Personal Home Page

http://www2.mec.ua.pt/machining/PDavim_Mactrib.htm

Articles in Scholarly Journals [Incomplete List]

1. Surface roughness aspects in milling MDF (medium density fibreboard)
   The International Journal of Advanced Manufacturing Technology, 2008
2. Machinability aspects concerning micro-turning of PA66-GF30-reinforced polyamide
   The International Journal of Advanced Manufacturing Technology, 2008
3. Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor
   International Journal of Machine Tools and Manufacture, vol. 48, no. 6, pp. 715–720, 2008
4. Drilling investigation of MDF (medium density fibreboard)
   Journal of Materials Processing Technology, vol. 203, no. 1-3, pp. 537–541, 2008
5. Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites
   Journal of Materials Processing Technology, vol. 203, no. 1-3, pp. 431–438, 2008
6. Investigations into the effect of cutting conditions on surface roughness in turning of free machining steel by ANN models
   Journal of Materials Processing Technology, vol. 205, no. 1-3, pp. 16–23, 2008
7. Selection of optimal MQL and cutting conditions for enhancing machinability in turning of brass
   Journal of Materials Processing Technology, vol. 204, no. 1-3, pp. 459–464, 2008
8. Analysis of surface roughness parameters in turning of FRP tubes by PCD tool
   Journal of Materials Processing Technology, vol. 204, no. 1-3, pp. 469–474, 2008
9. Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis
   Journal of Materials Processing Technology, 2008
10. Assessment of some factors influencing tool wear on the machining of glass fibre-reinforced plastics by coated cemented carbide tools
    Journal of Materials Processing Technology, 2008
11. Influence of cutting conditions on machinability aspects of PEEK, PEEK CF 30 and PEEK GF 30 composites using PCD tools
    Journal of Materials Processing Technology, 2008
12. Chemical vapour deposition (CVD) diamond coated tools performance in machining of PEEK composites
    Materials & Design, vol. 29, no. 8, pp. 1568–1574, 2008
13. Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model
    Materials & Design, vol. 29, no. 9, pp. 1768–1776, 2008
14. A study of plastic strain and plastic strain rate in machining of steel AISI 1045 using FEM analysis
    Materials & Design, 2008
15. Machinability study on precision turning of PA66 polyamide with and without glass fiber reinforcing
    Materials & Design, 2008
16. Prediction and Minimization of Delamination in Drilling of Medium-Density Fiberboard (MDF) Using Response Surface Methodology and Taguchi Design
    Materials and Manufacturing Processes, vol. 23, no. 4, pp. 377–384, 2008
17. Predicting the geometric form of clad in laser cladding by powder using multiple regression analysis (MRA)
    Materials & Design, vol. 29, no. 2, pp. 554–557, 2008
18. The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite
    Materials & Design, vol. 29, no. 2, pp. 508–513, 2008
19. Statistical study of surface roughness in turning of peek composites
    Materials & Design, vol. 29, no. 1, pp. 218–223, 2008
20. Investigative Study on Machinability Aspects of Unreinforced and Reinforced PEEK Composite Machining using ANN Model
    Journal of Reinforced Plastics and Composites, vol. 27, no. 7, pp. 751–768, 2008
21. Taguchi Approach for Achieving Better Machinability in Unreinforced and Reinforced Polyamides
    Journal of Reinforced Plastics and Composites, vol. 27, no. 9, pp. 909–924, 2008
22. Comparative study of friction behaviour of alumina and zirconia ceramics against steel under water lubricated conditions
    Industrial Lubrication and Tribology, vol. 60, no. 4, pp. 178–182, 2008
23. Thrust Force and Wear Assessment When Drilling Glass Fiber-Reinforced Polymeric Composite
    Journal of Composite Materials, vol. 42, no. 14, pp. 1401–1414, 2008
24. Prediction and optimization of surface roughness in milling of medium density fiberboard (MDF) based on Taguchi orthogonal array experiments
    Holzforschung, vol. 62, no. 2, pp. 209–214, 2008
25. Comparative evaluation of conventional and wiper ceramic tools on cutting forces, surface roughness, and tool wear in hard turning AISI D2 steel
    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 221, no. 4, pp. 625-–633, 2007
26. Integrating Taguchi principle with genetic algorithm to minimize burr size in drilling of AISI 316L stainless steel using an artificial neural network model
    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 221, no. 12, pp. 1695–1704, 2007
27. New machinability study of glass fibre reinforced plastics using polycrystalline diamond and cemented carbide (K15) tools
    Materials & Design, vol. 28, no. 3, pp. 1050–1054, 2007
28. Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts
    Journal of Materials Processing Technology, vol. 189, no. 1-3, pp. 192–198, 2007
29. A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates
    Composites Science and Technology, vol. 67, no. 9, pp. 1939–1945, 2007
30. Turning of Brasses Using Minimum Quantity of Lubricant (MQL) and Flooded Lubricant Conditions
    Materials and Manufacturing Processes, vol. 22, no. 1, pp. 45–50, 2007
31. Delamination assessment after drilling medium-density fibreboard (MDF) by digital image analysis
    Holzforschung, vol. 61, no. 3, pp. 294–300, 2007
32. Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques
    Materials & Design, vol. 28, no. 4, pp. 1186–1191, 2007
33. Application of radial basis function neural networks in optimization of hard turning of AISI D2 cold-worked tool steel with a ceramic tool
    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 221, no. 6, pp. 987–998, 2007
34. Application of Merchant theory in machining particulate metal matrix composites
    Materials & Design, vol. 28, no. 10, pp. 2684–2687, 2007
35. Evaluation of delamination in drilling medium density fibreboard
    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 221, no. 4, pp. 655–658, 2007
36. A note on tribological behaviour of a-sialon/steel couples under dry conditions
    Materials & Design, vol. 28, no. 4, pp. 1343–1347, 2007
37. Effect of crystalline structure on the hardness and interfacial adherence of flame sprayed poly(ether–ether–ketone) coatings
    European Polymer Journal, vol. 43, no. 3, pp. 1077–1082, 2007
38. Prediction of clad angle in laser cladding by powder using response surface methodology and scatter search
    Optics & Laser Technology, vol. 39, no. 6, pp. 1130–1134, 2007
39. Experimental cutting model of metal matrix composites (MMCs)
    Journal of Materials Processing Technology, vol. 183, no. 2-3, pp. 358–362, 2007
40. Drilling of fiber reinforced plastics: A review
    Journal of Materials Processing Technology, vol. 186, no. 1-3, pp. 1–7, 2007
41. Prediction on tribological behaviour of composite PEEK-CF30 using artificial neural networks
    Journal of Materials Processing Technology, vol. 189, no. 1-3, pp. 374–378, 2007
42. Taguchi multiple-performance characteristics optimization in drilling of medium density fibreboard (MDF) to minimize delamination using utility concept
    Journal of Materials Processing Technology, 2007
43. Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques
    Journal of Materials Processing Technology, 2007
44. Some experimental studies on CO2 laser cutting quality of polymeric materials
    Journal of Materials Processing Technology, 2007
45. Application of Taguchi techniques to study dry sliding wear behaviour of metal matrix composites
    Materials & Design, vol. 28, no. 4, pp. 1393–1398, 2007
46. Mathematical model to predict tool wear on the machining of glass fibre reinforced plastic composites
    Materials & Design, vol. 28, no. 7, pp. 2008–2014, 2007
47. Experimental characterization of frictional behaviour of clutch facings using Pin-on-disk machine
    Materials & Design, vol. 28, no. 7, pp. 2148–2153, 2007
48. Optimization of electrical discharge machining characteristics of WC/Co composites using non-dominated sorting genetic algorithm (NSGA-II)
    The International Journal of Advanced Manufacturing Technology, 2007
49. An investigative study of delamination in drilling of medium density fibreboard (MDF) using response surface models
    The International Journal of Advanced Manufacturing Technology, 2007
50. Comparing statistical models and artificial neural networks on predicting the tool wear in hard machining D2 AISI steel
    The International Journal of Advanced Manufacturing Technology, 2007
51. FEM analysis in high speed machining of aluminium alloy (Al7075-0) using polycrystalline diamond (PCD) and cemented carbide (K10) cutting tools
    The International Journal of Advanced Manufacturing Technology, 2007
52. Artificial neural network based on genetic learning for machining of polyetheretherketone composite materials
    The International Journal of Advanced Manufacturing Technology, 2007
53. A comparative evaluation of the turning of reinforced and unreinforced polyamide
    The International Journal of Advanced Manufacturing Technology, vol. 33, no. 9-10, pp. 911–914, 2006
54. A decision-making framework model for material selection using a combined multiple attribute decision-making method
    The International Journal of Advanced Manufacturing Technology, vol. 35, no. 7-8, pp. 751–760, 2006
55. Evaluation of cutting quality of PMMA using CO2 lasers
    The International Journal of Advanced Manufacturing Technology, 2006
56. Drilling of hybrid aluminium matrix composites
    The International Journal of Advanced Manufacturing Technology, 2006
57. Multi-objective optimization of cutting parameters for drilling laminate composite materials by using genetic algorithms
    Composites Science and Technology, vol. 66, no. 15, pp. 3083–3088, 2006
58. Cutting performance of time-modulated chemical vapour deposited diamond coated tool inserts during machining graphite
    Diamond and Related Materials, vol. 15, no. 10, pp. 1753–1758, 2006
59. Physical cutting model of Polyetheretherketone composites
    Materials & Design, vol. 27, no. 10, pp. 847–852, 2006
60. Tribological behaviour of the composite PEEK-CF30 at dry sliding against steel using statistical techniques
    Materials & Design, vol. 27, no. 4, pp. 338–342, 2006
61. Friction and wear behaviour of ß-silicon nitride–steel couples under unlubricated conditions
    Materials Science and Technology, vol. 22, no. 2, pp. 247–252, 2006
62. The performance of cutting fluids when machining aluminium alloys
    Industrial Lubrication and Tribology, vol. 58, no. 5, pp. 260–268, 2006
63. Experimental studies on drilling of aluminium (AA1050) under dry, minimum quantity of lubricant, and flood-lubricated conditions
    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 220, no. 10, pp. 1605–1611, 2006
64. Laser cladding: an experimental study of geometric form and hardness of coating using statistical analysis
    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 220, no. 9, pp. 1549–1554, 2006
65. Thermo-mechanical model to predict the tribological behaviour of the composite PEEK-CF30/steel pair in dry sliding using multiple regression analysis
    Industrial Lubrication and Tribology, vol. 57, no. 5, pp. 181–186, 2005
66. Optimal machining parameters based on surface roughness experimental data and genetic search
    Industrial Lubrication and Tribology, vol. 57, no. 6, pp. 249–254, 2005
67. Influence of the chemical composition on the machinability of brasses
    Journal of Materials Processing Technology, vol. 170, no. 1-2, pp. 441–447, 2005
68. Wear behavior on advanced structural ceramics: ?-sialon matrix reinforced with ?-sialon fibers
    Materials & Design, vol. 26, no. 5, pp. 417–423, 2005
69. Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments
    Journal of Materials Processing Technology, vol. 160, no. 2, pp. 160–167, 2005
70. Hard turning: AISI 4340 high strength low alloy steel and AISI D2 cold work tool steel
    Journal of Materials Processing Technology, vol. 169, no. 3, pp. 388–395, 2005
71. A new machinability index in turning fiber reinforced plastics
    Journal of Materials Processing Technology, vol. 170, no. 1-2, pp. 436–440, 2005
72. Tribological behaviour of colloidally processed sialon ceramics sliding against steel under dry conditions
    Tribology Letters, vol. 18, no. 3, pp. 295–301, 2005
73. Machinability study on composite (polyetheretherketone reinforced with 30% glass fibre?PEEK GF 30) using polycrystalline diamond (PCD) and cemented carbide (K20) tools
    The International Journal of Advanced Manufacturing Technology, vol. 23, no. 5-6, pp. 412–418, 2004
74. Optimisation of surface roughness on turning fibre-reinforced plastics (FRPs) with diamond cutting tools
    The International Journal of Advanced Manufacturing Technology, vol. 26, no. 4, pp. 319–323, 2004
75. Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up
    Composites Science and Technology, vol. 64, no. 2, pp. 289–297, 2004
76. Dynamical experimental study of friction and wear behaviour of bovine cancellous bone sliding against a metallic counterface in a water lubricated environment
    Journal of Materials Processing Technology, vol. 152, no. 3, pp. 389–394, 2004
77. Drilling fiber reinforced plastics (FRPs) manufactured by hand lay-up: influence of matrix (Viapal VUP 9731 and ATLAC 382-05)
    Journal of Materials Processing Technology, vol. 155-156, pp. 1828–1833, 2004
78. A study on milling of glass fiber reinforced plastics manufactured by hand-lay up using statistical analysis (ANOVA)
    Composite Structures, vol. 64, no. 3-4, pp. 493–500, 2004
79. Dimensional precision and surface roughness on turning tubes in fibre reinforced plastics based on the design experiments
    International Journal of Materials and Product Technology, vol. 20, no. 4, p. 268, 2004
80. Multiple regression analysis (MRA) in modelling milling of glass fibre reinforced plastics (GFRP)
    International Journal of Manufacturing Technology and Management, vol. 6, no. 1/2, p. 185, 2004
81. Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis
    Industrial Lubrication and Tribology, vol. 56, no. 5, pp. 270–274, 2004
82. Machinability study on polyetheretherketone (PEEK) unreinforced and reinforced (GF30) for applications in structural components
    Composite Structures, vol. 62, no. 1, pp. 67–73, 2003
83. Design of optimisation of cutting parameters for turning metal matrix composites based on the orthogonal arrays
    Journal of Materials Processing Technology, vol. 132, no. 1-3, pp. 340–344, 2003
84. Drilling carbon fiber reinforced plastics manufactured by autoclave—experimental and statistical study
    Materials & Design, vol. 24, no. 5, pp. 315–324, 2003
85. Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments
    Composite Structures, vol. 59, no. 4, pp. 481–487, 2003
86. Study of drilling metal–matrix composites based on the Taguchi techniques
    Journal of Materials Processing Technology, vol. 132, no. 1-3, pp. 250–254, 2003
87. Diamond tool performance in machining metal–matrix composites
    Journal of Materials Processing Technology, vol. 128, no. 1-3, pp. 100–105, 2002
88. Optimal cutting conditions in turning of particulate metal matrix composites based on experiment and a genetic search model
    Composites Part A: Applied Science and Manufacturing, vol. 33, no. 2, pp. 213–219, 2002
89. Turning particulate metal matrix composites: experimental study of the evolution of the cutting forces, tool wear and workpiece surface roughness with the cutting time
    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 215, no. 3, pp. 371–376, 2001
90. Tribology Letters, vol. 11, no. 2, pp. 91–94, 2001
91. Optimisation of cutting conditions in machining of aluminium matrix composites using a numerical and experimental model
    Journal of Materials Processing Technology, vol. 112, no. 1, pp. 78–82, 2001
92. A note on the determination of optimal cutting conditions for surface finish obtained in turning using design of experiments
    Journal of Materials Processing Technology, vol. 116, no. 2-3, pp. 305–308, 2001
93. Optimal drilling of particulate metal matrix composites based on experimental and numerical procedures
    International Journal of Machine Tools and Manufacture, vol. 41, no. 1, pp. 21–31, 2001
94. Effect of carbon fibre reinforcement in the frictional behaviour of Peek in a water lubricated environment
    Wear, vol. 251, no. 1-12, pp. 1100–1104, 2001
95. Cutting force, tool wear and surface finish in drilling metal matrix composites
    Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 215, no. 2, pp. 177–183, 2001
96. Relationship between flexural strength and surface roughness for hot-pressed Si3N4 self-reinforced ceramics
    Journal of the European Ceramic Society, vol. 20, no. 9, pp. 1345–1353, 2000
97. An experimental study of the tribological behaviour of the brass/steel pair
    Journal of Materials Processing Technology, vol. 100, no. 1-3, pp. 273–277, 2000
98. Friction and adhesion behavior of polycrystalline diamond films deposited on metals
    Surface and Coatings Technology, vol. 126, no. 2-3, pp. 110–115, 2000
99. Relationship between cutting force and PCD cutting tool wear in machining silicon carbide reinforced aluminium
    Journal of Materials Processing Technology, vol. 103, no. 3, pp. 417–423, 2000