Donglu Shi

Articles in Scholarly Journals [Incomplete List]

  1. Coating nanothickness degradable films on nanocrystalline hydroxyapatite particles to improve the bonding strength between nanohydroxyapatite and degradable polymer matrix
    Journal of Biomedical Materials Research Part A, vol. 82A, no. 2, pp. 373–382, 2007
  2. Synthesis of a phase-pure orthorhombic YBa2Cu3Ox under low oxygen pressure?
    Materials Letters, vol. 61, no. 14-15, pp. 2859–2861, 2007
  3. Modification of nanostructured materials for biomedical applications
    Materials Science and Engineering: C, vol. 27, no. 3, pp. 579–594, 2007
  4. Characterization of carbon nanotube/nanofiber-reinforced polymer composites using an instrumented indentation technique?
    Composites Part B: Engineering, vol. 38, no. 1, pp. 58–65, 2007
  5. Neutron diffraction study of the structure and low-temperature phase transformation in ternary NiAl+M (M=Ni,Fe,Co) alloys
    Scripta Materialia, vol. 56, no. 10, pp. 911–914, 2007
  6. Computation reduction for intra 4×4 mode decision with SATD criterion in H.264/AVC
    IET Signal Processing, vol. 1, no. 3, p. 121, 2007
  7. In situ high temperature optical microscopy study of phase evolution in YBa2Cu3O7-d films prepared by a fluorine-free sol–gel route
    Physica C: Superconductivity, vol. 436, no. 2, pp. 62–67, 2006
  8. Modulus study of microcracks in single domain YBa2Cu3Ox with c-axis pressure during oxygen anneal
    Physica C: Superconductivity, vol. 443, no. 1-2, pp. 18–22, 2006
  9. Synthesis and characterization of superparamagnetic composite nanorings
    Materials Letters, vol. 60, no. 24, pp. 2929–2932, 2006
  10. Luminescent Carbon Nanotubes by Surface Functionalization
    Advanced Materials, vol. 18, no. 2, pp. 189–193, 2006
  11. Effects of surface modification, carbon nanofiber concentration, and dispersion time on the mechanical properties of carbon-nanofiber–polycarbonate composites
    Journal of Applied Polymer Science, vol. 103, no. 6, pp. 3792–3797, 2006
  12. Surface modification and ultrasonication effect on the mechanical properties of carbon nanofiber/polycarbonate composites
    Composites Part A: Applied Science and Manufacturing, vol. 37, no. 9, pp. 1270–1275, 2006
  13. Introduction to carbon nanotube and nanofiber smart materials
    Composites Part B: Engineering, vol. 37, no. 6, pp. 382–394, 2006
  14. Luminescent hydroxylapatite nanoparticles by surface functionalization
    Applied Physics Letters, vol. 89, no. 18, p. 183106, 2006
  15. Improving the Mechanical Properties of Polycarbonate Nanocomposites with Plasma-Modified Carbon Nanofibers
    Journal of Macromolecular Science, Part B: Physics, vol. 45, no. 4, pp. 671–679, 2006
  16. Deposition of ultrathin rare-earth doped Y2O3 phosphor films on alumina nanoparticles
    Nanotechnology, vol. 17, no. 5, pp. 1351–1354, 2006
  17. A carbon nanotube strain sensor for structural health monitoring
    Smart Materials and Structures, vol. 15, no. 3, pp. 737–748, 2006
  18. Processing Dependence of Texture, and Critical Properties of YBa2Cu3O7-delta Films on RABiTS Substrates by a Non-Fluorine MOD Method
    Journal of the American Ceramic Society, vol. 89, no. 3, pp. 914–920, 2006
  19. Carbon Nanofiber Hybrid Actuators: Part I - Liquid Electrolyte-based
    Journal of Intelligent Material Systems and Structures, vol. 17, no. 2, pp. 107–116, 2006
  20. Carbon Nanofiber Hybrid Actuators: Part II - Solid Electrolyte-based
    Journal of Intelligent Material Systems and Structures, vol. 17, no. 3, pp. 191–197, 2006
  21. Plasma deposition of thin carbonfluorine films on aligned carbon nanotube
    Applied Physics Letters, vol. 86, no. 4, p. 043107, 2005
  22. Magnetic alignment of carbon nanofibers in polymer composites and anisotropy of mechanical properties
    Journal of Applied Physics, vol. 97, no. 6, p. 064312, 2005
  23. Single-crystalline polytetrafluoroethylene-like nanotubes prepared from atmospheric plasma discharge
    Applied Physics Letters, vol. 86, no. 13, p. 131501, 2005
  24. Functionalization of single-walled carbon nanotubes using isotropic plasma treatment: Resonant Raman spectroscopy study
    Journal of Applied Physics, vol. 97, no. 10, p. 104324, 2005
  25. Microstructures and phase evolution in YBaCuO films grown on various substrates fabricated via a non-fluorine sol–gel route
    Physica C: Superconductivity, vol. 426-431, pp. 1408–1414, 2005
  26. High superconductor re-entrant cavity filter structures
    Physica C: Superconductivity, vol. 425, no. 1-2, pp. 44–51, 2005
  27. Electroless Plating of Thin Silver Films on Porous AlO Substrate and the Study of Deposition Kinetics
    Tsinghua Science & Technology, vol. 10, no. 6, pp. 680–689, 2005
  28. The Journal of Physical Chemistry B, vol. 109, no. 49, pp. 23351–23357, 2005
  29. Suppression of ab-plane crack formation in single domain YBa2Cu3Ox by uniaxial c-axis pressure
    Physica C: Superconductivity, vol. 402, no. 1-2, pp. 72–79, 2004
  30. Surface resistance measurements of single domain YBa2Cu3Ox
    Physica C: Superconductivity, vol. 402, no. 3, pp. 277–282, 2004
  31. The development of Y Ba2Cu3Ox thin films using a fluorine-free sol–gel approach for coated conductors
    Superconductor Science and Technology, vol. 17, no. 12, pp. 1420–1425, 2004
  32. Structural characterization of epitaxial YBCO thin films prepared by a fluorine-free sol–gel method for coated conductors
    Superconductor Science and Technology, vol. 16, no. 8, pp. 838–844, 2003
  33. Crystallization, phase transition and optical properties of the rare-earth-doped nanophosphors synthesized by chemical deposition
    Nanotechnology, vol. 14, no. 6, pp. 670–674, 2003
  34. Plasma coating of carbon nanofibers for enhanced dispersion and interfacial bonding in polymer composites
    Applied Physics Letters, vol. 83, no. 25, p. 5301, 2003
  35. Kinetics study of ab-plane crack propagation by a modulus measurement in single domain YBa2Cu3Ox
    Physica C: Superconductivity, vol. 384, no. 1-2, pp. 149–158, 2003
  36. Effect of precursor stoichiometry on the superconducting properties of fluorine-free sol–gel YBCO thin films
    Physica C: Superconductivity, vol. 386, pp. 348–352, 2003
  37. Fluorine-free sol gel deposition of epitaxial YBCO thin films for coated conductors
    Physica C: Superconductivity, vol. 392-396, pp. 941–945, 2003
  38. Plasma deposition of Ultrathin polymer films on carbon nanotubes
    Applied Physics Letters, vol. 81, no. 27, p. 5216, 2002
  39. Deposition and interface structures of YBCO thin films via a non-fluorine sol–gel route
    Physica C: Superconductivity, vol. 371, no. 2, pp. 97–103, 2002
  40. The effect of structural characteristics on thein vitro bioactivity of hydroxyapatite
    Journal of Biomedical Materials Research, vol. 63, no. 1, pp. 71–78, 2002
  41. Interface structure of YBa2Cu3Ox thin films prepared by a non-fluorine sol$ndash$gel route on a single-domain substrate
    Superconductor Science and Technology, vol. 15, no. 5, pp. 660–664, 2002
  42. Deposition of epitaxial YBCO thin film on single domain YBCO substrate for the development of RF components
    IEEE Transactions on Appiled Superconductivity, vol. 11, no. 1, pp. 2865–2868, 2001
  43. Interface structural evolution of YBa2Cu3Ox from a randomly oriented silver alloy substrate
    Physica C: Superconductivity, vol. 353, no. 3-4, pp. 258–264, 2001
  44. Epitaxial growth of YBa2Cu3Ox film on single-domain YBCO substrate for rf component development
    Physica C: Superconductivity, vol. 354, no. 1-4, pp. 71–76, 2001
  45. Uniform deposition of ultrathin polymer films on the surfaces of Al[sub 2]O[sub 3] nanoparticles by a plasma treatment
    Applied Physics Letters, vol. 78, no. 9, p. 1243, 2001
  46. Surface resistance of single domain YBCO
    Physica C: Superconductivity, vol. 341-348, pp. 2657–2658, 2000
  47. In vitro bioactive behavior of hydroxylapatite-coated porous Al2O3
    Journal of Biomedical Materials Research, vol. 53, no. 5, pp. 457–466, 2000
  48. Superconductor Science and Technology, vol. 13, no. 6, pp. 902–907, 2000
  49. Net-shape processing of single-domain YBa2Cu3Ox for a novel high-Q millimeter wave resonator
    Physica C: Superconductivity, vol. 315, no. 1-2, pp. 36–44, 1999
  50. Growth anisotropy in seeded melt growth of YBaCuO
    Materials Science and Engineering B, vol. 53, no. 1-2, pp. 18–22, 1998
  51. Synthesis of hydroxyapatite films on porous Al2O3 substrate for hard tissue prosthetics
    Materials Science and Engineering: C, vol. 6, no. 2-3, pp. 175–182, 1998
  52. An experimental investigation of the off-diagonal Seebeck effect on textured YBCO high-Tc superconductor
    Applied Superconductivity, vol. 4, no. 12, pp. 619–623, 1998
  53. Angle dependence of levitation force in a YBa2Cu3Ox sphere
    Physica C: Superconductivity, vol. 309, no. 1-2, pp. 89–97, 1998
  54. Journal of Superconductivity: Incorporating Novel Magnetism, vol. 11, no. 5, pp. 575–580, 1998
  55. Coating of hydroxyapatite on highly porous Al2O3 substrate for bone substitutes
    Journal of Biomedical Materials Research, vol. 43, no. 1, pp. 77–81, 1998
  56. Angle dependence of magnetization in a single-domain YBa_{2}Cu_{3}O_{x} sphere
    Physical Review B, vol. 58, no. 17, pp. 11761–11767, 1998
  57. Effect of extremely fine Y[sub 2]BaCuO[sub 5] precipitates on the critical current density of melt-processed YBa[sub 2]Cu[sub 3]O[sub x]
    Journal of Applied Physics, vol. 81, no. 11, p. 7396, 1997
  58. Effect of sample geometry on levitation force in seeded-melt-grown single-domain YBa/sub 2/Cu/sub 3/O/sub x/
    IEEE Transactions on Appiled Superconductivity, vol. 7, no. 2, pp. 1929–1932, 1997
  59. Domain-orientation dependence of levitation force in seeded melt grown single-domain YBa[sub 2]Cu[sub 3]O[sub x]
    Applied Physics Letters, vol. 70, no. 26, p. 3606, 1997
  60. Frequency dependence of the higher harmonics susceptibilities of hydrogen loaded and unloaded melted YBCO samples*1
    Physica C: Superconductivity, vol. 282-287, pp. 2329–2330, 1997
  61. Effect of oxygenation on levitation force in seeded melt grown single-domain YBa2Cu3Ox
    Physica C: Superconductivity, vol. 291, no. 3-4, pp. 181–187, 1997
  62. BCS temperature-dependent superconducting energy gap in domain boundaries of melt-textured YBa2Cu3O7
    Journal of Superconductivity, vol. 7, no. 2, pp. 409–414, 1994
  63. Transport resistive broadening by avalanche flux motion in high-temperature superconductors: SOC in a driven system
    Solid State Communications, vol. 91, no. 9, pp. 741–746, 1994
  64. Self-organized criticality near the bean critical state: A power-law behavior of flux motion
    Solid State Communications, vol. 90, no. 6, pp. 405–408, 1994
  65. An alternative method to introduce fine Y2BaCuO5 precipitates into YBa2Cu3Ox with enhanced flux pinning
    Applied Superconductivity, vol. 2, no. 2, pp. 117–121, 1994
  66. A new method for net-shape forming of large, single-domain YBa2Cu3O6 + x
    Physica C: Superconductivity, vol. 234, no. 3-4, pp. 232–236, 1994
  67. Critical current density and irreversibility behaviour in Ag-sheathed Bi-based superconducting wires fabricated using a controlled melt procedure
    Applied Superconductivity, vol. 1, no. 10-12, pp. 1515–1522, 1993
  68. Transport critical currents and grain boundarp peak links in bulk pBa2Cu3Ox
    Applied Superconductivity, vol. 1, no. 1-2, pp. 61–70, 1993
  69. Effective flux-creep activation energy and anisotropy in a Bi2Sr2CaCu2Ox single crystal
    Applied Superconductivity, vol. 1, no. 1-2, pp. 151–156, 1993
  70. Effects of Bi-substitution for Tl in 1222-type cuprate TlSr2(Nd, Ce)2Cu2Oz
    Physica C: Superconductivity, vol. 212, no. 1-2, pp. 206–210, 1993
  71. Extremely fine precipitates and flux pinning in melt-processed YBa2Cu3Ox
    Physica C: Superconductivity, vol. 213, no. 1-2, pp. 179–184, 1993
  72. Critical current density, irreversibility line, and flux creep activation energy in silver-sheathed Bi/sub 2/Sr/sub 2/Ca/sub 2/Cu/sub 3/O/sub x/ superconducting tapes
    IEEE Transactions on Appiled Superconductivity, vol. 3, no. 1, pp. 1194–1196, 1993
  73. Enhanced flux pinning through a phase formation-decomposition-recovery process in Ag-sheathed Bi(Pb)SrCaCuO wires
    IEEE Transactions on Appiled Superconductivity, vol. 3, no. 1, pp. 1135–1138, 1993
  74. Effective activation energy in the Bi-Sr-Ca-Cu-O systems
    IEEE Transactions on Appiled Superconductivity, vol. 3, no. 1, pp. 1226–1228, 1993
  75. Penetration field studies on melt-textured YBa/sub 2/Cu/sub 3/O/sub 7- delta / from low field ultrasonic measurements
    IEEE Transactions on Appiled Superconductivity, vol. 3, no. 1, pp. 1406–1408, 1993
  76. Flux pinning by 211 precipitates in melt-processed YBa/sub 2/Cu/sub 3/O/sub x/
    IEEE Transactions on Appiled Superconductivity, vol. 3, no. 1, pp. 1034–1036, 1993
  77. Modulated microwave absorption in single crystal Bi–Sr–Ca–Cu–O
    Journal of Materials Research, vol. 7, no. 4, Article ID 1992.0837, 6 pages, 1992
  78. Effect of Y2BaCuOx precipitates on flux pinning in melt-processed YBa2Cu3Ox
    Physica C: Superconductivity, vol. 199, no. 1-2, pp. 43–49, 1992
  79. A TEM study of grain boundaries in zone-melted YBa2Cu3Ox
    Materials Letters, vol. 14, no. 2-3, pp. 177–181, 1992
  80. High-Tc superconductors: fabricating technologies and future perspectives
    Materials Chemistry and Physics, vol. 31, no. 1-2, pp. 73–78, 1992
  81. Critical currents in melt-textured YBa2Cu3Ox
    Physica C: Superconductivity, vol. 185-189, pp. 2329–2330, 1991
  82. Critical currents, magnetic relaxation and microstructure in zone-melted YBa/sub 2/Cu/sub 3/O/sub x/
    IEEE Transactions on Magnetics, vol. 27, no. 2, pp. 1080–1082, 1991
  83. Calculations of magnetic relaxation in type-II superconductors based on various critical-state models
    Physica C: Superconductivity, vol. 168, no. 3-4, pp. 303–308, 1990
  84. Synthesis of 85 K Bi_Sr_Ca_Cu_O superconductor
    Materials Research Bulletin, vol. 25, no. 2, pp. 251–256, 1990
  85. Synthesis of Tl_Ca_Ba_Cu_O superconductors
    Materials Research Bulletin, vol. 25, no. 6, pp. 791–798, 1990
  86. Synthesis of phase-pure orthorhombic YB2Cu3Ox under low oxygen pressure
    Materials Letters, vol. 8, no. 11-12, pp. 454–456, 1989
  87. Swagged superconducting wires
    Materials Letters, vol. 7, no. 12, pp. 428–432, 1989
  88. A superconducting coil made of filamentary composites
    Materials Letters, vol. 9, no. 1, pp. 1–4, 1989
  89. Temperature dependence of flux pinning in YBa2Cu3Ox
    Physica C: Superconductivity, vol. 160, no. 5-6, pp. 417–423, 1989
  90. Superconducting properties and flux pinning in Bi$z.sbnd;Sr$z.sbnd;Ca$z.sbnd;Cu$z.sbnd;O system
    Physica C: Superconductivity, vol. 162-164, pp. 927–928, 1989
  91. Effect of heat treatment time and temperature on the properties of YBa
    Journal of Materials Research, vol. 4, no. 5, Article ID 1989.1093, 5 pages, 1989
  92. 120 K superconductivity in the (Bi, Pb)-Sr-Ca-Cu-O system
    Physica C: Superconductivity, vol. 156, no. 4, pp. 649–651, 1988
  93. 110 k superconductivity in crystallized Bi-Sr-Ca-Cu-O glasses
    Physica C: Superconductivity, vol. 156, no. 5, pp. 822–826, 1988
  94. Calcination of YBa2Cu3O7-x powder
    Materials Letters, vol. 7, no. 5-6, pp. 161–164, 1988
  95. Sintering of YBa2Cu3O7-x compacts
    Materials Letters, vol. 6, no. 7, pp. 217–221, 1988
  96. Synthesis, structure and superconductivity in the Ba1-xKxBiO3-y system
    Nature, vol. 333, no. 6176, Article ID 333836a0, 2 pages, 1988