Articles in Scholarly Journals [Incomplete List]

1. Stress intensity factors for through-thickness cracks in a wide plate: Derivation and application to arbitrary weld residual stress fields
   Engineering Fracture Mechanics, vol. 74, no. 13, pp. 2030–2054, 2007
2. Use of neutron and synchrotron X-ray diffraction for evaluation of residual stresses in a 2024-T351 aluminum alloy variable-polarity plasma-arc weld
   Metallurgical and Materials Transactions A, vol. 37, no. 2, pp. 411–420, 2006
3. Measurement of the residual stress field in MIG-welded Al-2024 and Al-7150 aluminium alloy compact tension specimens
   Materials Science and Engineering: A, 2006
4. In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction
   Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 246, no. 1, pp. 217–225, 2006
5. Direct measurement of the residual stresses near a ?boat-shaped? repair in a 20mm thick stainless steel tube butt weld
   International Journal of Pressure Vessels and Piping, vol. 82, no. 4, pp. 288–298, 2005
6. Analysis of the Residual Stress around a Cold-expanded Fastener Hole in a Finite Plate
   Strain, vol. 41, no. 2, pp. 59–70, 2005
7. Elastic strains around cracked cold-expanded fastener holes measured using the synchrotron X-ray diffraction technique
   The Journal of Strain Analysis for Engineering Design, vol. 39, no. 5, pp. 459–469, 2004
8. Residual Stress Measurement and Fatigue Crack Growth Prediction after Cold Expansion of Cracked Fastener Holes
   Journal of Aerospace Engineering, vol. 17, no. 3, p. 91, 2004
9. The onset of tensile residual stresses in grinding of hardened steels
   Materials Science and Engineering A, vol. 367, no. 1-2, pp. 132–142, 2004
10. Elastoplastic deformation of Al/SiCp metal–matrix composite studied by self-consistent modelling and neutron diffraction
    Acta Materialia, vol. 52, no. 6, pp. 1565–1577, 2004
11. Neutron diffraction measurement of the internal stresses following heat treatment of a plastically deformed Al/SiC particulate metal?matrix composite
    Acta Materialia, vol. 52, no. 13, pp. 3881–3888, 2004
12. Cross-sectional mapping of residual stresses in a VPPA weld using the contour method
    Acta Materialia, vol. 52, no. 17, pp. 5225–5232, 2004
13. Stress intensity factor correction for asymmetric through-thickness fatigue cracks at holes
    International Journal of Fatigue, vol. 25, no. 7, pp. 569–576, 2003
14. In situ determination of stresses from time-of-flight neutron transmission spectra
    Journal of Applied Crystallography, vol. 36, no. 5, pp. 1159–1168, 2003
15. The effect of high compressive loading on residual stresses and fatigue crack growth at cold expanded holes
    The Journal of Strain Analysis for Engineering Design, vol. 38, no. 5, pp. 419–427, 2003
16. Effect of Near-Surface Residual Stress and Microstructure Modification From Machining on the Fatigue Endurance of a Tool Steel
    Journal of Materials Engineering and Performance, vol. 11, no. 6, pp. 631–639, 2002
17. Mapping of unstressed lattice parameters using pulsed neutron transmission diffraction
    Journal of Applied Crystallography, vol. 35, no. 4, pp. 497–504, 2002
18. Influence of heat treatment processes on fatigue performance of particle reinforced aluminium alloys
    Materials Science and Technology, vol. 18, no. 12, pp. 1453–1457, 2002
19. Strain imaging by Bragg edge neutron transmission
    Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 481, no. 1-3, pp. 765–768, 2002
20. Changes in the misfit stresses in an Al/SiCp metal matrix composite under plastic strain
    Acta Materialia, vol. 50, no. 5, pp. 1031–1040, 2002
21. FE analysis of stresses and stress intensity factors of interfacial cracks in a CTS specimen
    Engineering Fracture Mechanics, vol. 69, no. 1, pp. 85–90, 2002
22. Bragg Edge Determination for Accurate Lattice Parameter and Elastic Strain Measurement
    physica status solidi (a), vol. 185, no. 2, pp. 221–230, 2001
23. Errors in crack closure measurements caused by flexure test fixture support effects
    Experimental Mechanics, vol. 41, no. 1, pp. 47–51, 2001
24. Effects of Surface Preparation on Pitting Resistance, Residual Stress, and Stress Corrosion Cracking in Austenitic Stainless Steels
    Journal of Materials Engineering and Performance, vol. 10, no. 5, pp. 507–514, 2001
25. Separation of measured fatigue crack stress fields in a metal matrix composite material
    Acta Materialia, vol. 47, no. 2, pp. 585–593, 1999
26. Fatigue Crack/Residual Stress Field Interactions and Their Implications for Damage-Tolerant Design
    Journal of Materials Engineering and Performance, vol. 7, no. 2, pp. 190–198, 1998
27. Separation of macroscopic, elastic mismatch and thermal expansion misfit stresses in metal matrix composite quenched plates from neutron diffraction measurements
    Acta Materialia, vol. 45, no. 12, pp. 4867–4876, 1997
28. Is fatigue surface roughness a sufficient condition for the generation of crack closure?
    Scripta Materialia, vol. 35, no. 11, pp. 1335–1340, 1996
29. Measurements of Stress Intensity Factors of an Interface Crack Under Mixed Mode Loading
    The Journal of Adhesion, vol. 56, no. 1, pp. 187–203, 1996
30. Effect of thermal residual stresses on fatigue crack opening and propagation behavior in an Al/SiC p metal matrix composite
    Metallurgical and Materials Transactions A, vol. 26, no. 12, pp. 3191–3198, 1995
31. The determination of the profile of macrostress and thermal mismatch stress through an Al/SiCp composite plate from the average residual strains measured in each phase
    Physica B: Condensed Matter, vol. 213-214, pp. 790–792, 1995