Personal Home Page

http://www.mec.hw.ac.uk/people/rl_reuben.htm

Articles in Scholarly Journals [Incomplete List]

1. Acoustic emission mapping of diesel engines for spatially located time series—Part II: Spatial reconstitution
   Mechanical Systems and Signal Processing, vol. 21, no. 2, pp. 1084–1102, 2007
2. Source location of acoustic emission in diesel engines
   Mechanical Systems and Signal Processing, vol. 21, no. 2, pp. 1103–1114, 2007
3. A study of the tribological behaviour of piston ring/cylinder liner interaction in diesel engines using acoustic emission
   Tribology International, vol. 39, no. 12, pp. 1634–1642, 2006
4. Development of a system for monitoring tool wear using artificial intelligence techniques
   Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 220, no. 8, pp. 1333–1346, 2006
5. Acoustic Emission Source Location for Steel Pipe and Pipeline Applications: The Role of Arrival Time Estimation
   Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 220, no. 2, pp. 121–133, 2006
6. On-line power estimation of large diesel engines using acoustic emission and instantaneous crankshaft angular velocity
   International Journal of Engine Research, vol. 7, no. 5, pp. 399–410, 2006
7. Recent developments in monitoring of engines using acoustic emission
   The Journal of Strain Analysis for Engineering Design, vol. 40, no. 1, pp. 45–57, 2005
8. The effects of progressive wear on the frequency characteristic of acoustic emission acquired during face milling
   Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 219, no. 11, pp. 803–810, 2005
9. Measurement of the mechanical characteristics of benign prostatic tissue: A Novel method for assessing benign prostatic disease
   Urology, vol. 65, no. 5, pp. 1024–1028, 2005
10. Measurement of tissue mechanical characteristics to distinguish between benign and malignant prostatic disease
    Urology, vol. 66, no. 2, pp. 447–450, 2005
11. Indirect measurement of cylinder pressure from diesel engines using acoustic emission
    Mechanical Systems and Signal Processing, vol. 19, no. 4, pp. 751–765, 2005
12. AE mapping of engines for spatially located time series
    Mechanical Systems and Signal Processing, vol. 19, no. 5, pp. 1034–1054, 2005
13. A new method for waveform analysis for estimating AE wave arrival times using wavelet decomposition
    NDT & E International, vol. 37, no. 4, pp. 279–290, 2004
14. Acoustic emission from the tension fatigue of glass fibre reinforced plastics
    Proceedings of the I MECH E Part L Journal of Materials:Design and Applications, vol. 218, no. 1, pp. 9–17, 2004
15. Embedded micromachined fiber-optic fabry-perot pressure sensors in aerodynamics applications
    IEEE Sensors Journal, vol. 3, no. 1, pp. 102–107, 2003
16. THE DEVELOPMENT OF AUTOMATED PATTERN RECOGNITION AND STATISTICAL FEATURE ISOLATION TECHNIQUES FOR THE DIAGNOSIS OF RECIPROCATING MACHINERY FAULTS USING ACOUSTIC EMISSION
    Mechanical Systems and Signal Processing, vol. 17, no. 4, pp. 805–823, 2003
17. Static Friction Modeling in the Presence of Soft Thin Metallic Films
    Journal of Tribology, vol. 124, no. 1, p. 27, 2002
18. The Effect of Film Thickness on Initial Friction of Elastic-Plastically Rough Surface With a Soft Thin Metallic Film
    Journal of Tribology, vol. 124, no. 3, p. 627, 2002
19. A Numerical Calculation of the Contact Area and Pressure of Real Surfaces in Sliding Wear
    Journal of Tribology, vol. 123, no. 1, p. 27, 2001
20. Tribology Letters, vol. 11, no. 3/4, pp. 161–169, 2001
21. THE ADAPTABILITY OF A TOOL WEAR MONITORING SYSTEM UNDER CHANGING CUTTING CONDITIONS
    Mechanical Systems and Signal Processing, vol. 14, no. 2, pp. 287–298, 2000
22. TOOL WEAR PREDICTION FROM ACOUSTIC EMISSION AND SURFACE CHARACTERISTICS VIA AN ARTIFICIAL NEURAL NETWORK
    Mechanical Systems and Signal Processing, vol. 13, no. 6, pp. 955–966, 1999
23. Experimental examination of bicycle chain forces
    Experimental Mechanics, vol. 39, no. 4, pp. 278–283, 1999
24. Tribology Letters, vol. 7, no. 4, pp. 183–197, 1999
25. Optical probing of acoustic emission from a rotating tool holder with a Sagnac interferometer
    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 213, no. 2, pp. 171–181, 1999
26. Journal of Materials Science, vol. 33, no. 19, pp. 4843–4855, 1998
27. Multistator LIGA-fabricated electrostatic wobble motors with integrated synchronous control
    Journal of Microelectromechanical Systems, vol. 7, no. 2, pp. 214–223, 1998
28. Advanced LIGA technology for the integration of an electrostatically controlled bearing in a wobble micromotor
    Journal of Microelectromechanical Systems, vol. 7, no. 4, pp. 423–427, 1998
29. TOOL WEAR MONITORING OF TURNING OPERATIONS BY NEURAL NETWORK AND EXPERT SYSTEM CLASSIFICATION OF A FEATURE SET GENERATED FROM MULTIPLE SENSORS
    Mechanical Systems and Signal Processing, vol. 12, no. 2, pp. 319–332, 1998
30. Plasma Polymer Films for Dropwise Condensation of Steam
    Chemical Vapor Deposition, vol. 3, no. 4, pp. 201–207, 1997
31. Surface finish parameters as diagnostics of tool wear in face milling
    Wear, vol. 205, no. 1-2, pp. 47–54, 1997
32. Surface features as indicators of tool chipping in single point face milling of aluminium
    Wear, vol. 212, no. 2, pp. 221–228, 1997
33. The use of cutting force and acoustic emission signals for the monitoring of tool insert geometry during rough face milling
    International Journal of Machine Tools and Manufacture, vol. 37, no. 4, pp. 481–494, 1997
34. Frictional study of micromotor bearings
    Sensors and Actuators A: Physical, vol. 63, no. 3, pp. 229–241, 1997
35. Detection of incipient cavitation in pumps using acoustic emission
    Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 211, no. 4, pp. 267–277, 1997
36. Acoustic emission monitoring of tool wear during the face milling of steels and aluminium alloys using a fibre optic sensor Part 1: energy analysis
    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 211, no. 4, pp. 299–309, 1997
37. Acoustic emission monitoring of tool wear during the face milling of steels and aluminium alloys using a fibre optic sensor Part 2: frequency analysis
    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 211, no. 4, pp. 311–319, 1997
38. Effect of progressive wear on the friction characteristics of nickel LIGA processed rotors
    Wear, vol. 192, no. 1-2, pp. 199–207, 1996
39. Mechanical behaviour of the metallic elements of submarine cables as a function of cable loading
    Engineering Structures, vol. 17, no. 4, pp. 240–253, 1995
40. Wear at microscopic scales and light loads for MEMS applications
    Wear, vol. 181-183, pp. 426–435, 1995
41. Journal of Micromechanics and Microengineering, vol. 5, no. 4, pp. 297–304, 1995
42. Coupled electrostatic and mechanical FEA of a micromotor
    Journal of Microelectromechanical Systems, vol. 3, no. 4, pp. 162–171, 1994
43. Journal of Micromechanics and Microengineering, vol. 4, no. 1, pp. 14–22, 1994
44. The detection of short time‐scale tool degradation events during face milling operations using cutting force and acoustic emission
    ARCHIVE: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 1989-1996 (vols 203-210), vol. 208, no. 32, pp. 205–215, 1994
45. Some internal mechanical aspects of flexible pipes, cables and umbilicals for marine applications
    Marine Structures, vol. 5, no. 5, pp. 387–398, 1992
46. The tensile deformation of a martensitic dual-phase steel
    Materials Science and Engineering, vol. 63, no. 2, pp. 229–238, 1984
47. Yield propagation in two-phase materials with particular reference to ferrite-pearlite structure
    Materials Science and Engineering, vol. 62, no. 1, pp. 93–98, 1984