Articles in Scholarly Journals [Incomplete List]

1. A basic approach for strain rate dependent energy conversion including heat transfer effects: An experimental and numerical study
   Journal of Materials Processing Technology, vol. 182, no. 1-3, pp. 319–326, 2007
2. Dynamic compaction of particulate composite materials
   Journal de Physique IV (Proceedings), vol. 134, no. 1, pp. 1251–1256, 2006
3. Experimental approach to shock synthesis using pressure-temperature-strain data
   Journal de Physique IV (Proceedings), vol. 134, no. 1, pp. 1161–1166, 2006
4. In situ purification, alloying and casting methodology for metallic plutonium
   Journal of Nuclear Materials, vol. 274, no. 3, pp. 315–319, 1999
5. Effect of grain size and pressure on twinning and microbanding in oblique shock loading of copper rods
   Acta Materialia, vol. 45, no. 8, pp. 3223–3235, 1997
6. Nuclear energy generation and waste transmutation using an accelerator-driven intense thermal neutron source
   Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 320, no. 1-2, pp. 336–367, 1992
7. Dynamic consolidation of cylinders by oblique shock loading
   Journal of Materials Science, vol. 25, no. 5, pp. 2287–2298, 1990
8. Shock-induced synthesis. I. Cubic boron nitride from ammonia borane
   Materials Letters, vol. 7, no. 1-2, pp. 44–46, 1988
9. Observation of crystallographic texture and J anisotropy in bulk shock-compacted YBaCuO powders
   Scripta Metallurgica, vol. 22, no. 10, pp. 1689–1693, 1988
10. First observations of microstructural changes in delta Pu by transmission electron microscopy
    Journal of Nuclear Materials, vol. 144, no. 1-2, pp. 202–204, 1987
11. Comparison of residual microstructures for 304 stainless steel shock loaded in plane and cylindrical geometries: Implications for dynamic compaction and forming
    Acta Metallurgica, vol. 33, no. 4, pp. 677–684, 1985
12. Biaxial deformation of 70-30 brass: Flow behaviors, texture, microstructures
    Metallurgical Transactions A, vol. 15, no. 8, pp. 1607–1612, 1984
13. Nucleation and evolution of strain-induced martensitic (b.c.c.) embryos and substructure in stainless steel: A transmission electron microscope study
    Acta Metallurgica, vol. 31, no. 2, pp. 267–274, 1983
14. Explosive consolidation of an amorphous iron-base powder
    Scripta Metallurgica, vol. 17, no. 11, pp. 1353–1357, 1983
15. Analytical electron microscopy techniques for track-plated Au-Cu alloy
    Thin Solid Films, vol. 108, no. 1, pp. 61–67, 1983
16. a1-Martensite morphology in shock-loaded type 304 stainless steel
    Scripta Metallurgica, vol. 16, no. 6, pp. 713–716, 1982
17. Effects of Strain State and Strain Rate on Deformation-Induced Transformation in 304 Stainless Steel: Part II. Microstructural Study
    Metallurgical Transactions A, vol. 13, no. 4, pp. 627–635, 1982
18. Effects of Strain State and Strain Rate on Deformation-Induced Transformation in 304 Stainless Steel: Part I. Magnetic Measurements and Mechanical Behavior
    Metallurgical Transactions A, vol. 13, no. 4, pp. 619–626, 1982
19. The effect of prior deformation on the residual microstructure of explosively deformed stainless steels
    Materials Science and Engineering, vol. 44, no. 1, pp. 97–113, 1980
20. Effect of peak pressure and pressure-pulse duration on crystallographic transformations in shock-loaded metals and alloys
    Scripta Metallurgica, vol. 12, no. 5, pp. 425–429, 1978
21. The contribution of deformation twins to yield stress: The Hall-Petch law for inter-twin spacing
    Scripta Metallurgica, vol. 12, no. 11, pp. 1031–1035, 1978
22. An electron microscope study of coarse M23C6 phase regions in a two-phase alloy steel
    Scripta Metallurgica, vol. 9, no. 3, pp. 331–338, 1975
23. Effect of stress amplitude and stress duration on twinning and phase transformations in shock-loaded and cold-rolled 304 stainless steel
    Materials Science and Engineering, vol. 20, pp. 35–46, 1975
24. Characterization of natural pyrolusite by electron microscopy
    Contributions to Mineralogy and Petrology, vol. 45, no. 3, pp. 251–256, 1974