T. J. Lu

Articles in Scholarly Journals [Incomplete List]

  1. On the thermal performance of wire-screen meshes as heat exchanger material
    International Journal of Heat and Mass Transfer, vol. 50, no. 5-6, pp. 1141–1154, 2007
  2. Endwall heat transfer and fluid flow around an inclined short cylinder
    International Journal of Heat and Mass Transfer, vol. 50, no. 5-6, pp. 919–930, 2007
  3. Structural optimization of two-dimensional cellular metals cooled by forced convection
    International Journal of Heat and Mass Transfer, vol. 50, no. 13-14, pp. 2590–2604, 2007
  4. Cross flow heat exchange of textile cellular metal core sandwich panels
    International Journal of Heat and Mass Transfer, vol. 50, no. 13-14, pp. 2521–2536, 2007
  5. Minimum weights of pressurized hollow sandwich cylinders with ultralight cellular cores
    International Journal of Solids and Structures, vol. 44, no. 10, pp. 3231–3266, 2007
  6. Optimal design of box-section sandwich beams in three-point bending
    International Journal of Solids and Structures, vol. 44, no. 14-15, pp. 4742–4769, 2007
  7. Finite element method for generalized piezothermoelastic problems
    International Journal of Solids and Structures, vol. 44, no. 18-19, pp. 6330–6339, 2007
  8. Axial load capacity of cold-formed steel wall stud with sheathing
    Thin-Walled Structures, vol. 45, no. 5, pp. 537–551, 2007
  9. Forced convection in metallic honeycomb structures
    International Journal of Heat and Mass Transfer, vol. 49, no. 19-20, pp. 3313–3324, 2006
  10. Design optimization of truss-cored sandwiches with homogenization
    International Journal of Solids and Structures, vol. 43, no. 25-26, pp. 7891–7918, 2006
  11. Cross-property relations for two-phase planar composites
    Computational Materials Science, vol. 35, no. 4, pp. 408–415, 2006
  12. On the prediction of pressure drop across banks of inclined cylinders
    International Journal of Heat and Fluid Flow, vol. 27, no. 2, pp. 311–318, 2006
  13. Young's modulus measurement of thin-film materials using micro-cantilevers
    Journal of Micromechanics and Microengineering, vol. 16, no. 10, pp. 1926–1934, 2006
  14. Design and fabrication of a micro zinc/air battery
    Journal of Physics: Conference Series, vol. 34, pp. 800–805, 2006
  15. Vector J-Integral Analysis of Crack Interaction With Pre-existing Singularities
    Journal of Applied Mechanics, vol. 73, no. 5, p. 876, 2006
  16. MEMS actuators and sensors: observations on their performance and selection for purpose
    Journal of Micromechanics and Microengineering, vol. 15, no. 7, pp. S153–S164, 2005
  17. Optimal Design of a Novel High Authority SMA Actuator
    Mechanics of Advanced Materials and Structures, vol. 12, no. 3, pp. 217–227, 2005
  18. Database and Selection Method for Portable Power Sources
    Advanced Engineering Materials, vol. 7, no. 8, pp. 755–765, 2005
  19. Natural convection in metal foams with open cells
    International Journal of Heat and Mass Transfer, vol. 48, no. 12, pp. 2452–2463, 2005
  20. Contribution of vortex structures and flow separation to local and overall pressure and heat transfer characteristics in an ultralightweight lattice material
    International Journal of Heat and Mass Transfer, vol. 48, no. 19-20, pp. 4243–4264, 2005
  21. Sound transmission through lightweight double-leaf partitions: theoretical modelling
    Journal of Sound and Vibration, vol. 286, no. 4-5, pp. 817–847, 2005
  22. Dynamic crashing and impact energy absorption of 3D braided composite tubes
    Materials Letters, vol. 59, no. 12, pp. 1491–1496, 2005
  23. Optimal design of compression corrugated panels
    Thin-Walled Structures, vol. 43, no. 3, pp. 477–498, 2005
  24. The role of frame members and sheathing in partition wall panels subjected to compression
    Thin-Walled Structures, vol. 43, no. 6, pp. 983–1002, 2005
  25. A variational method for non-linear micropolar composites
    Mechanics of Materials, vol. 37, no. 4, pp. 407–425, 2005
  26. Active cooling by metallic sandwich structures with periodic cores
    Progress in Materials Science, vol. 50, no. 7, pp. 789–815, 2005
  27. An experimental study on the axial behaviour of cold-formed steel wall studs and panels
    Thin-Walled Structures, vol. 42, no. 4, pp. 557–573, 2004
  28. Minimum weight of cold-formed steel sections under compression
    Thin-Walled Structures, vol. 42, no. 4, pp. 515–532, 2004
  29. The temperature dependence of effective thermal conductivity of open-celled steel alloy foams
    Materials Science and Engineering A, vol. 367, no. 1-2, pp. 123–131, 2004
  30. Convective heat dissipation with lattice-frame materials
    Mechanics of Materials, vol. 36, no. 8, pp. 767–780, 2004
  31. Racking strength and stiffness of cold-formed steel wall frames
    Journal of Constructional Steel Research, vol. 60, no. 7, pp. 1069–1093, 2004
  32. Multi-objective and multi-loading optimization of ultralightweight truss materials
    International Journal of Solids and Structures, vol. 41, no. 3-4, pp. 619–635, 2004
  33. On the path dependence of the J-integral in notch problems
    International Journal of Solids and Structures, vol. 41, no. 3-4, pp. 607–618, 2004
  34. Fluid-flow and endwall heat-transfer characteristics of an ultralight lattice-frame material
    International Journal of Heat and Mass Transfer, vol. 47, no. 6-7, pp. 1129–1140, 2004
  35. Experimental research on convection heat transfer in sintered porous plate channels
    International Journal of Heat and Mass Transfer, vol. 47, no. 10-11, pp. 2085–2096, 2004
  36. The effects of topology upon fluid-flow and heat-transfer within cellular copper structures
    International Journal of Heat and Mass Transfer, vol. 47, no. 14-16, pp. 3171–3186, 2004
  37. Thermal radiation in ultralight metal foams with open cells
    International Journal of Heat and Mass Transfer, vol. 47, no. 14-16, pp. 2927–2939, 2004
  38. Correlation between the elastic moduli and conductivity of two-dimensional isotropic two-phase composites
    International Journal of Fracture, vol. 126, no. 1, pp. L11–L18, 2004
  39. Minimum weight design of a high authority flexural actuator based on electro-elastomers
    Smart Materials and Structures, vol. 13, no. 5, pp. 1211–1221, 2004
  40. Recent developments and applications of invariant integrals
    Applied Mechanics Reviews, vol. 56, no. 5, p. 515, 2003
  41. Journal of Micromechanics and Microengineering, vol. 12, no. 2, pp. 168–176, 2002
  42. Analysis of microchannel heat sinks for electronics cooling
    International Journal of Heat and Mass Transfer, vol. 45, no. 24, pp. 4857–4869, 2002
  43. Design of a high authority flexural actuator using an electro-strictive polymer
    Sensors and Actuators A: Physical, vol. 99, no. 3, pp. 290–296, 2002
  44. Ultralight porous metals: From fundamentals to applications
    Acta Mechanica Sinica, vol. 18, no. 5, pp. 457–479, 2002
  45. On the design of two-dimensional cellular metals for combined heat dissipation and structural load capacity
    International Journal of Heat and Mass Transfer, vol. 44, no. 11, pp. 2163–2175, 2001
  46. Thermal conductivity of zirconia coatings with zig-zag pore microstructures
    Acta Materialia, vol. 49, no. 13, pp. 2539–2547, 2001
  47. Effect of inclusions and holes on the stiffness and strength of honeycombs
    International Journal of Mechanical Sciences, vol. 43, no. 2, pp. 487–504, 2001
  48. Conservation laws of the Jk-vector for microcrack damage in piezoelectric materials
    International Journal of Solids and Structures, vol. 38, no. 18, pp. 3233–3249, 2001
  49. The mode I crack growth resistance of metallic foams
    Journal of the Mechanics and Physics of Solids, vol. 49, no. 2, pp. 231–259, 2001
  50. Optimal design of a flexural actuator
    Journal of the Mechanics and Physics of Solids, vol. 49, no. 9, pp. 2071–2093, 2001
  51. Journal of Materials Science, vol. 36, no. 11, pp. 2773–2786, 2001
  52. Journal of Micromechanics and Microengineering, vol. 11, no. 3, pp. 195–201, 2001
  53. Sound absorption of cellular metals with semiopen cells
    The Journal of the Acoustical Society of America, vol. 108, no. 4, p. 1697, 2000
  54. A phenomenological framework of constitutive modelling for incompressible and compressible elasto-plastic solids
    International Journal of Solids and Structures, vol. 37, no. 52, pp. 7769–7786, 2000
  55. Thermal management of high power electronics with phase change cooling
    International Journal of Heat and Mass Transfer, vol. 43, no. 13, pp. 2245–2256, 2000
  56. Crack channelling and spalling in a plate due to thermal shock loading
    Journal of the Mechanics and Physics of Solids, vol. 48, no. 5, pp. 867–897, 2000
  57. Journal of Materials Science, vol. 35, no. 10, pp. 2443–2449, 2000
  58. Thermal transport and fire retardance properties of cellular aluminium alloys
    Acta Materialia, vol. 47, no. 5, pp. 1469–1485, 1999
  59. Effect of imperfections on the yielding of two-dimensional foams
    Journal of the Mechanics and Physics of Solids, vol. 47, no. 11, pp. 2235–2272, 1999
  60. Optimized acoustic properties of cellular solids
    The Journal of the Acoustical Society of America, vol. 106, no. 2, p. 756, 1999
  61. Sound absorption in metallic foams
    Journal of Applied Physics, vol. 85, no. 11, p. 7528, 1999
  62. Heat transfer efficiency of metal honeycombs
    International Journal of Heat and Mass Transfer, vol. 42, no. 11, pp. 2031–2040, 1998
  63. Heat transfer in open-cell metal foams
    Acta Materialia, vol. 46, no. 10, pp. 3619–3635, 1998
  64. The thermal shock resistance of solids
    Acta Materialia, vol. 46, no. 13, pp. 4755–4768, 1998
  65. Crack Branching in All-Oxide Ceramic Composites
    Journal of the American Ceramic Society, vol. 79, no. 1, pp. 266–274, 1996
  66. Role of Fiber Stitching in Eliminating Transverse Fracture in Cross-Ply Ceramic Composites
    Journal of the American Ceramic Society, vol. 78, no. 1, pp. 251–253, 1995
  67. Effect of matrix cracking and interface sliding on the thermal expansion of fibre-reinforced composites
    Composites, vol. 26, no. 6, pp. 403–414, 1995
  68. Thermal conductivity and expansion of cross-ply composites with matrix cracks
    Journal of the Mechanics and Physics of Solids, vol. 43, no. 8, pp. 1175–1198, 1995
  69. Delamination of beams under transverse shear and bending
    Materials Science and Engineering A, vol. 188, no. 1-2, pp. 103–112, 1994
  70. Investigation of the influence mechanisms of resin matrices on the strength of filamentary structures
    Acta Mechanica Solida Sinica, vol. 4, no. 2, pp. 189–205, 1991
  71. The effect of resin properties on the strength of filamentary structures
    The Journal of Strain Analysis for Engineering Design, vol. 24, no. 2, pp. 107–113, 1989