C. Soutis

Articles in Scholarly Journals [Incomplete List]

  1. Crushing energy absorption of GFRP sandwich panels and corresponding monolithic laminates
    Composites Part A: Applied Science and Manufacturing, vol. 38, no. 4, pp. 1149–1158, 2007
  2. Piezoelectric transducer arrangement for the inspection of large composite structures
    Composites Part A: Applied Science and Manufacturing, vol. 38, no. 4, pp. 1121–1130, 2007
  3. Stiffness and fracture analysis of laminated composites with off-axis ply matrix cracking
    Composites Part A: Applied Science and Manufacturing, vol. 38, no. 4, pp. 1262–1269, 2007
  4. Prediction of crushing morphology of GRP composite sandwich panels under edgewise compression
    Composites Part B: Engineering, vol. 38, no. 7-8, pp. 914–923, 2007
  5. A study on the compressive strength of thick carbon fibre–epoxy laminates
    Composites Science and Technology, vol. 67, no. 10, pp. 2015–2026, 2007
  6. Modelling off-axis ply matrix cracking in continuous fibre-reinforced polymer matrix composite laminates
    Journal of Materials Science, vol. 41, no. 20, pp. 6789–6799, 2006
  7. Experimental research on strain monitoring in composite plates using embedded SMA wires
    Smart Materials and Structures, vol. 15, no. 4, pp. 1047–1053, 2006
  8. Non-destructive inspection of sandwich and repaired composite laminated structures
    Composites Science and Technology, vol. 65, no. 13, pp. 2059–2067, 2005
  9. Prediction of Impact-Induced Fibre Damage in Circular Composite Plates
    Applied Composite Materials, vol. 12, no. 2, pp. 109–131, 2005
  10. Thickness effect on the compressive strength of T800/924C carbon fibre?epoxy laminates
    Composites Part A: Applied Science and Manufacturing, vol. 36, no. 2, pp. 213–227, 2005
  11. Lamb waves for the non-destructive inspection of monolithic and sandwich composite beams
    Composites Part A: Applied Science and Manufacturing, vol. 36, no. 2, pp. 189–195, 2005
  12. Carbon fiber reinforced plastics in aircraft construction
    Materials Science and Engineering: A, 2005
  13. Fibre reinforced composites in aircraft construction
    Progress in Aerospace Sciences, vol. 41, no. 2, pp. 143–151, 2005
  14. Analysis of composite laminates with intra- and interlaminar damage
    Progress in Aerospace Sciences, vol. 41, no. 2, pp. 152–173, 2005
  15. Predicting the ultimate load of a CFRP wingbox
    Composites Part A: Applied Science and Manufacturing, vol. 35, no. 7-8, pp. 895–903, 2004
  16. Real-time nondestructive evaluation of fiber composite laminates using low-frequency Lamb waves
    The Journal of the Acoustical Society of America, vol. 111, no. 5, p. 2026, 2002
  17. Journal of Enterprising Culture, vol. 10, no. 1, p. 1, 2002
  18. Size effect on compressive strength of T300/924C carbon fibre-epoxy laminates
    Plastics, Rubber and Composites, vol. 31, no. 8, pp. 364–370, 2002
  19. Compressive response of notched, woven fabric, face sheet honeycomb sandwich panels
    Plastics, Rubber and Composites, vol. 31, no. 9, pp. 392–397, 2002
  20. International Applied Mechanics, vol. 38, no. 2, pp. 240–252, 2002
  21. International Applied Mechanics, vol. 38, no. 6, pp. 641–657, 2002
  22. Analysis of local delaminations in composite laminates with angle-ply matrix cracks
    International Journal of Solids and Structures, vol. 39, no. 6, pp. 1515–1537, 2002
  23. Compressive fracture of non-linear composites undergoing large deformations
    International Journal of Solids and Structures, vol. 38, no. 21, pp. 3759–3770, 2001
  24. A 3-D stability theory applied to layered rocks undergoing finite deformations in biaxial compression
    European Journal of Mechanics - A/Solids, vol. 20, no. 1, pp. 139–153, 2001
  25. Predicting fracture of layered composites caused by internal instability
    Composites Part A: Applied Science and Manufacturing, vol. 32, no. 9, pp. 1243–1253, 2001
  26. Editorial
    Composites Part A: Applied Science and Manufacturing, vol. 32, no. 9, p. 1187, 2001
  27. Delamination Detection in Composite Laminates from Variations of their Modal Characteristics
    Journal of Low Frequency Noise, Vibration and Active Control, vol. 19, no. 1, pp. 27–33, 2000
  28. Apparent strength scaling in continuous fiber composite laminates
    Composites Science and Technology, vol. 60, no. 2, pp. 283–299, 2000
  29. A method for predicting the fracture toughness of CFRP laminates failing by fibre microbuckling
    Composites Part A: Applied Science and Manufacturing, vol. 31, no. 7, pp. 733–740, 2000
  30. Strength prediction of patch-repaired CFRP laminates loaded in compression
    Composites Science and Technology, vol. 60, no. 7, pp. 1103–1114, 2000
  31. The effect of delaminations induced by transverse cracks and splits on stiffness properties of composite laminates
    Composites Part A: Applied Science and Manufacturing, vol. 31, no. 2, pp. 107–119, 2000
  32. Stiffness degradation in cross-ply laminates damaged by transverse cracking and splitting
    Composites Part A: Applied Science and Manufacturing, vol. 31, no. 4, pp. 335–351, 2000
  33. Journal of Materials Science, vol. 35, no. 14, pp. 3441–3446, 2000
  34. Compressive failure of 0° unidirectional carbon-fibre-reinforced plastic (CFRP) laminates by fibre microbuckling
    Composites Science and Technology, vol. 59, no. 9, pp. 1451–1455, 1999
  35. Compressive behaviour of CFRP laminates repaired with adhesively bonded external patches
    Composite Structures, vol. 45, no. 4, pp. 289–301, 1999
  36. DELAMINATION DETECTION IN COMPOSITE LAMINATES FROM VARIATIONS OF THEIR MODAL CHARACTERISTICS
    Journal of Sound and Vibration, vol. 228, no. 1, pp. 1–9, 1999
  37. Effect of off-axis ply orientation on 0°-fibre microbuckling
    Composites Part A: Applied Science and Manufacturing, vol. 30, no. 10, pp. 1197–1207, 1999
  38. Applied Composite Materials, vol. 5, no. 6, pp. 365–378, 1998
  39. Interlaminar stresses in composite laminates with a circular hole
    Composite Structures, vol. 37, no. 2, pp. 223–232, 1997
  40. Influence of shear properties and fibre imperfections on the compressive behaviour of GFRP laminates
    Applied Composite Materials, vol. 2, no. 6, pp. 327–342, 1996
  41. Post-impact compressive behaviour of low temperature curing woven CFRP laminates
    Composites, vol. 26, no. 9, pp. 661–667, 1995
  42. Strain energy release rate associated with local delamination in cracked composite laminates
    Composites, vol. 25, no. 9, pp. 851–862, 1994
  43. The effect of fibre length on fracture toughness and notched strength of short carbon fibre/epoxy composites
    Composites, vol. 25, no. 6, pp. 407–413, 1994
  44. Comparison of the stresses generated at the pin-bone interface by standard and conical external fixator pins
    Biomaterials, vol. 15, no. 6, pp. 471–473, 1994
  45. A finite element analysis of the effect of pin distribution on the rigidity of a unilateral external fixation system
    Injury, vol. 24, no. 8, pp. 525–527, 1993
  46. Pin-hole shear stresses generated by conical and standard external fixation pins
    Biomaterials, vol. 14, no. 11, pp. 876–878, 1993
  47. Bending stiffness of conical and standard external fixator pins
    Biomaterials, vol. 14, no. 13, pp. 1036–1038, 1993
  48. Compression fatigue behaviour of notched carbon fibre-epoxy laminates
    International Journal of Fatigue, vol. 13, no. 4, pp. 303–312, 1991