Ever Barbero

Articles in Scholarly Journals [Incomplete List]

  1. Finite element continuum damage modeling of plain weave reinforced composites
    Composites Part B: Engineering, vol. 37, no. 2-3, pp. 137–147, 2006
  2. Finite element modeling of plain weave fabrics from photomicrograph measurements
    Composite Structures, vol. 73, no. 1, pp. 41–52, 2006
  3. Post-Yielding Stress-Strain Determination Using Spherical Indentation
    Mechanics of Advanced Materials and Structures, vol. 13, no. 2, pp. 129–138, 2006
  4. Continuum Damage-healing Mechanics with Application to Self-healing Composites
    International Journal of Damage Mechanics, vol. 14, no. 1, pp. 51–81, 2005
  5. Effect of Sn concentration on the corrosion resistance of Pb-Sn alloys in HSO solution
    Journal of Power Sources, 2005
  6. Compression after impact of thin composite laminates
    Composites Science and Technology, vol. 65, no. 13, pp. 1911–1919, 2005
  7. Damage in CFRPs due to low velocity impact at low temperature
    Composites Part B: Engineering, vol. 36, no. 1, pp. 41–50, 2005
  8. A micromechanics approach for damage modeling of polymer matrix composites
    Composite Structures, vol. 67, no. 4, pp. 427–436, 2005
  9. Micromechanics of fabric reinforced composites with periodic microstructure
    International Journal of Solids and Structures, vol. 42, no. 9-10, pp. 2489–2504, 2005
  10. Thermodynamic assessment of liquid composition change during solidification and its effect on freckle formation in superalloys
    Materials Science and Engineering A, vol. 386, no. 1-2, pp. 254–261, 2004
  11. Equivalent Time Temperature Model for Physical Aging and Temperature Effects on Polymer Creep and Relaxation
    Journal of Engineering Materials and Technology, vol. 126, no. 4, p. 413, 2004
  12. Investigation of the crack growth behavior of Inconel 718 by high temperature Moiré interferometry
    Journal of Materials Science, vol. 39, no. 6, pp. 1967–1973, 2004
  13. Interlaminar Damage Model for Polymer Matrix Composites
    Journal of Composite Materials, vol. 38, no. 9, pp. 799–800, 2004
  14. Time-Temperature-Age Viscoelastic Behavior of Commercial Polymer Blends and Felt Filled Polymers
    Mechanics of Advanced Materials and Structures, vol. 11, no. 3, pp. 287–300, 2004
  15. Phenomenological Prediction of Tensile Strength of E-Glass Composites from Available Aging and Stress Corrosion Data
    Journal of Reinforced Plastics and Composites, vol. 22, no. 4, pp. 373–394, 2003
  16. Interlaminar Damage Model for Polymer Matrix Composites
    Journal of Composite Materials, vol. 37, no. 16, pp. 1485–1504, 2003
  17. Interaction between Static Fatigue and Zero-Stress Aging in E-glass Fiber Composites
    Journal of Composites for Construction, vol. 7, no. 1, p. 3, 2003
  18. An Inelastic Damage Model for Fiber Reinforced Laminates
    Journal of Composite Materials, vol. 36, no. 8, pp. 941–962, 2002
  19. Static behavior of CFRPs at low temperatures
    Composites Part B: Engineering, vol. 33, no. 5, pp. 383–390, 2002
  20. A micro-mechanics damage approach for fatigue of composite materials
    Composite Structures, vol. 56, no. 4, pp. 413–422, 2002
  21. Journal of Materials Science Letters, vol. 20, no. 9, pp. 847–849, 2001
  22. A Constitutive Model for Elastic Damage in Fiber-Reinforced PMC Laminae
    International Journal of Damage Mechanics, vol. 10, no. 1, pp. 73–93, 2001
  23. Damage Model for Composites Defined in Terms of Available Data
    Mechanics of Composite Materials and Structures, vol. 8, no. 4, pp. 299–315, 2001
  24. Statistical analysis of the mechanical properties of composite materials
    Composites Part B: Engineering, vol. 31, no. 5, pp. 375–381, 2000
  25. Prediction of Buckling-Mode Interaction in Composite Columns
    Mechanics of Composite Materials and Structures, vol. 7, no. 3, pp. 269–284, 2000
  26. Experimental verification of buckling-mode interaction in intermediate-length composite columns
    International Journal of Solids and Structures, vol. 37, no. 29, pp. 3919–3934, 2000
  27. Experimental Investigation of Beam-Column Behavior of Pultruded Structural Shapes
    Journal of Reinforced Plastics and Composites, vol. 19, no. 3, pp. 249–265, 2000
  28. On the Linear Viscoelasticity of Thin-Walled Laminated Composite Beams
    Journal of Composite Materials, vol. 34, no. 1, pp. 39–68, 2000
  29. Experimental determination of the compressive strength of pultruded structural shapes
    Composites Science and Technology, vol. 59, no. 13, pp. 2047–2054, 1999
  30. Beam-Column Design Equations for Wide-Flange Pultruded Structural Shapes
    Journal of Composites for Construction, vol. 3, no. 4, p. 185, 1999
  31. Journal of Materials Science Letters, vol. 18, no. 17, pp. 1441–1443, 1999
  32. Prediction and measurement of the post-critical behavior of fiber-reinforced composite columns
    Composites Science and Technology, vol. 58, no. 8, pp. 1335–1341, 1998
  33. Imperfection sensitivity of fiber micro-buckling in elastic-nonlinear polymer-matrix composites
    International Journal of Solids and Structures, vol. 34, no. 13, pp. 1667–1679, 1997
  34. INFLUENCE OF BENDING-EXTENSION COUPLING ON BUCKLING OF COMPOSITE COLUMNS
    Mechanics of Advanced Materials and Structures, vol. 4, no. 3, pp. 191–207, 1997
  35. Delamination buckling of FRP layer in laminated wood beams
    Composite Structures, vol. 37, no. 3-4, pp. 311–320, 1997
  36. A damage mechanics model for compression strength of composites
    International Journal of Solids and Structures, vol. 33, no. 29, pp. 4379–4393, 1996
  37. Multiobjective material architecture optimization of pultruded FRP I-beams
    Composite Structures, vol. 35, no. 3, pp. 271–281, 1996
  38. Analysis and design of pultruded FRP shapes under bending
    Composites Part B: Engineering, vol. 27, no. 3-4, pp. 295–305, 1996
  39. FINITE ELEMENTS FOR THREE-MODE INTERACTION IN BUCKLING ANALYSIS
    International Journal for Numerical Methods in Engineering, vol. 39, no. 3, pp. 469–488, 1996
  40. Micromechanical formulas for the relaxation tensor of linear viscoelastic composites with transversely isotropic fibers
    International Journal of Solids and Structures, vol. 32, no. 13, pp. 1859–1872, 1995
  41. Total Lagrangian formulation for laminated composite plates analysed by three-dimensional finite elements with two-dimensional kinematic constraints
    Computers & Structures, vol. 57, no. 3, pp. 455–466, 1995
  42. Finite elements for post-buckling analysis. II—Application to composite plate assemblies
    Computers & Structures, vol. 56, no. 6, pp. 1019–1028, 1995
  43. Three-dimensional plate and contact/friction elements for laminated composite joints
    Computers & Structures, vol. 54, no. 4, pp. 689–703, 1995
  44. Finite elements for post-buckling analysis. I—The W-formulation
    Computers & Structures, vol. 56, no. 6, pp. 1009–1017, 1995
  45. Lateral and distortional buckling of pultruded I-beams
    Composite Structures, vol. 27, no. 3, pp. 261–268, 1994
  46. A phenomenological design equation for FRP columns with interaction between local and global buckling
    Thin-Walled Structures, vol. 18, no. 2, pp. 117–131, 1994
  47. Local buckling experiments on FRP columns
    Thin-Walled Structures, vol. 18, no. 2, pp. 97–116, 1994
  48. A three-dimensional layer-wise constant shear element for general anisotropic shell-type structures
    International Journal for Numerical Methods in Engineering, vol. 37, no. 14, pp. 2445–2470, 1994
  49. Formulas for the stiffness of composites with periodic microstructure
    International Journal of Solids and Structures, vol. 31, no. 21, pp. 2933–2944, 1994
  50. Analysis of laminated beams with a layer-wise constant shear theory
    Composite Structures, vol. 28, no. 3, pp. 241–253, 1994
  51. Composite Beam Element with Layerwise Plane Sections
    Journal of Engineering Mechanics, vol. 120, no. 5, p. 1160, 1994
  52. Bond Strength of FRP-Wood Interface
    Journal of Reinforced Plastics and Composites, vol. 13, no. 9, pp. 835–854, 1994
  53. Local Buckling of FRP Beams and Columns
    Journal of Materials in Civil Engineering, vol. 5, no. 3, p. 339, 1993
  54. Predicting High Temperature Ultimate Strength of Continuous Fiber Metal Matrix Composites
    Journal of Composite Materials, vol. 27, no. 12, pp. 1214–1235, 1993
  55. On the Mechanics of Thin-Walled Laminated Composite Beams
    Journal of Composite Materials, vol. 27, no. 8, pp. 806–829, 1993
  56. The effect of fiber damage on the longitudinal creep of a CFMMC
    International Journal of Solids and Structures, vol. 30, no. 24, pp. 3417–3429, 1993
  57. Finite element vibration analysis of a helically wound tubular and laminated composite material beam
    Computers & Structures, vol. 49, no. 3, pp. 399–410, 1993
  58. Euler buckling of thin-walled composite columns
    Thin-Walled Structures, vol. 17, no. 4, pp. 237–258, 1993
  59. Euler buckling of pultruted composite columns
    Composite Structures, vol. 24, no. 2, pp. 139–147, 1993
  60. A 3-D finite element for laminated composites with 2-D kinematic constraints
    Computers & Structures, vol. 45, no. 2, pp. 263–271, 1992
  61. On load interaction in the non linear buckling analysis of cylindrical shells
    Advances in Engineering Software and Workstations, vol. 13, no. 1, pp. 46–50, 1991
  62. The Jacobian derivative method for three-dimensional fracture mechanics
    Communications in Applied Numerical Methods, vol. 6, no. 7, pp. 507–518, 1990
  63. Fracture analysis of a surface-coated ceramic by speckle photography and finite elements
    Optics & Laser Technology, vol. 22, no. 1, pp. 17–22, 1990
  64. An accurate determination of stresses in thick laminates using a generalized plate theory
    International Journal for Numerical Methods in Engineering, vol. 29, no. 1, pp. 1–14, 1990
  65. A plate bending element based on a generalized laminate plate theory
    International Journal for Numerical Methods in Engineering, vol. 28, no. 10, pp. 2275–2292, 1989