Vladimir Hlavacek

Personal Home Page

http://www.cbe.buffalo.edu/hlavacek.htm

Articles in Scholarly Journals [Incomplete List]

  1. Industrial & Engineering Chemistry Research, vol. 45, no. 17, pp. 5826–5835, 2006
  2. THERMODYNAMIC SIMULATION OF HALOGEN-SiO 2 -CaO-FeO SYSTEM AND ITS APPLICATION TO THERMAL LANCE CONCRETE CUTTING
    Chemical Engineering Communications, vol. 193, no. 1, pp. 116–128, 2006
  3. Industrial & Engineering Chemistry Research, vol. 44, no. 8, pp. 2477–2483, 2005
  4. Industrial & Engineering Chemistry Research, vol. 44, no. 8, pp. 2469–2476, 2005
  5. Industrial & Engineering Chemistry Research, vol. 44, no. 19, pp. 7352–7358, 2005
  6. Industrial & Engineering Chemistry Research, vol. 44, no. 19, pp. 7359–7365, 2005
  7. Reactivity, Stored Energy, and Dislocations in Solid-Solid Reacting Systems
    Chemical Engineering Communications, vol. 192, no. 7, pp. 933–940, 2005
  8. The eutectic generation effect and chemical modification of thermal lance cutting of concrete
    Journal of Materials Science, vol. 39, no. 23, pp. 7003–7008, 2004
  9. Recovery of fly ash carbon by carbochlorination via phosgene route
    Powder Technology, vol. 131, no. 2-3, pp. 206–211, 2003
  10. Combustion of fly-ash carbon Part II: Thermodynamic aspects and calorimetric experiment
    Fuel Processing Technology, vol. 72, no. 3, pp. 227–233, 2001
  11. Chemical vapor deposition and morphology problems
    Thin Solid Films, vol. 365, no. 2, pp. 275–293, 2000
  12. Purification of enriched fly ash carbon by chlorination of fly ash in a fluidized bed reactor
    Fuel Processing Technology, vol. 67, no. 2, pp. 103–114, 2000
  13. Particle Size and Reactivity of Aluminum Powders
    Combustion Science and Technology, vol. 156, no. 1, pp. 81–96, 2000
  14. Effective extraction of titanium from rutile by a low-temperature chloride process
    AIChE Journal, vol. 46, no. 2, pp. 355–360, 2000
  15. Recycling titanium from Ti-waste by a low-temperature extraction process
    AIChE Journal, vol. 46, no. 12, pp. 2499–2503, 2000
  16. Carbochlorination of tantalum and niobium oxides: Thermodynamic simulation and kinetic modeling
    AIChE Journal, vol. 45, no. 3, pp. 581–589, 1999
  17. Combustion of fly-ash carbon Part I. TG/DTA study of ignition temperature
    Fuel Processing Technology, vol. 61, no. 3, pp. 211–221, 1999
  18. Solid?solid reaction with mechanical coupling
    Chemical Engineering Science, vol. 54, no. 13-14, pp. 2985–2990, 1999
  19. Kinetic study of chlorination of niobium (V) oxide with chlorine and carbon monoxide
    Powder Technology, vol. 102, no. 2, pp. 177–183, 1999
  20. Improvement of PVC wearability by addition of additives
    Powder Technology, vol. 103, no. 2, pp. 182–188, 1999
  21. Recycling of carbon-enriched coal fly ash
    Powder Technology, vol. 104, no. 2, pp. 190–195, 1999
  22. Carbochlorination kinetics of titanium dioxide with carbon and carbon monoxide as reductant
    Metallurgical and Materials Transactions B, vol. 29, no. 6, pp. 1297–1307, 1998
  23. Deflagration and detonation in solid-solid combustion
    AIChE Journal, vol. 43, no. 11, pp. 3085–3094, 1997
  24. Numerical Solution of Free-Boundary Problems: Calculation of Interface Evolution during CVD Growth
    Journal of Computational Physics, vol. 125, no. 1, pp. 262–276, 1996
  25. DENSIFICATION OF ALUMINUM NITRIDE-BASED CERAMIC MATERIALS SYNTHESIZED BY COMBUSTION OF ALUMINUM IN AIR
    Chemical Engineering Communications, vol. 152, no. 1, pp. 75–85, 1996
  26. PATTERN FORMATION IN SOLID FILM GROWTH DURING CVD
    Chemical Engineering Communications, vol. 152, no. 1, pp. 189–209, 1996
  27. Role of Stress in Reaction Engineering Catalytic and Noncatalytic Reactions
    Industrial & Engineering Chemistry Research, vol. 34, no. 10, pp. 3417–3425, 1995
  28. Direct Synthesis and Sintering of Silicon Nitridenitanium Nitride Composite
    Journal of the American Ceramic Society, vol. 78, no. 2, pp. 495–496, 1995
  29. Noncatalytic gas-solid reactions and mechanical stress generation
    AIChE Journal, vol. 41, no. 5, pp. 1235–1250, 1995
  30. Analysis of interface evolution and pattern formation during CVD
    AIChE Journal, vol. 41, no. 8, pp. 1926–1943, 1995
  31. Reaction rate modeling in noncatalytic gas-solid systems: Species transport and mechanical stress
    AIChE Journal, vol. 41, no. 12, pp. 2614–2624, 1995
  32. A d.c. plasma-fluidized bed reactor for the production of calcium carbide
    Journal of Materials Science, vol. 30, no. 9, pp. 2412–2419, 1995
  33. Simulation of the growth of CVD films
    Chemical Engineering Science, vol. 50, no. 21, pp. 3493–3497, 1995
  34. Particle-aided chemical vapor deposition (PACVD) of silicon carbide composites
    Chemical Engineering Science, vol. 49, no. 24, pp. 4917–4938, 1994
  35. Fluidization of micron-size ceramic powders in a small-diameter fluidized bed
    Powder Technology, vol. 79, no. 3, pp. 227–235, 1994
  36. Controlling the morphology of CVD films
    AIChE Journal, vol. 40, no. 6, pp. 1032–1045, 1994
  37. Synthesis of ultra-fine SiC powders in a d.c. plasma reactor
    Journal of Materials Science, vol. 28, no. 3, pp. 659–668, 1993
  38. Thermochemical stress development in ceramic catalyst supports
    Chemical Engineering Science, vol. 48, no. 11, pp. 1925–1932, 1993
  39. AN EXPLICIT 3D FINITE-VOLUME METHOD FOR SIMULATION OF REACTIVE FLOWS USING A HYBRID MOVING ADAPTIVE GRID
    Numerical Heat Transfer, Part B: Fundamentals, vol. 24, no. 1, pp. 1–29, 1993
  40. Combustion of Metallic Powders: A Phenomenological Model for the Initiation of Combustion
    Combustion Science and Technology, vol. 88, no. 3, pp. 153–175, 1993
  41. Direct Synthesis of Composites and Solid Solutions by Combustion Reactions
    Combustion Science and Technology, vol. 88, no. 3, pp. 187–199, 1993
  42. A chemical vapor deposition method for the manufacture of silicon carbide tubes
    Journal of Alloys and Compounds, vol. 184, no. 2, pp. 219–233, 1992
  43. Modeling of a–Si:H deposition in a dc glow discharge reactor
    Journal of Materials Research, vol. 7, no. 8, Article ID 1992.2160, 21 pages, 1992
  44. Design and development of the d.c. plasma reactor for the synthesis of ultrafine powders
    Journal of Materials Science, vol. 27, no. 8, pp. 2211–2217, 1992
  45. Temperature oscillations and vibrations of AC resistively heated thin filaments
    AIChE Journal, vol. 38, no. 2, pp. 284–290, 1992
  46. Comparison of different ionization models for a glow discharge
    AIChE Journal, vol. 38, no. 11, pp. 1835–1839, 1992
  47. Effect of radiation on the combustion rate in a condensed phase
    AIChE Journal, vol. 37, no. 10, pp. 1595–1597, 1991
  48. Coating of fibrous substrates by CVD; analysis of the fiber evolution
    Journal of Crystal Growth, vol. 108, no. 1-2, pp. 190–202, 1991
  49. HIGH PERFORMANCE CERAMIC FIBERS BY CVD TECHNOLOGY
    Materials and Manufacturing Processes, vol. 6, no. 3, pp. 397–422, 1991
  50. CVD Reactors for the Coating of Fibrous Substrates Modeling and Numerical Simulation
    Journal of The Electrochemical Society, vol. 137, no. 11, p. 3459, 1990
  51. Preparation of tungsten and tungsten carbide submicron powders in a chlorine-hydrogen flame by the chemical vapor phase reaction
    Journal of the Less Common Metals, vol. 163, no. 2, pp. 269–280, 1990
  52. Modeling and analysis of filtration combustion for synthesis of transition metal nitrides
    Chemical Engineering Science, vol. 45, no. 8, pp. 2499–2504, 1990
  53. CVD reactors for the synthesis of inorganic fibers. Modeling and experimental evaluation
    Chemical Engineering Science, vol. 45, no. 8, pp. 2543–2550, 1990
  54. Bifurcation analysis of chemically driven convection
    Chemical Engineering Science, vol. 45, no. 2, pp. 503–517, 1990
  55. Two-dimensional numerical study of cross-flow filtration combustion
    AIChE Journal, vol. 36, no. 11, pp. 1649–1660, 1990
  56. Laser-induced ignition in solid-state combustion
    AIChE Journal, vol. 35, no. 7, pp. 1085–1096, 1989
  57. Interaction between chemical reaction and natural convection in porous media
    Chemical Engineering Science, vol. 44, no. 9, pp. 1853–1870, 1989
  58. Influence of secondary flows on the stability of chemically reacting systems
    AIChE Journal, vol. 34, no. 2, pp. 209–222, 1988
  59. Reaction front propagation in nonadiabatic exothermic reaction flow systems
    AIChE Journal, vol. 33, no. 5, pp. 819–833, 1987
  60. Chemically driven convection in a porous medium
    AIChE Journal, vol. 33, no. 8, pp. 1344–1350, 1987
  61. Role of continuation in engineering analysis
    Chemical Engineering Science, vol. 42, no. 6, pp. 1281–1295, 1987
  62. Strategy of calculation of periodic solutions
    Chemical Engineering Science, vol. 42, no. 12, pp. 2927–2933, 1987
  63. Stability analysis of chemical reaction and free convection in porous media
    International Communications in Heat and Mass Transfer, vol. 14, no. 4, pp. 391–403, 1987
  64. Use of 2-D-adaptive mesh in simulation of combustion front phenomena
    Computers & Chemical Engineering, vol. 11, no. 6, pp. 749–755, 1987
  65. Chaotic behaviour of a diffusion-reaction system
    Chemical Engineering Science, vol. 41, no. 11, pp. 2747–2760, 1986
  66. On the detailed dynamics of coupled continuous stirred tank reactors
    Chemical Engineering Science, vol. 41, no. 11, pp. 2767–2777, 1986
  67. Propagation of reaction fronts in exothermic heterogeneous noncatalytic systems solid-solid and solid-gas
    Chemical Engineering Science, vol. 41, no. 4, pp. 877–882, 1986
  68. A Stefan problem for exothermic non-catalytic reactions
    International Journal of Heat and Mass Transfer, vol. 28, no. 6, pp. 1237–1239, 1985
  69. Simulation of countercurrent separation processes via global approach
    Computers & Chemical Engineering, vol. 9, no. 4, pp. 343–350, 1985
  70. A Direct Method for the Computation of Hopf Bifurcation Points
    SIAM Journal on Applied Mathematics, vol. 45, no. 6, p. 879, 1985
  71. EXPERIENCE WITH ADOPTING ONE-PARAMETER IMBEDDING METHODS TOWARD CALCULATION OF COUNTERCURRENT SEPARATION PROCESSES
    Chemical Engineering Communications, vol. 28, no. 1, pp. 165–179, 1984
  72. On the dynamics of parabolic equations describing diffusion, convection and a chemical reaction
    Physica D: Nonlinear Phenomena, vol. 10, no. 3, pp. 413–417, 1984
  73. Analysis of global approaches to the simulation of counter-current separators
    Computers & Chemical Engineering, vol. 8, no. 5, pp. 267–274, 1984
  74. Direct evaluation of critical conditions for thermal explosion and catalytic reaction
    Combustion and Flame, vol. 55, no. 3, pp. 323–329, 1984
  75. Complex oscillations over an isothermal catalyst pellet
    Chemical Engineering Science, vol. 39, no. 10, pp. 1511–1516, 1984
  76. Experimental study of ignition and extinction waves and oscillatory behavior of a tubular nonadiabatic fixed bed reactor for the oxidation of carbon monoxide
    Chemical Engineering Science, vol. 39, no. 4, pp. 681–692, 1984
  77. INTEGRATION OF DIFFICULT INITIAL AND BOUNDARY VALUE PROBLEMS BY ARC-LENGTH STRATEGY
    Chemical Engineering Communications, vol. 22, no. 5, pp. 287–297, 1983
  78. Numerical Computation of Hopf Bifurcation Points for Parabolic Diffusion-Reaction Differential Equations
    SIAM Journal on Applied Mathematics, vol. 43, no. 5, p. 1075, 1983
  79. CALCULATION OF HOLLOW BOX REACTORS
    Chemical Engineering Communications, vol. 17, no. 1, pp. 1–12, 1982
  80. DEACTIVATION OF PLATINUM CATALYSTS BY POISONS: A STUDY OF BEHAVIOR OF AFTERBURNER CONVERTORS
    Chemical Engineering Communications, vol. 18, no. 1, pp. 1–14, 1982
  81. Oscillatory behavior of metallic honeycomb catalysts
    Chemical Engineering Science, vol. 37, no. 3, pp. 375–380, 1982
  82. Current problems of multiplicity, stability and sensitivity of states in chemically reacting systems
    Chemical Engineering Science, vol. 36, no. 10, pp. 1587–1597, 1981
  83. Global simulation of countercurrent separation processes via one-parameter imbedding techniques
    Chemical Engineering Science, vol. 36, no. 10, pp. 1599–1604, 1981
  84. A Revision of multiplicity and parametric sensitivity concepts in nonisothermal nonadiabatic packed bed chemical reactors
    Chemical Engineering Science, vol. 36, no. 10, pp. 1605–1609, 1981
  85. An analysis of a nonisothermal one-component sorption in a single adsorbent particle—a simplified model
    Chemical Engineering Science, vol. 36, no. 1, pp. 123–128, 1981
  86. The effect of liquid flow distribution on the behaviour of a trickle bed reactor
    Chemical Engineering Science, vol. 36, no. 6, pp. 1045–1067, 1981
  87. Computation of the flow between two rotating coaxial disks: multiplicity of steady-state solutions
    Journal of Fluid Mechanics, vol. 108, no. -1, p. 227, 1981
  88. Experimental investigation of temperature profiles, parametric sensitivity and multiple steady states in deactivated fixed bed reactors
    Chemical Engineering Science, vol. 35, no. 1-2, pp. 258–263, 1980
  89. Experimental study of traveling waves in nonadiabatic fixed bed reactors for the oxidation of carbon monoxide
    Chemical Engineering Science, vol. 35, no. 8, pp. 1769–1774, 1980
  90. Experimental observation of temperature gradients occurring in a single zeolite pellet
    Chemical Engineering Science, vol. 35, no. 12, pp. 2475–2479, 1980
  91. Multiplicity and stability in a sequence of two nonadiabatic nonisothermal CSTR
    Chemical Engineering Science, vol. 35, no. 4, pp. 987–996, 1980
  92. Modelling of chemical reactors-XXXII Nonisothermal Nonadiabatic Tubular Reactor. One Dimensional Model-detailed Analysis
    Chemical Engineering Science, vol. 34, no. 4, pp. 593–600, 1979
  93. Solution of nonlinear boundary value problems—XI One-parameter imbedding methods
    Chemical Engineering Science, vol. 34, no. 5, pp. 645–650, 1979
  94. BOUNDARY CONDITIONS FOR A TUBULAR NONISOTHERMAL NONADIABATIC PACKED BED REACTOR WITH WALL HEAT TRANSFER IN THE FORE AND AFTER SECTIONS
    Chemical Engineering Communications, vol. 3, no. 6, pp. 451–460, 1979
  95. Calculation of multicomponent distillation of non-ideal mixtures by a short-cut method
    Chemical Engineering Science, vol. 33, no. 1, pp. 77–81, 1978
  96. An analysis of a nonisothermal one-component sorption in a single adsorbent particle
    Chemical Engineering Science, vol. 33, no. 10, pp. 1385–1391, 1978
  97. Heat and mass transfer in monolithic honeycomb catalysts—III Radiation model
    Chemical Engineering Science, vol. 33, no. 7, pp. 839–845, 1978
  98. Calculation of separation columns by nonlinear block successive relaxation methods
    Chemical Engineering Science, vol. 32, no. 8, pp. 839–844, 1977
  99. Computation of the flow between two rotating coaxial disks
    Journal of Fluid Mechanics, vol. 81, no. 04, p. 689, 1977
  100. STAGE SEPARATION WITH CHEMICAL REACTION STEADY STATE COUNTERCURRENT EQUILIBRIUM STAGE SEPARATION WITH CHEMICAL REACTION BY RELAXATION METHOD
    Chemical Engineering Communications, vol. 2, no. 2, pp. 79–85, 1976
  101. Modeling of chemical reactors—XXX Steady-state analysis of combined axial and gas-to-solid heat and mass transfer in a tubular adiabatic reactor
    Chemical Engineering Science, vol. 31, no. 1, pp. 23–29, 1976
  102. Modeling of chemical reactors—XXXI The one-phase backflow cell model used for simulation of tubular adiabatic reactors
    Chemical Engineering Science, vol. 31, no. 1, pp. 31–36, 1976
  103. Solution of nonlinear boundary value problems—X The false transient method
    Chemical Engineering Science, vol. 31, no. 8, pp. 727–731, 1976
  104. Heat and mass transfer in honeycomb catalysts—II
    Chemical Engineering Science, vol. 30, no. 2, pp. 201–206, 1975
  105. Heat and mass transfer in monolithic honeycomb catalysts—I.
    Chemical Engineering Science, vol. 30, no. 1, pp. 117–123, 1975
  106. Modeling of chemical reactors—XXVIII. Steady state operation of tubular adiabatic fixed bed reactor with piston flow and external heat and mass transfer
    Chemical Engineering Science, vol. 29, no. 12, pp. 2333–2338, 1974
  107. Solution of counter-current separation processes—IV. Application of the GPM method to solution of distillation problems
    Chemical Engineering Science, vol. 29, no. 2, pp. 435–441, 1974
  108. Solution of nonlinear boundary value problems—VII A novel method: differentiation with respect to boundary condition
    Chemical Engineering Science, vol. 28, no. 4, pp. 1049–1052, 1973
  109. Calculation of multistage countercurrent separation processes-I. Multicomponent multistage rectification by differentiation with respect to an actual parameter
    Chemical Engineering Science, vol. 28, no. 8, pp. 1555–1563, 1973
  110. Calculation of multistage countercurrent separation processes—II multicomponent multistage separation by relaxation procedure
    Chemical Engineering Science, vol. 28, no. 10, pp. 1825–1832, 1973
  111. Modeling of chemical reactors—XXVII. Steady state axial heat and mass transfer in tubular reactors. Effect of different values of Peclet numbers on the region of multiplicity
    Chemical Engineering Science, vol. 28, no. 10, pp. 1897–1900, 1973
  112. Über die Berechnung von autothermen Reaktoren
    Chemie Ingenieur Technik - CIT, vol. 45, no. 22, pp. 1308–1313, 1973
  113. Solution of nonlinear boundary value problems—Va a novel method: general parameter mapping (GPM)
    Chemical Engineering Science, vol. 27, no. 4, pp. 743–750, 1972
  114. Solution of nonlinear boundary value problems—VI. Application of compact high-order-difference schemes
    Chemical Engineering Science, vol. 27, no. 10, pp. 1829–1834, 1972
  115. Packed bed axial thermal conductivity
    Chemical Engineering Science, vol. 27, no. 10, pp. 1845–1851, 1972
  116. Modeling of chemical reactors—XXV Cylindrical and spherical reaction with radial flow
    Chemical Engineering Science, vol. 27, no. 2, pp. 177–186, 1972
  117. A method for determining effects of diffusion on antocatalytic chemical reactions
    Journal of Theoretical Biology, vol. 36, no. 2, pp. 283–290, 1972