silicon carbide balls in water
   Surface and Coatings Technology, vol. 200, no. 16-17, pp. 4909–4917, 2006
10. Optimization of the surface texture for silicon carbide sliding in water
    Applied Surface Science, vol. 253, no. 3, pp. 1282–1286, 2006
11. Friction and wear behavior of BCN coatings sliding against ceramic and steel balls in various environments
    Wear, vol. 261, no. 3-4, pp. 301–310, 2006
12. The effect of sliding history on the steady state friction coefficient between CNx coatings under N2 lubrication
    Tribology and Interface Engineering Series, vol. 48, pp. 673–677, 2005
13. Friction control by micro-vibration of a magnetic recording head under micro-load
    Microsystem Technologies, vol. 11, no. 8-10, pp. 830–835, 2005
14. Friction and wear properties of CNx/SiC in water lubrication
    Tribology Letters, vol. 18, no. 2, pp. 153–163, 2005
15. Experimental Evaluation of Friction and Wear Properties of Solid Lubricant Coatings on SUS440C Steel in Liquid Nitrogen
    Tribology Letters, vol. 20, no. 3-4, pp. 263–272, 2005
16. Friction and wear property of a-CN coatings sliding against ceramic and steel balls in water
    Diamond and Related Materials, vol. 14, no. 10, pp. 1711–1720, 2005
17. Static and dynamic characteristics of active-head sliders
    Tribology International, vol. 38, no. 6-7, pp. 717–723, 2005
18. Sensitivity of wear rates in the micro-scale abrasion test to test conditions and material hardness
    Wear, vol. 258, no. 1-4, pp. 318–321, 2005
19. Running-in effect on the load-carrying capacity of a water-lubricated SiC thrust bearing
    Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 219, no. 2, pp. 117–124, 2005
20. Friction Control of Active-Head Slider During Flying Height Adjustment
    Journal of Tribology, vol. 127, no. 4, p. 871, 2005
21. The effect of graded interface thickness on the life of Pb coating ion plated on SUS 17-4PH steel substrate
    Wear, vol. 256, no. 11-12, pp. 1182–1189, 2004
22. The Critical Condition for the Transition from HL to ML in Water-Lubricated SiC
    Tribology Letters, vol. 16, no. 4, pp. 253–258, 2004
23. Wear mode control of drive tip of ultrasonic motor for precision positioning
    Wear, vol. 256, no. 1-2, pp. 145–152, 2004
24. Wear-mode mapping for the micro-scale abrasion test
    Wear, vol. 255, no. 1-6, pp. 23–29, 2003
25. Friction, wear and N2-lubrication of carbon nitride coatings: a review
    Wear, vol. 254, no. 11, pp. 1062–1069, 2003
26. Tribology Letters, vol. 15, no. 2, pp. 91–96, 2003
27. Tribology Letters, vol. 15, no. 3, pp. 319–325, 2003
28. Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water
    Tribology International, vol. 36, no. 3, pp. 189–197, 2003
29. The comparisons of sliding speed and normal load effect on friction coefficients of self-mated Si3N4 and SiC under water lubrication
    Tribology International, vol. 35, no. 3, pp. 129–135, 2002
30. Wear of advanced ceramics
    Wear, vol. 253, no. 11-12, pp. 1097–1104, 2002
31. Friction and wear of self-mated SiC and Si3N4 sliding in water
    Wear, vol. 250, no. 1-12, pp. 246–255, 2001
32. Tribology Letters, vol. 11, no. 1, pp. 23–28, 2001
33. The effect of laser texturing of SiC surface on the critical load for the transition of water lubrication mode from hydrodynamic to mixed
    Tribology International, vol. 34, no. 10, pp. 703–711, 2001
34. Formation of smooth wear surfaces on alumina ceramics by embedding and tribo-sintering of fine wear particles
    Wear, vol. 245, no. 1-2, pp. 84–91, 2000
35. Wear map of ceramics
    Wear, vol. 203-204, pp. 291–301, 1997
36. The micro-mechanism of friction drive with ultrasonic wave
    Wear, vol. 194, no. 1-2, pp. 137–142, 1996
37. The wear mechanism of silicon nitride in rolling-sliding contact
    Wear, vol. 151, no. 2, pp. 291–300, 1991