Jooho Moon

Articles in Scholarly Journals [Incomplete List]

  1. An investigation of the interfacial stability between the anode and electrolyte layer of LSGM-based SOFCs
    Journal of Materials Science, vol. 42, no. 6, pp. 1866–1871, 2007
  2. Synthesis and size control of monodisperse copper nanoparticles by polyol method
    Journal of Colloid and Interface Science, vol. 311, no. 2, pp. 417–424, 2007
  3. Effect of starting particulate materials on microstructure and cathodic performance of nanoporous LSM–YSZ composite cathodes
    Journal of Power Sources, vol. 167, no. 2, pp. 258–264, 2007
  4. Effects of anode and electrolyte microstructures on performance of solid oxide fuel cells
    Journal of Power Sources, vol. 169, no. 2, pp. 265–270, 2007
  5. Influence of patterned electrode geometry on performance of co-planar, single-chamber, solid oxide fuel cell
    Journal of Power Sources, vol. 171, no. 2, pp. 511–516, 2007
  6. Fabrication of a solution-processed thin-film transistor using zinc oxide nanoparticles and zinc acetate
    Superlattices and Microstructures, vol. 42, no. 1-6, pp. 361–368, 2007
  7. Ni-YSZ cermet anode fabricated from NiO-YSZ composite powder for high-performance and durability of solid oxide fuel cells
    Solid State Ionics, vol. 178, no. 21-22, pp. 1304–1309, 2007
  8. Organic thin film transistor using silver electrodes by the ink-jet printing technology
    Thin Solid Films, vol. 515, no. 19, pp. 7692–7696, 2007
  9. Direct writing of copper conductive patterns by ink-jet printing
    Thin Solid Films, vol. 515, no. 19, pp. 7706–7711, 2007
  10. Organic thin-film transistors using thin ormosil-based hybrid dielectric
    Thin Solid Films, vol. 515, no. 19, pp. 7701–7705, 2007
  11. Facile Route to Aligned One-Dimensional Arrays of Colloidal Nanoparticles
    Chemistry of Materials, vol. 19, no. 7, pp. 1531–1533, 2007
  12. Fabrication of Monodisperse Asymmetric Colloidal Clusters by Using Contact Area Lithography (CAL)
    Journal of the American Chemical Society, vol. 129, no. 46, pp. 14232–14239, 2007
  13. Organic thin film transistors with ink-jet printed metal nanoparticle electrodes of a reduced channel length by laser ablation
    Applied Physics Letters, vol. 91, no. 7, p. 071114, 2007
  14. Preparation of Nanocrystalline CeO2 by the Precipitation Method and Its Improved Methane Oxidation Activity
    Journal of the American Ceramic Society, vol. 89, no. 1, pp. 343–345, 2006
  15. Fabrication of the Organic Thin-Film Transistors Based on Ink-Jet Printed Silver Electrodes
    Molecular Crystals and Liquid Crystals, vol. 459, no. 1, pp. 35/[315]–43/[323], 2006
  16. Ink-Jet Printing of Silver Conductive Tracks on Flexible Substrates
    Molecular Crystals and Liquid Crystals, vol. 459, no. 1, pp. 45/[325]–55/[335], 2006
  17. Synthesis of silver nanoparticles using the polyol process and the influence of precursor injection
    Nanotechnology, vol. 17, no. 16, pp. 4019–4024, 2006
  18. Influence of silanol groups on the electrical performance of organic thin-film transistors utilizing organosiloxane-based organic–inorganic hybrid dielectrics
    Nanotechnology, vol. 18, no. 2, p. 025204, 2006
  19. Organic-inorganic hybrid dielectrics with low leakage current for organic thin-film transistors
    Applied Physics Letters, vol. 89, no. 9, p. 092101, 2006
  20. Direct writing of silver conductive patterns: Improvement of film morphology and conductance by controlling solvent compositions
    Applied Physics Letters, vol. 89, no. 26, p. 264101, 2006
  21. Single-Chamber Solid Oxide Fuel Cell with Micropatterned Interdigitated Electrodes
    Electrochemical and Solid-State Letters, vol. 9, no. 5, p. A228, 2006
  22. Langmuir, vol. 22, no. 8, pp. 3506–3513, 2006
  23. Chemistry of Materials, vol. 18, no. 5, pp. 1085–1088, 2006
  24. Nano-composite materials for high-performance and durability of solid oxide fuel cells
    Journal of Power Sources, vol. 163, no. 1, pp. 392–397, 2006
  25. Effect of metal (Al, Ga, and In)-dopants and/or Ag-nanoparticles on the optical and electrical properties of ZnO thin films
    Thin Solid Films, vol. 515, no. 3, pp. 957–960, 2006
  26. Direct-write fabrication of integrated planar solid oxide fuel cells
    Journal of Electroceramics, vol. 17, no. 2-4, pp. 683–687, 2006
  27. Influences of starting particulate materials on microstructural evolution and electrochemical activity of LSM-YSZ composite cathode for SOFC
    Journal of Electroceramics, vol. 17, no. 2-4, pp. 759–764, 2006
  28. Co-planar type single chamber solid oxide fuel cell with micro-patterned electrodes
    Journal of Electroceramics, vol. 17, no. 2-4, pp. 689–693, 2006
  29. Performance and durability of Ni-coated YSZ anodes for intermediate temperature solid oxide fuel cells
    Solid State Ionics, vol. 177, no. 9-10, pp. 931–938, 2006
  30. Corrigendum to “Performance and durability of Ni-coated YSZ anodes for intermediate temperature solid oxide fuel cells” [Solid State Ionics 177/9-10 (2006) 931–938]
    Solid State Ionics, vol. 177, no. 15-16, pp. 1389–1390, 2006
  31. Intermediate temperature solid oxide fuel cell using (La,Sr)(Co,Fe)O3-based cathodes
    Solid State Ionics, vol. 177, no. 35-36, pp. 3211–3216, 2006
  32. Electrochemical decomposition of NO over composite electrodes on YSZ electrolyte
    Journal of the European Ceramic Society, vol. 26, no. 6, pp. 981–986, 2006
  33. Formation of photoresist-free patterned ZnO film containing nano-sized Ag by photochemical solution deposition
    Applied Surface Science, vol. 252, no. 21, pp. 7739–7742, 2006
  34. Erratum to “Formation of photoresist-free patterned ZnO film containing nano-sized Ag by photochemical solution deposition” [Appl. Surf. Sci. 252 (2006) 7739–7742]
    Applied Surface Science, vol. 253, no. 4, pp. 2355–2355, 2006
  35. Uniform Y2O3 coating on multi-component phosphor powders by modified polyol process
    Journal of Colloid and Interface Science, vol. 297, no. 2, pp. 589–594, 2006
  36. Direct-write fabrication of colloidal photonic crystal microarrays by ink-jet printing
    Journal of Colloid and Interface Science, vol. 298, no. 2, pp. 713–719, 2006
  37. Fabrication of inorganic–organic hybrid films for optical waveguide
    Journal of Non-Crystalline Solids, vol. 351, no. 43-45, pp. 3530–3535, 2005
  38. Fabrication and characterization of anode-supported electrolyte thin films for intermediate temperature solid oxide fuel cells
    Journal of Power Sources, vol. 139, no. 1-2, pp. 67–72, 2005
  39. Electrochemical and microstructural characterization of polymeric resin-derived multilayered composite cathode for SOFC
    Journal of Power Sources, vol. 145, no. 2, pp. 272–277, 2005
  40. Optical properties of single droplet of photonic crystal assembled by ink-jet printing
    Applied Physics Letters, vol. 86, no. 24, p. 241114, 2005
  41. Fabrication of Patterned Inorganic-Organic Hybrid Film for the Optical Waveguide by Microfluidic Lithography
    Journal of the American Ceramic Society, vol. 88, no. 4, pp. 1033–1036, 2005
  42. Vacuum-Assisted Microfluidic Lithography of Ceramic Microstructures
    Journal of the American Ceramic Society, vol. 88, no. 5, pp. 1171–1174, 2005
  43. Proton Conducting Organic-Inorganic Nanocomposite Membranes from MPTS and GPTS
    Electrochemical and Solid-State Letters, vol. 8, no. 4, p. A191, 2005
  44. Highly Conductive Ink Jet Printed Films of Nanosilver Particles for Printable Electronics
    Electrochemical and Solid-State Letters, vol. 8, no. 11, p. J30, 2005
  45. NO decomposition over the electrochemical cell of lanthanum stannate pyrochlore and YSZ composite electrode
    Solid State Ionics, vol. 175, no. 1-4, pp. 625–629, 2004
  46. Fabrication of colloidal self-assembled monolayer (SAM) using monodisperse silica and its use as a lithographic mask
    Thin Solid Films, vol. 447-448, pp. 638–644, 2004
  47. Fabrication of photo-patternable inorganic?organic hybrid film by spin-coating
    Thin Solid Films, vol. 466, no. 1-2, pp. 204–208, 2004
  48. Chemistry of Materials, vol. 16, no. 22, pp. 4212–4215, 2004
  49. Formation mechanisms and morphological changes during the hydrothermal synthesis of BaTiO3 particles from a chemically modified, amorphous titanium (hydrous) oxide precursor
    Journal of the European Ceramic Society, vol. 23, no. 12, pp. 2153–2161, 2003
  50. Fabrication of Atomic Force Microscope Probe with Low Spring Constant Using SU-8 Photoresist
    Japanese Journal of Applied Physics, vol. 42, no. Part 2, No. 10A, pp. L1171–L1174, 2003
  51. Catalysis Letters, vol. 87, no. 3/4, pp. 219–223, 2003
  52. Microtransfer Molding of Gelcasting Suspensions to Fabricate Barrier Ribs for Plasma Display Panel
    Journal of the American Ceramic Society, vol. 86, no. 11, pp. 1969–1972, 2003
  53. Phase development of barium titanate from chemically modified-amorphous titanium (hydrous) oxide precursor
    Journal of the European Ceramic Society, vol. 22, no. 6, pp. 809–815, 2002
  54. Read/write mechanisms and data storage system using atomic force microscopy and MEMS technology
    Ultramicroscopy, vol. 91, no. 1-4, pp. 103–110, 2002
  55. Journal of Materials Science, vol. 36, no. 4, pp. 949–955, 2001
  56. Preparation and characterization of nanocrystalline doped TiO2
    Advanced Powder Technology, vol. 11, no. 2, pp. 211–220, 2000
  57. Microstructure control of an oxide superconductor on interaction of pinning centers and growing crystal surface
    Physica C: Superconductivity, vol. 341-348, pp. 2017–2018, 2000
  58. Langmuir, vol. 15, no. 13, pp. 4328–4334, 1999
  59. Recent developments in the preparation and properties of nanometer-size spherical and platelet-shaped particles and composite particles
    Materials Science and Engineering: R: Reports, vol. 23, no. 4-5, pp. 139–242, 1998