Claude Esling

Articles in Scholarly Journals [Incomplete List]

  1. French-German Texture and Anisotropy Meeting
    Texture, Stress, and Microstructure, vol. 2008, Article ID 124056, 2 pages, 2008
  2. Effect of a High Magnetic Field on Eutectoid Point Shift and Texture Evolution in 0.81C-Fe Steel
    Texture, Stress, and Microstructure, vol. 2008, Article ID 349854, 6 pages, 2008
  3. Experiment and theoretical prediction of martensitic transformation crystallography in a Ni–Mn–Ga ferromagnetic shape memory alloy
    Acta Materialia, vol. 55, no. 14, pp. 4731–4740, 2007
  4. Deformed texture of copper processed by equal channel angular pressing via different angle routes
    Transactions of Nonferrous Metals Society of China, vol. 17, no. 3, pp. 479–485, 2007
  5. Indirect two-trace method to determine a faceted low-energy interface between two crystallographically correlated crystals
    Journal of Applied Crystallography, vol. 40, no. 3, pp. 436–440, 2007
  6. New insights into crystallographic correlations between ferrite and cementite in lamellar eutectoid structures, obtained by SEM–FEG/EBSD and an indirect two-trace method
    Journal of Applied Crystallography, vol. 40, no. 5, pp. 849–856, 2007
  7. Microstructural features induced by a high magnetic field in a hypereutectoid steel during austenitic decomposition
    Scripta Materialia, vol. 54, no. 11, pp. 1897–1900, 2006
  8. Paramagnetic susceptibility of ferrite and cementite obtained from ab initio calculations
    Journal of Magnetism and Magnetic Materials, vol. 299, no. 1, pp. 64–69, 2006
  9. Study of stability of twist grain boundaries in hcp zinc
    Scripta Materialia, vol. 54, no. 5, pp. 865–868, 2006
  10. Crystalline, electronic, and magnetic structures of ?-Fe[sub 3]C, ?-Fe[sub 5]C[sub 2], and ?-Fe[sub 2]C from first principle calculation
    Journal of Applied Physics, vol. 99, no. 9, p. 093508, 2006
  11. Low Temperature Tempering of a Medium Carbon Steel in High Magnetic Field
    ISIJ International, vol. 45, no. 6, pp. 913–917, 2005
  12. Experimental and simulation textures in an asymmetrically skin-passed zinc galvanized sheet
    Scripta Materialia, vol. 53, no. 6, pp. 775–779, 2005
  13. Elastic properties of binary NiAl, NiCr and AlCr and ternary NiAlCr alloys from molecular dynamic and Abinitio simulation
    Computational Materials Science, vol. 33, no. 1-3, pp. 184–191, 2005
  14. Grain boundary characteristics and texture formation in a medium carbon steel during its austenitic decomposition in a high magnetic field
    Acta Materialia, vol. 53, no. 19, pp. 5213–5221, 2005
  15. Thermodynamic and kinetic characteristics of the austenite-to-ferrite transformation under high magnetic field in medium carbon steel
    Journal of Magnetism and Magnetic Materials, vol. 294, no. 3, pp. 267–272, 2005
  16. The effects of thermal processing in a magnetic field on grain boundary characters of ferrite in a medium carbon steel
    Journal of Materials Science, vol. 40, no. 4, pp. 903–908, 2005
  17. Some theoretical and computational aspects in grain boundaries and triple lines
    Journal of Materials Science, vol. 40, no. 4, pp. 841–845, 2005
  18. A New Approach for Rapid Annealing of Medium Carbon Steels
    Advanced Engineering Materials, vol. 6, no. 5, pp. 310–313, 2004
  19. New microstructural features occurring during transformation from austenite to ferrite under the kinetic influence of magnetic field in a medium carbon steel
    Journal of Magnetism and Magnetic Materials, vol. 284, pp. 287–293, 2004
  20. Experimental and simulation textures in an asymmetrically rolled zinc alloy sheet
    Scripta Materialia, vol. 50, no. 7, pp. 1011–1015, 2004
  21. High temperature tempering behaviors in a structural steel under high magnetic field
    Acta Materialia, vol. 52, no. 12, pp. 3467–3474, 2004
  22. Electronic structure of Ti2CAl and Ti2NAl
    Materials Science and Engineering: B, vol. 110, no. 3, pp. 280–284, 2004
  23. Microstructure, texture, grain boundaries in recrystallization regions in pure Cu ECAE samples
    Materials Science and Engineering A, vol. 346, no. 1-2, pp. 83–90, 2003
  24. EBSD Study of the? toa Phase Transormation in an CSP–HSLA Steel
    Advanced Engineering Materials, vol. 5, no. 8, pp. 583–586, 2003
  25. Microstructural Characteristics by EBSD and ECC in ECAE Processed Pure Cu Samples
    Advanced Engineering Materials, vol. 5, no. 8, pp. 593–597, 2003
  26. Effects of a High Magnetic Field on Microstructure and Texture Evolution in a Cold-rolled Interstitial-Free (IF) Steel Sheet during Annealing
    Advanced Engineering Materials, vol. 5, no. 8, pp. 579–583, 2003
  27. Texture and microstructure development in cold-rolled interstitial free (IF) steel sheet during electric field annealing
    Scripta Materialia, vol. 48, no. 6, pp. 737–742, 2003
  28. Computer simulation on the tendency of intergranular fracture in textured polycrystalline materials
    Philosophical Magazine A, vol. 82, no. 12, pp. 2499–2510, 2002
  29. Modelling of the variant selection mechanism in the phase transformation of HSLA steel produced by compact strip production
    Acta Materialia, vol. 50, no. 7, pp. 1741–1747, 2002
  30. Restitution of high temperature parent textures of bcc and hcp polycrystals by a non-linear positivity method
    Acta Materialia, vol. 49, no. 3, pp. 445–451, 2001
  31. Determination and prediction of the inherited ferrite texture in a HSLA steel produced by compact strip production
    Materials Science and Engineering A, vol. 303, no. 1-2, pp. 60–69, 2001
  32. A non-linear positive method to reconstruct the parent textures from the inherited textures in phase transformation
    Journal of Applied Crystallography, vol. 33, no. 2, pp. 206–212, 2000
  33. Addition elements and texture gradients in rolled zinc alloys
    Scripta Materialia, vol. 40, no. 11, pp. 1295–1303, 1999
  34. Texture gradient in rolled zinc sheets
    Scripta Materialia, vol. 39, no. 11, pp. 1623–1630, 1998
  35. Development of the recrystallization texture in copper heated by laser beam
    Scripta Materialia, vol. 40, no. 1, pp. 13–17, 1998
  36. Modelling and prediction of mechanical properties for materials with hexagonal symmetry (zinc, titanium and zirconium alloys)
    Acta Materialia, vol. 45, no. 10, pp. 4041–4055, 1997
  37. Determination of a Mean Orientation from a Cloud of Orientations. Application to Electron Back-Scattering Pattern Measurements
    Journal of Applied Crystallography, vol. 29, no. 6, pp. 662–666, 1996
  38. A criterion for determining the nearest-neighbour relation between two joining crystals
    Philosophical Magazine Letters, vol. 73, no. 1, pp. 1–4, 1996
  39. Comment on the estimation of CSL grain boundary distribution in random polycrystal
    Scripta Metallurgica et Materialia, vol. 32, no. 6, pp. 937–939, 1995
  40. Modelling of texture evolution for materials of hexagonal symmetry—I. Application to zinc alloys
    Acta Metallurgica et Materialia, vol. 42, no. 1, pp. 239–250, 1994
  41. Evalution of volume fractions of fiber-type texture components
    Journal of Applied Crystallography, vol. 27, no. 3, pp. 358–361, 1994
  42. An effective algorithm for calculation of the Clebsch–Gordan coefficients
    Journal of Applied Crystallography, vol. 26, no. 2, pp. 302–304, 1993
  43. Volume fractions of texture components in polycrystalline materials
    Journal of Applied Crystallography, vol. 26, no. 3, pp. 422–425, 1993
  44. Microstructures and hardness of ultrafine-grained Ni3Al
    Acta Metallurgica et Materialia, vol. 41, no. 10, pp. 2953–2962, 1993
  45. Elastic properties of polycrystals in the Voigt-Reuss-Hill approximation
    Journal of Applied Crystallography, vol. 25, no. 6, pp. 751–755, 1992
  46. Numbering the crystallographic variants in phase transformation
    Journal of Applied Crystallography, vol. 25, no. 6, pp. 724–730, 1992
  47. Texture development by plastic deformation
    Scripta Metallurgica, vol. 18, no. 3, pp. 191–195, 1984
  48. Development of preferred orientation in plane strain deformed limestone: Experiment and theory
    Contributions to Mineralogy and Petrology, vol. 80, no. 2, pp. 132–139, 1982
  49. Reproducible Textures
    Textures and Microstructures, vol. 5, no. 2, pp. 87–94, 1982
  50. Three-Dimensional Texture Analysis After Bunge and Roe: Correspondence Between the Respective Mathematical Techniques
    Textures and Microstructures, vol. 5, no. 2, pp. 95–125, 1982
  51. Numerical calculation of the odd part of the texture function
    Journal de Physique Lettres, vol. 42, no. 6, pp. 141–144, 1981
  52. Importance of odd coefficients in texture calculations for trigonal–triclinic symmetries
    Physica Status Solidi (a), vol. 67, no. 1, pp. 269–285, 1981
  53. Texture representation of deformed dolomite rocks
    Tectonophysics, vol. 78, no. 1-4, pp. 119–138, 1981
  54. An inversion formula expressing the texture function in terms of angular distribution functions
    Journal de Physique, vol. 42, no. 2, pp. 161–165, 1981
  55. Description of the texture by distribution functions on the space of orthogonal transformations. Implications on the inversion centre
    Journal de Physique Lettres, vol. 41, no. 22, pp. 543–545, 1980
  56. Determination of the odd part of the texture function
    Journal de Physique Lettres, vol. 40, no. 23, pp. 627–628, 1979