Claude Bathias

Personal Home Page

http://www.bathias.com/CVenglish.htm

Articles in Scholarly Journals [Incomplete List]

  1. Fatigue crack growth from small to large cracks on very high cycle fatigue with fish-eye failures
    Engineering Fracture Mechanics, vol. 75, no. 6, pp. 1657–1665, 2008
  2. Development of a new device to perform torsional ultrasonic fatigue testing
    International Journal of Fatigue, vol. 29, no. 9-11, pp. 2094–2101, 2007
  3. Fatigue crack growth from small to long cracks in VHCF with surface initiations
    International Journal of Fatigue, vol. 29, no. 9-11, pp. 2072–2078, 2007
  4. An engineering point of view about fatigue of polymer matrix composite materials
    International Journal of Fatigue, vol. 28, no. 10, pp. 1094–1099, 2006
  5. Piezoelectric fatigue testing machines and devices
    International Journal of Fatigue, vol. 28, no. 11, pp. 1438–1445, 2006
  6. Failure mechanisms of automotive metallic alloys in very high cycle fatigue range
    International Journal of Fatigue, vol. 28, no. 11, pp. 1590–1602, 2006
  7. On the giga cycle fatigue behaviour of two-phase (?2+?) TiAl alloy
    International Journal of Fatigue, vol. 26, no. 12, pp. 1263–1275, 2004
  8. Ultrasonic fatigue tests on bearing steel AISI-SAE 52100 at frequency of 20 and 30 kHz
    International Journal of Fatigue, vol. 25, no. 9-11, pp. 1037–1046, 2003
  9. An understanding of very high cycle fatigue of metals
    International Journal of Fatigue, vol. 25, no. 9-11, pp. 1101–1107, 2003
  10. Gigacycle fatigue of ferrous alloys
    Fatigue & Fracture of Engineering Materials & Structures, vol. 22, no. 8, pp. 667–672, 1999
  11. There is no infinite fatigue life in metallic materials
    Fatigue Fracture of Engineering Materials and Structures, vol. 22, no. 7, pp. 559–565, 1999
  12. Technical note High-cycle fatigue crack initiation and propagation behaviour of high-strength sprin steel wires
    Fatigue & Fracture of Engineering Materials & Structures, vol. 22, no. 8, pp. 673–677, 1999
  13. Influence of mean stress on ti6a14v fatigue crack growth at very high frequency
    Engineering Fracture Mechanics, vol. 56, no. 2, pp. 255–264, 1997
  14. RETROSPECTIVE VIEW ON THE ROLE OF THE PLASTIC ZONE AT A FATIGUE CRACK TIP
    Fatigue & Fracture of Engineering Materials and Structures, vol. 19, no. 11, pp. 1301–1306, 1996
  15. Accelerated vibratory fatigue test by ultrasonic frequency at cryogenic temperature
    Engineering Fracture Mechanics, vol. 54, no. 6, pp. 891–895, 1996
  16. STRENGTH PREDICTION AND DAMAGE MECHANISMS OF GLASS/EPOXY WOVEN LAMINATES WITH CIRCULAR HOLES
    Fatigue & Fracture of Engineering Materials and Structures, vol. 17, no. 4, pp. 411–428, 1994
  17. Fatigue behaviour of unnotched and notched woven glass/epoxy laminates
    Composites Science and Technology, vol. 50, no. 2, pp. 141–148, 1994
  18. Damage and fracture of notched non-woven and woven composite laminates
    Composites Science and Technology, vol. 52, no. 1, pp. 99–108, 1994
  19. Application of fracture mechanics concepts in ultrasonic fatigue
    Engineering Fracture Mechanics, vol. 47, no. 5, pp. 683–690, 1994
  20. Defects in squeeze-cast Al2O3/Al alloy composites and their effects on mechanical properties
    Composites Science and Technology, vol. 46, no. 3, pp. 245–252, 1993
  21. FATIGUE BEHAVIOUR OF Al2O3 SHORT FIBRE REINFORCED ALUMINIUM ALLOY
    Fatigue & Fracture of Engineering Materials and Structures, vol. 15, no. 11, pp. 1113–1123, 1992
  22. Fracture and fatigue of high performance composite materials: mechanisms and prediction
    Engineering Fracture Mechanics, vol. 40, no. 4-5, pp. 757–783, 1991
  23. A COMPARISON OF NEAR-THRESHOLD FATIGUE CRACK PROPAGATION IN TWO HIGH STRENGTH STEELS
    Fatigue & Fracture of Engineering Materials and Structures, vol. 13, no. 6, pp. 585–596, 1990
  24. Ductile crack growth of surface cracks in thin welded joints of an aluminium alloy 7020 T 6
    Engineering Fracture Mechanics, vol. 26, no. 1, pp. 33–43, 1987
  25. On the creep crack growth prediction by a local approach
    Engineering Fracture Mechanics, vol. 25, no. 5-6, pp. 677–691, 1986
  26. Study of fatigue crack initiation in the vicinity of notches
    Engineering Fracture Mechanics, vol. 16, no. 5, pp. 695–706, 1982
  27. Study of crack tip opening under cyclic loading taking into account the environment and R ratio
    Engineering Fracture Mechanics, vol. 12, no. 4, pp. 599–611, 1979
  28. Mechanisms of overload effect on fatigue crack propagation in aluminium alloys
    Engineering Fracture Mechanics, vol. 10, no. 2, pp. 409–424, 1978
  29. Application of fracture mechanics to aluminum alloys selection
    Engineering Fracture Mechanics, vol. 10, no. 2, pp. 267–282, 1978
  30. On the relationship between the parameters of Paris' law for fatigue crack growth in aluminium alloys
    Scripta Metallurgica, vol. 11, no. 12, pp. 1101–1106, 1977
  31. Fatigue crack propagation in martensitic and austenitic steels
    Metallurgical Transactions, vol. 4, no. 5, pp. 1265–1273, 1973