Jerzy A. Szpunar

Personal Home Page

http://people.mcgill.ca/jerzy.szpunar/

Articles in Scholarly Journals [Incomplete List]

  1. Texture simulation of aluminum rod during equal channel angular pressing
    Journal of Materials Science, vol. 43, no. 13, pp. 4561–4566, 2008
  2. The effect of electrochemical adsorbates on texture and morphology development during zinc and zinc–cobalt electrodepositions
    Electrochimica Acta, vol. 53, no. 14, pp. 4674–4678, 2008
  3. Electrochemical formation of highly pitting resistant passive films on a biomedical grade 316LVM stainless steel surface
    Materials Science and Engineering: C, vol. 28, no. 1, pp. 94–106, 2008
  4. Controlling palladium nanowire size through electroless deposition process
    Micro & Nano Letters, vol. 3, no. 2, p. 50, 2008
  5. Relationship between microstrain and lattice parameter change in nanocrystalline materials
    Philosophical Magazine Letters, vol. 88, no. 3, pp. 169–179, 2008
  6. Computer Model of Recrystallization Texture in Aluminum Alloys
    Materials and Manufacturing Processes, vol. 22, no. 7, pp. 928–933, 2007
  7. Cellular and molecular interactions between MC3T3-E1 pre-osteoblasts and nanostructured titanium produced by high-pressure torsion
    Biomaterials, vol. 28, no. 27, pp. 3887–3895, 2007
  8. Nanostructuring of a Titanium Material by High-Pressure Torsion Improves Pre-Osteoblast Attachment
    Advanced Materials, vol. 19, no. 8, pp. 1069–1073, 2007
  9. Tribo-electrochemical technique for studying tribocorrosion behavior of biomaterials
    Biomolecular Engineering, vol. 24, no. 5, pp. 443–446, 2007
  10. Determination of Active Slip/Twinning Modes in AZ31 Mg Alloy Near Room Temperature
    Journal of Materials Engineering and Performance, vol. 16, no. 3, pp. 321–326, 2007
  11. Tetragonal phase stability in ZrO2 film formed on zirconium alloys and its effects on corrosion resistance
    Acta Materialia, vol. 55, no. 5, pp. 1695–1701, 2007
  12. Effects of local stress on the stability of tetragonal phase in ZrO2 film
    Journal of Alloys and Compounds, vol. 437, no. 1-2, pp. 280–284, 2007
  13. Effect of the route and strain of equal-channel angular pressing on structure and properties of oxygen-free copper
    Materials Science and Engineering: A, vol. 462, no. 1-2, pp. 132–138, 2007
  14. The formation of martensite during wear of AISI 304 stainless steel
    Wear, vol. 263, no. 1-6, pp. 674–678, 2007
  15. AFM study of morphological development of zinc electrodeposits
    Surface Engineering, vol. 23, no. 4, pp. 300–306, 2007
  16. Cathodic Potential Oscillations of Sn(II) Reduction and Hydrogen Evolution in Acid Stannous Sulfate Solutions
    Journal of The Electrochemical Society, vol. 153, no. 3, p. E45, 2006
  17. Wear and corrosion wear of medium carbon steel and 304 stainless steel
    Wear, vol. 260, no. 1-2, pp. 116–122, 2006
  18. The effect of ?-fiber texture intensity of carbon steel substrate on zinc hetero-epitaxial growth
    Surface and Coatings Technology, vol. 201, no. 6, pp. 3116–3122, 2006
  19. Behavior of (111) grains during the thermal treatment of copper film studied in situ by electron back-scatter diffraction
    Microelectronic Engineering, vol. 83, no. 2, pp. 221–235, 2006
  20. Microstructure transformation of Pd membrane deposited on a porous Inconel substrate in hydrogen permeation at elevated temperature
    Journal of Membrane Science, vol. 284, no. 1-2, pp. 424–430, 2006
  21. Effects of tube fabrication variables on the oxidation of experimental Zr–2.5Nb tubes
    Journal of Nuclear Materials, vol. 353, no. 1-2, pp. 135–145, 2006
  22. An observation of palladium membrane formation on a porous stainless steel substrate by electroless deposition
    Journal of Membrane Science, 2006
  23. Texture evolution in Copper film at high temperature studied in situ by electron back-scatter diffraction
    Thin Solid Films, vol. 496, no. 2, pp. 703–717, 2006
  24. Isolation and Characterization of Sc2C2@C68: A Metal-Carbide Endofullerene with a Non-IPR Carbon Cage
    Angewandte Chemie, vol. 118, no. 13, pp. 2161–2165, 2006
  25. The significance of crystallographic texture of titanium alloy substrates on pre-osteoblast responses
    Biomaterials, 2006
  26. Synthesis of palladium nanostructures by spontaneous electroless deposition
    Chemical Physics Letters, vol. 422, no. 1-3, pp. 147–151, 2006
  27. Self-assembled palladium nanowires by electroless deposition
    Nanotechnology, vol. 17, no. 9, pp. 2161–2166, 2006
  28. Origin of lattice strain in nanocrystalline materials
    Philosophical Magazine Letters, vol. 85, no. 12, pp. 649–656, 2005
  29. “Bridge Model” of nanoparticles deposited on pores area of the substrate during a membrane fabrication
    Applied Physics Letters, vol. 87, no. 12, p. 121913, 2005
  30. The microstructural characteristics of ultrafine-grained nickel
    Materials Science and Engineering A, vol. 391, no. 1-2, pp. 377–389, 2005
  31. Impact of annealing, surface/strain energy and linewidth to line spacing ratio on texture evolution in damascene Cu interconnects
    Materials Characterization, vol. 54, no. 2, pp. 107–122, 2005
  32. The effect of wear and corrosion on internal crystalline texture of carbon steel and stainless steel
    Wear, vol. 259, no. 1-6, pp. 400–404, 2005
  33. Effect of surface preparation on zinc electrodeposited texture
    Surface and Coatings Technology, vol. 197, no. 2-3, pp. 229–237, 2005
  34. Nucleation and growth of tin on low carbon steel
    Electrochimica Acta, vol. 50, no. 12, pp. 2393–2399, 2005
  35. The effect of texture on the corrosion resistance of zinc electrodeposits
    Transactions of the Institute of Metal Finishing, vol. 83, no. 2, pp. 99–103, 2005
  36. Texture Development during Grain Growth in Nonoriented Electrical Steels
    ISIJ International, vol. 45, no. 5, pp. 743–749, 2005
  37. Stored Energy and Taylor Factor Relation in an Al-Mg-Mn Alloy Sheet Worked by Continuous Cyclic Bending
    MATERIALS TRANSACTIONS, vol. 45, no. 7, pp. 2316–2325, 2004
  38. Growth Rate and Phase Composition of Oxide Scales during Hot Rolling of Low Carbon Steel
    ISIJ International, vol. 44, no. 9, pp. 1554–1559, 2004
  39. A model of texture formation in ZrO2 films
    Materials Science and Engineering A, vol. 366, no. 1, pp. 164–174, 2004
  40. Analysis of zirconium oxide formed during oxidation at 623 K on Zr?2.5Nb and Zircaloy-4
    Materials Science and Engineering A, vol. 381, no. 1-2, pp. 104–112, 2004
  41. Modeling of hydrogen trapping in the deformed Pd and Pd77Ag23 alloy
    Materials Science and Engineering: A, vol. 379, no. 1-2, pp. 173–180, 2004
  42. High temperature behavior of Cu films studied in-situ by Electron Backscatter Diffraction
    Microelectronic Engineering, vol. 76, no. 1-4, pp. 160–166, 2004
  43. Analysis on volume fraction and crystal orientation relationship of monoclinic and tetragonal oxide grown on Zr?2.5Nb alloy
    Journal of Nuclear Materials, vol. 334, no. 2-3, pp. 200–206, 2004
  44. Texture and surface morphology in zinc electrodeposits
    Journal of Applied Electrochemistry, vol. 34, no. 12, pp. 1249–1258, 2004
  45. Impact of trench aspect ratio on microstructure variation in as-deposited and annealed damascene Cu interconnect lines
    Micron, vol. 35, no. 7, pp. 575–587, 2004
  46. Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion
    Acta Materialia, vol. 51, no. 3, pp. 753–765, 2003
  47. Evolution of recrystallization texture in nonoriented electrical steels
    Acta Materialia, vol. 51, no. 11, pp. 3037–3051, 2003
  48. An efficient synthesis of 3(S)-aminopiperidine-5(R)-carboxylic acid as a cyclic ß,?'-diamino acid
    Tetrahedron Letters, vol. 44, no. 8, pp. 1611–1614, 2003
  49. Interface Science, vol. 11, no. 4, pp. 439–450, 2003
  50. Effect of Heating Rate on the Development of Annealing Texture in Nonoriented Electrical Steels
    ISIJ International, vol. 43, no. 10, pp. 1611–1614, 2003
  51. Anisotropic flux density dependence of magnetic barkhausen noise in oriented 3% Si-Fe steel laminates
    IEEE Transactions on Magnetics, vol. 39, no. 1, pp. 562–566, 2003
  52. Journal of Materials Science, vol. 37, no. 7, pp. 1461–1471, 2002
  53. Influence of primary annealing condition on texture development in grain oriented electrical steels
    Acta Materialia, vol. 50, no. 7, pp. 1825–1834, 2002
  54. Improving the tribological behavior of copper through novel Ti–Cu intermetallic coatings
    Wear, vol. 253, no. 5-6, pp. 626–639, 2002
  55. Effect of aeration rate on the mycelial morphology and exo-biopolymer production in Cordyceps militaris
    Process Biochemistry, vol. 37, no. 11, pp. 1257–1262, 2002
  56. Effect of Mn negative segregation through the thickness direction on graphitization characteristics of strip-cast white cast iron
    Scripta Materialia, vol. 46, no. 3, pp. 199–203, 2002
  57. Orientation imaging microscopy of ultrafine-grained nickel
    Scripta Materialia, vol. 46, no. 8, pp. 575–580, 2002
  58. An analytical method for characterizing grain boundaries around growing goss grains during secondary recrystallization
    Scripta Materialia, vol. 44, no. 10, pp. 2387–2392, 2001
  59. Orientation imaging microscopy for the study on high temperature oxidation
    Scripta Materialia, vol. 44, no. 11, pp. 2605–2610, 2001
  60. Oxidation behaviour of titanium coated copper substrate
    Surface and Coatings Technology, vol. 139, no. 2-3, pp. 192–199, 2001
  61. FORMATION OF Ti–Cu INTERMETALLIC COATINGS ON COPPER SUBSTRATE
    Materials and Manufacturing Processes, vol. 16, no. 2, pp. 219–228, 2001
  62. Cube Texture Development in an Al-Mg-Mn Alloy Sheet Worked by Continuous Cyclic Bending.
    MATERIALS TRANSACTIONS, vol. 42, no. 10, pp. 2050–2058, 2001
  63. Journal of Materials Science, vol. 35, no. 8, pp. 1997–2003, 2000
  64. Journal of Materials Science, vol. 35, no. 2, pp. 331–335, 2000
  65. Monte-Carlo simulation of Goss texture development in silicon steel in the presence of MnS particles
    Materials Science and Engineering A, vol. 289, no. 1-2, pp. 99–108, 2000
  66. Journal of Materials Science: Materials in Electronics, vol. 11, no. 3, pp. 243–251, 2000
  67. A new model for recrystallization of heavily cold-rolled aluminum using orientation-dependent stored energy
    Acta Materialia, vol. 48, no. 13, pp. 3327–3340, 2000
  68. Importance of fractions of highly mobile boundaries in abnormal growth of Goss grains
    Materials Science and Engineering A, vol. 259, no. 1, pp. 8–16, 1999
  69. Grain boundary character distribution in oxides formed on (100) and (111) nickel single crystals coated with ceria gel
    Corrosion Science, vol. 41, no. 9, pp. 1703–1713, 1999
  70. Influence of stress developed due to oxide layer formation on the oxidation kinetics of Zr–2.5%Nb alloy
    Journal of Nuclear Materials, vol. 264, no. 3, pp. 327–332, 1999
  71. Controlling the surface texture of nickel for hightemperature oxidation inhibition
    Corrosion Science, vol. 41, no. 4, pp. 729–740, 1999
  72. A role of fractions of mobile grain boundaries in secondary recrystallization of Fe–Si steels
    Acta Materialia, vol. 47, no. 10, pp. 2999–3008, 1999
  73. Controlling the thermal stability of texture in single-phase electrodeposits
    Nanostructured Materials, vol. 11, no. 5, pp. 669–676, 1999
  74. Thermal instability of Ni electrodeposits applied in replication of optical recording devices
    Acta Materialia, vol. 47, no. 8, pp. 2553–2566, 1999
  75. Journal of Materials Science, vol. 34, no. 19, pp. 4727–4735, 1999
  76. Special grain boundaries in zirconia corrosion films
    Philosophical Magazine A, vol. 79, no. 7, pp. 1567–1590, 1999
  77. On the mechanism of the influence of crystallographic slip on grain-boundary sliding at similar deformation of grains
    Philosophical Magazine Letters, vol. 79, no. 8, pp. 545–549, 1999
  78. Modelling and Simulation in Materials Science and Engineering, vol. 5, no. 1, pp. 35–52, 1999
  79. Extinction and Grain-Size Anisotropy Correction of Texture Data Obtained Using Neutron Diffraction
    Journal of Applied Crystallography, vol. 31, no. 2, pp. 163–168, 1998
  80. Journal of Materials Science Letters, vol. 17, no. 22, pp. 1949–1952, 1998
  81. Journal of Materials Science, vol. 33, no. 22, pp. 5463–5472, 1998
  82. Textures of oxide films grown on nickel electrodeposits
    Scripta Materialia, vol. 39, no. 10, pp. 1359–1364, 1998
  83. On the Grain Boundary Character Distributions and Grain Boundary Network Topology (Grain Boundary Statistics in Materials Susceptible to Annealing Twinning, Revisited)
    Scripta Materialia, vol. 38, no. 9, pp. 1399–1404, 1998
  84. The texture–surface morphology relationship in zinc–iron electrolytic coatings
    Journal of Materials Science, vol. 33, no. 10, pp. 2589–2594, 1998
  85. Magnetism in nanostructured Ni–P and Co–W alloys
    Journal of Magnetism and Magnetic Materials, vol. 187, no. 3, pp. 325–336, 1998
  86. Atomic force microscopy imaging of the growth features on the surface of rutile
    Micron, vol. 29, no. 2-3, pp. 201–206, 1998
  87. The influence of crystallographic orientation of nickel surface on oxidation inhibition by ceria coatings
    Acta Materialia, vol. 46, no. 4, pp. 1403–1417, 1998
  88. The changes of grain boundary character distribution during the secondary recrystallization of electrical steel
    Acta Materialia, vol. 46, no. 3, pp. 1063–1073, 1998
  89. Sliding behaviour of symmetric tilt near ?=25? boundary in zinc bicrystals
    Materials Science and Engineering A, vol. 245, no. 1, pp. 49–54, 1998
  90. The role of texture and morphology in optimizing the corrosion resistance of zinc-based electrogalvanized coatings
    Corrosion Science, vol. 40, no. 4-5, pp. 525–545, 1998
  91. Computer modelling the diffusion of Ni in NiO at high temperatures
    Corrosion Science, vol. 39, no. 7, pp. 1211–1219, 1997
  92. The effect of reactive element on texture and grain boundary character distribution in nickel oxide
    Corrosion Science, vol. 39, no. 8, pp. 1459–1468, 1997
  93. A Monte Carlo simulation approach to the texture formation during electrodeposition—I. The simulation model
    Electrochimica Acta, vol. 42, no. 1, pp. 37–45, 1997
  94. A Monte Carlo simulation approach to the texture formation during electrodeposition—II. Simulation and experiment
    Electrochimica Acta, vol. 42, no. 1, pp. 47–60, 1997
  95. Neutron diffraction method for stored energy measurement in interstitial free steel
    Acta Materialia, vol. 45, no. 6, pp. 2485–2494, 1997
  96. A comprehensive model of recrystallization for interstitial free steel
    Acta Materialia, vol. 45, no. 9, pp. 3721–3730, 1997
  97. The role of grain boundary character distribution in secondary recrystallization of electrical steels
    Acta Materialia, vol. 45, no. 3, pp. 1285–1295, 1997
  98. Modeling of texture development during recrystallization of interstitial free steel
    Acta Materialia, vol. 45, no. 6, pp. 2425–2434, 1997
  99. The correlation between the surface roughness and growth mechanism in thin NiO films modified by CeO2
    Corrosion Science, vol. 39, no. 1, pp. 147–158, 1997
  100. A role of d-ferrite in edge-crack formation during hot-rolling of austenitic stainless steels
    Scripta Materialia, vol. 37, no. 8, pp. 1231–1235, 1997
  101. THE EVOLUTION OF TEXTURE AND GRAIN SIZE DURING ANNEALING OF NANOCRYSTALLINE Ni-45% Fe ELECTRODEPOSITS
    Scripta Materialia, vol. 37, no. 12, pp. 1967–1972, 1997
  102. A new model of Goss texture development during secondary recrystallization of electrical steel
    Acta Materialia, vol. 45, no. 11, pp. 4713–4720, 1997
  103. A method for the quantitative phase analysis of ZrO2 films grown on Zr-2.5% Nb pressure tubes
    Journal of Nuclear Materials, vol. 245, no. 2-3, pp. 147–151, 1997
  104. Monte-Carlo simulation of texture and microstructure development in nanocrystalline electrodeposits
    Nanostructured Materials, vol. 9, no. 1-8, pp. 673–676, 1997
  105. The determination of orientation-dependent stored energy using neutron diffraction
    Physica B: Condensed Matter, vol. 241-243, pp. 1225–1227, 1997
  106. The influence of texture on power losses in nonoriented electrical steels
    Journal of Applied Physics, vol. 81, no. 2, p. 821, 1997
  107. Statistical characterization of grain boundaries in nanocrystalline zirconia
    Nanostructured Materials, vol. 9, no. 1-8, pp. 343–346, 1997
  108. Journal of Materials Science, vol. 32, no. 20, pp. 5513–5523, 1997
  109. Applications of the embedded-atom method to glass formation and crystallization of liquid and glass transition-metal nickel
    Philosophical Magazine A, vol. 75, no. 4, pp. 1057–1066, 1997
  110. Atomic Force Microscopy Study of Surface Morphology of Zinc-Iron Electrodeposits
    Journal of The Electrochemical Society, vol. 144, no. 2, p. 481, 1997
  111. Magnetic Barkhausen noise study of domain wall dynamics in grain oriented 3% Si-Fe
    IEEE Transactions on Magnetics, vol. 32, no. 2, pp. 527–534, 1996
  112. Steady-Stage Growth of NiO Scales on Ceria-Coated Polycrystalline Nickel
    Journal of The Electrochemical Society, vol. 143, no. 9, p. 3000, 1996
  113. Magnetic texture determination using nonpolarized neutron diffraction
    Physical Review B, vol. 53, no. 10, pp. 6412–6417, 1996
  114. Method based on the saturation approach law for monitoring the quality of texture in 3% Si–Fe
    Journal of Applied Physics, vol. 79, no. 8, p. 5202, 1996
  115. Correlation of magnetic Barkhausen noise with core loss in oriented 3% Si–Fe steel laminates
    Journal of Applied Physics, vol. 79, no. 6, p. 3156, 1996
  116. Correlation between the Barkhausen noise power and the total power losses in 3% Si–Fe
    Journal of Applied Physics, vol. 79, no. 8, p. 6042, 1996
  117. Anisotropy of permeability at 10 Oe in textured soft magnetic materials
    Journal of Applied Physics, vol. 79, no. 11, p. 8588, 1996
  118. Anisotropy of power losses in textured soft magnetic materials
    Journal of Applied Physics, vol. 80, no. 12, p. 6915, 1996
  119. Optimizing properties of CeO2 sol-gel coatings for protection of metallic substrates against high temperature oxidation
    Thin Solid Films, vol. 289, no. 1-2, pp. 213–219, 1996
  120. The influence of texture on domain wall spacing in grain oriented materials
    Journal of Magnetism and Magnetic Materials, vol. 164, no. 3, pp. 300–304, 1996
  121. The growth and structure of thin oxide films on cerium ion-implanted nickel
    Metallurgical and Materials Transactions A, vol. 27, no. 11, pp. 3649–3661, 1996
  122. Near coincidence site lattice misorientations in monoclinic zirconia
    Scripta Materialia, vol. 35, no. 11, pp. 1247–1251, 1996
  123. Microstructural model of intergranular fracture during tensile tests
    Journal of Materials Processing Technology, vol. 60, no. 1-4, pp. 305–310, 1996
  124. The role of grain boundary character distribution in Goss texture development in electrical steels
    Journal of Magnetism and Magnetic Materials, vol. 160, pp. 143–144, 1996
  125. Molecular dynamics simulation on crystallization of amorphous Al
    Scripta Metallurgica et Materialia, vol. 32, no. 12, pp. 1957–1963, 1995
  126. Surface analysis of nickel-oxide films modified by a reactive element
    Oxidation of Metals, vol. 43, no. 1-2, pp. 25–57, 1995
  127. The application of the etch-pit method to quantitative texture analysis
    Journal of Materials Science, vol. 30, no. 5, pp. 1327–1332, 1995
  128. Molecular dynamics simulation of the melting of a twist ?=5 grain boundary
    Interface Science, vol. 3, no. 2, 1995
  129. A possible role for surface packing density in the formation of {111} texture in solidified FCC metals
    Journal of Materials Science Letters, vol. 13, no. 21, pp. 1521–1523, 1994
  130. The texture formation in Al-7% Si ingots
    Journal of Materials Science Letters, vol. 13, no. 6, pp. 453–456, 1994
  131. The influence of the textural development on magnetic properties in Co-Cr thin films
    Journal of Magnetism and Magnetic Materials, vol. 131, no. 3, pp. 427–439, 1994
  132. The role of s5 coincidence boundaries in the growth selection of Fe—3% Si
    Journal of Materials Processing Technology, vol. 47, no. 1-2, pp. 167–184, 1994
  133. The development of texture in Co-Cr films
    IEEE Transactions on Magnetics, vol. 30, no. 4, pp. 1373–1379, 1994
  134. Texture influence on the frequency of occurrence of CSL-boundaries in polycrystalline materials
    Acta Metallurgica et Materialia, vol. 41, no. 10, pp. 2825–2832, 1993
  135. Molecular-dynamics simulation of rapid solidification of aluminum
    Acta Metallurgica et Materialia, vol. 41, no. 8, pp. 2291–2295, 1993
  136. A texture formation mechanism during electrodeposition
    Journal of Materials Science, vol. 28, no. 20, pp. 5554–5559, 1993
  137. Method of measurement and analysis of texture in thin films
    Journal of Materials Science, vol. 28, no. 9, pp. 2366–2376, 1993
  138. A Monte-Carlo simulation of the electrodeposition process
    Journal of Electronic Materials, vol. 22, no. 6, pp. 653–657, 1993
  139. The texture of electrodeposited iron foils
    Journal of Electronic Materials, vol. 22, no. 6, pp. 645–651, 1993
  140. The correlation of texture and magnetic properties in Co-Cr films
    Journal of Electronic Materials, vol. 22, no. 6, pp. 617–622, 1993
  141. Development of methods for on-line texture analysis
    Journal of Nondestructive Evaluation, vol. 12, no. 1, pp. 21–26, 1993
  142. The slip system in ordered TiNi alloy
    Journal of Materials Science Letters, vol. 11, no. 8, pp. 510–511, 1992
  143. Determination of single crystals' elastic constants from the measurement of ultrasonic velocity in the polycrystalline material
    Acta Metallurgica et Materialia, vol. 40, no. 12, pp. 3277–3283, 1992
  144. Modelling of recrystallization textures
    Acta Metallurgica et Materialia, vol. 39, no. 4, pp. 549–556, 1991
  145. A Monte-Carlo simulation applied to the modelling of nucleation of texture
    Acta Metallurgica et Materialia, vol. 39, no. 4, pp. 557–567, 1991
  146. Development of texture in low-carbon steels for cold heading
    Journal of Materials Processing Technology, vol. 26, no. 3, pp. 305–321, 1991
  147. The effect of textural through-thickness inhomogeneity on the prediction of the anisotropy of magnetocrystalline energy in silicon steels
    IEEE Transactions on Magnetics, vol. 27, no. 2, pp. 742–749, 1991
  148. Determination of the orientation distribution function from arbitrary pole figure regions
    Journal of Materials Science, vol. 25, no. 6, pp. 2846–2850, 1990
  149. Ultrasonic velocities in textured metals
    Journal of Materials Science, vol. 24, no. 1, pp. 45–52, 1989
  150. Magnetic and metallurgical properties of high-tensile steels
    Journal of Materials Science, vol. 23, no. 12, pp. 4534–4540, 1988
  151. A new approach to Preisach diagrams
    IEEE Transactions on Magnetics, vol. 23, no. 3, pp. 1856–1865, 1987
  152. High-voltage Lorentz electron microscopy studies of domain structures and magnetization processes in pearlitic steels
    Philosophical Magazine Part B, vol. 56, no. 5, pp. 561–577, 1987
  153. Magnetic domains in construction steel
    IEEE Transactions on Magnetics, vol. 21, no. 6, pp. 2613–2619, 1985
  154. Influence of stresses on the hysteresis curve in constructional steel
    IEEE Transactions on Magnetics, vol. 20, no. 5, pp. 1882–1884, 1984
  155. A model for the calculation of the magnetization in textured polycrystalline materials with high cubic crystalline anisotropy
    IEEE Transactions on Magnetics, vol. 20, no. 5, pp. 1490–1492, 1984
  156. Influence of crystal orientation distribution on anisotropy of magnetostriction and magnetocrystalline energy in Fe-Si steel
    Journal of Applied Physics, vol. 55, no. 6, p. 2133, 1984
  157. Thermodynamic potential model for magnetization of textured polycrystalline materials
    Journal of Applied Physics, vol. 55, no. 6, p. 2148, 1984
  158. Grain shape and distribution of the grain-boundary density in polycrystalline materials
    Journal of Materials Science, vol. 19, no. 10, pp. 3249–3254, 1984
  159. Studies of the bioavailability of nitroglycerin from a transdermal therapeutic system (Nitroderm TTS)
    European Journal of Clinical Pharmacology, vol. 27, no. 1, pp. 7–12, 1984
  160. Kinetics of sub-grain coalescence—A reconsideration of the theory
    Acta Metallurgica, vol. 32, no. 10, pp. 1789–1798, 1984
  161. Magnetic properties in textured fine-particles magnets
    Journal of Magnetism and Magnetic Materials, vol. 43, no. 3, pp. 317–326, 1984