Articles in Scholarly Journals [Incomplete List]

1. Vibration Control of Rotor by Squeeze Film Damper with Magnetorheological Fluid
   Journal of Intelligent Material Systems and Structures, vol. 17, no. 4, pp. 353–357, 2006
2. Recent Developments in Turbomachinery Modeling for Improved Balancing and Vibration Response Analysis
   Journal of Engineering for Gas Turbines and Power, vol. 127, no. 3, p. 646, 2005
3. Dynamic performance and control of squeeze mode MR fluid damper–rotor system
   Smart Materials and Structures, vol. 14, no. 4, pp. 529–539, 2005
4. A comparison of techniques for identifying the configuration state of statically indeterminate rotor bearing systems
   Tribology International, vol. 37, no. 2, pp. 149–157, 2004
5. Nonlinear dynamics of a cracked rotor in a maneuvering aircraft
   Applied Mathematics and Mechanics, vol. 25, no. 10, pp. 1139–1150, 2004
6. Identification of the Modal Parameters of a Flexibly Supported Rigid Casing
   Journal of Engineering for Gas Turbines and Power, vol. 125, no. 1, p. 184, 2003
7. Transient Rotordynamic Modeling of Rolling Element Bearing Systems
   Journal of Engineering for Gas Turbines and Power, vol. 124, no. 4, p. 984, 2002
8. A non-linear transfer matrix technique for statically indeterminate rotor bearing systems
   Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 215, no. 11, pp. 1343–1355, 2001
9. Side clearance effects on squeeze film damper performance
   Tribology International, vol. 33, no. 3-4, pp. 161–165, 2000
10. A rig for testing lateral misalignment effects in a flexible rotor supported on three or more hydrodynamic journal bearings
    Tribology International, vol. 33, no. 3-4, pp. 197–204, 2000
11. Floating ring squeeze film damper: theoretical analysis
    Tribology International, vol. 33, no. 3-4, pp. 249–258, 2000
12. The influence of fluid inertia forces on the sudden unbalance responses of squeeze-film damper supported rotors
    Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 212, no. 5, pp. 353–357, 1998
13. Use of computational fluid dynamics in hydrodynamic lubrication
    Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 212, no. 6, pp. 427–436, 1998
14. An experimental evaluation of squeeze film dampers without centralizing springs
    Tribology International, vol. 29, no. 1, pp. 51–59, 1996
15. R5Ga3 compounds of selected rare earth metals R: structures and properties
    Journal of Alloys and Compounds, vol. 210, no. 1-2, pp. 1–7, 1994
16. Pressure distribution in squeeze film dampers with oil hole feed
    ARCHIVE: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 1994-1996 (vols 208-210), vol. 208, no. 210, pp. 105–112, 1994
17. Subharmonic, quasi‐periodic and chaotic motions of a rigid rotor supported by an eccentric squeeze film damper
    ARCHIVE: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1989-1996 (vols 203-210), vol. 207, no. 63, pp. 383–392, 1993
18. Cavitation Effects on Squeeze-Film Damper Performance
    Tribology Transactions, vol. 29, no. 3, pp. 353–360, 1986
19. Density and Viscosity Models for Two-Phase Homogeneous Hydrodynamic Damper Fluids
    Tribology Transactions, vol. 29, no. 3, pp. 361–369, 1986
20. An energy approach to linearizing squeeze‐film damper forces
    ARCHIVE: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1989-1996 (vols 203-210), vol. 199, no. 13, pp. 57–63, 1985
21. Experimental evaluation of the predicted behaviour of squeeze‐film‐bearing‐supported rigid rotors
    ARCHIVE: Journal of Mechanical Engineering Science 1959-1982 (vols 1-23), vol. 21, no. 6, pp. 439–451, 1979