John Mecholsky

Personal Home Page

http://mecholsky.mse.ufl.edu/

Articles in Scholarly Journals [Incomplete List]

  1. Quantitative fractography for estimating whole bone properties of manatee rib bones
    Journal of Materials Science, vol. 43, no. 6, pp. 2026–2034, 2008
  2. The effects of viscoelastic parameters on residual stress development in a zirconia/glass bilayer dental ceramic
    Dental Materials, 2008
  3. Analysis of subcritical crack growth in dental ceramics using fracture mechanics and fractography
    Dental Materials, vol. 24, no. 5, pp. 700–707, 2008
  4. Fractographic analyses of zirconia-based fixed partial dentures
    Dental Materials, 2008
  5. Evaluation of fracture toughness of human dentin using elastic–plastic fracture mechanics
    Journal of Biomechanics, vol. 41, no. 6, pp. 1253–1259, 2008
  6. Material properties of manatee rib bone
    Journal of Zoology, vol. 274, no. 2, pp. 150–159, 2008
  7. Analysis of macroscopic crack branching patterns in chemically strengthened glass
    Journal of Materials Research, vol. 23, no. 1, pp. 214–225, 2008
  8. Fracture mechanics analysis of crack shapes due to cyclic loading in baria–silicate glass
    Journal of Materials Research, vol. 22, no. 12, pp. 3415–3422, 2007
  9. Effect of temperature on the fracture toughness of compact bone
    Journal of Biomechanics, vol. 40, no. 7, pp. 1641–1645, 2007
  10. How tough is bone? Application of elastic–plastic fracture mechanics to bone
    Bone, vol. 40, no. 2, pp. 479–484, 2007
  11. Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia-reinforced ceramic
    Dental Materials, vol. 23, no. 6, pp. 769–775, 2007
  12. Fracture toughness of manatee rib and bovine femur using a chevron-notched beam test
    Journal of Biomechanics, vol. 39, no. 6, pp. 1066–1074, 2006
  13. Application of Fracture Mechanics to Failure in Manatee Rib Bone
    Journal of Biomechanical Engineering, vol. 128, no. 3, p. 281, 2006
  14. Estimating theoretical strength of brittle materials using fractal geometry
    Materials Letters, vol. 60, no. 20, pp. 2485–2488, 2006
  15. Residual stresses in bilayer dental ceramics
    Biomaterials, vol. 26, no. 16, pp. 3235–3241, 2005
  16. Strength and toughness of tape cast bioactive glass 45S5 following heat treatment
    Journal of the European Ceramic Society, vol. 24, no. 10-11, pp. 2929–2934, 2004
  17. Role of investment interaction layer on strength and toughness of ceramic laminates
    Dental Materials, vol. 20, no. 8, pp. 701–708, 2004
  18. Fracture behavior of lithia disilicate- and leucite-based ceramics
    Dental Materials, vol. 20, no. 10, pp. 956–962, 2004
  19. Failure analysis of resin composite bonded to ceramic
    Dental Materials, vol. 19, no. 8, pp. 693–699, 2003
  20. The effect of stoichiometry on the fracture toughness of a liquid crystalline epoxy
    Polymer Engineering & Science, vol. 42, no. 2, pp. 269–279, 2002
  21. Fractal dimension as a characterization of free volume created during fracture in brittle materials
    Philosophical Magazine A, vol. 82, no. 17, pp. 3163–3176, 2002
  22. Bioactivity of tape cast and sintered bioactive glass-ceramic in simulated body fluid
    Biomaterials, vol. 23, no. 12, pp. 2599–2606, 2002
  23. Sintering temperature effects on the in vitro bioactive response of tape cast and sintered bioactive glass-ceramic in Tris buffer
    Journal of Biomedical Materials Research, vol. 57, no. 4, pp. 532–540, 2001
  24. Journal of Materials Science Letters, vol. 20, no. 20, pp. 1885–1888, 2001
  25. Journal of Materials Science, vol. 36, no. 11, pp. 2651–2657, 2001
  26. Journal of Materials Science Letters, vol. 20, no. 10, pp. 959–960, 2001
  27. Journal of Materials Science, vol. 36, no. 11, pp. 2645–2650, 2001
  28. Luminescent a-diimine complexes of ruthenium(II) containing scorpionate ligands
    Inorganica Chimica Acta, vol. 310, no. 2, pp. 227–236, 2000
  29. All-steel and Si3N4-steel hybrid rolling contact fatigue under contaminated conditions
    Wear, vol. 239, no. 2, pp. 176–188, 2000
  30. Langmuir, vol. 15, no. 13, pp. 4328–4334, 1999
  31. The application of fractal and quantum geometry to brittle fracture
    Journal of Non-Crystalline Solids, vol. 260, no. 1-2, pp. 99–108, 1999
  32. Determination of fracture toughness of epoxy using fractography
    Journal of Applied Polymer Science, vol. 72, no. 2, pp. 257–268, 1999
  33. Recent developments in the preparation and properties of nanometer-size spherical and platelet-shaped particles and composite particles
    Materials Science and Engineering: R: Reports, vol. 23, no. 4-5, pp. 139–242, 1998
  34. On the fractal nature of crack branching in MgF
    Journal of Materials Research, vol. 13, no. 11, Article ID 1998.0429, 6 pages, 1998
  35. Journal of Materials Science, vol. 32, no. 23, pp. 6317–6323, 1997
  36. Stress analysis of brittle spheres under multiaxial loading
    Powder Technology, vol. 94, no. 2, pp. 153–161, 1997
  37. Damage processes in Si3N4 bearing material under contact loading
    Wear, vol. 198, no. 1-2, pp. 197–207, 1996
  38. Hardness and toughness of exoskeleton material in the stone crab,
    Journal of Materials Research, vol. 11, no. 11, Article ID 1996.0367, 4 pages, 1996
  39. Effect of interface design on high-temperature failure of laminated composites
    Journal of Materials Research, vol. 11, no. 8, Article ID 1996.0256, 6 pages, 1996
  40. Measurement of residual stresses in Al2O3/Ni laminated composites using an X-ray diffraction technique
    Journal of Materials Science, vol. 30, no. 5, pp. 1277–1282, 1995
  41. Fractography: Determining the sites of fracture initiation
    Dental Materials, vol. 11, no. 2, pp. 113–116, 1995
  42. Fracture mechanics principles
    Dental Materials, vol. 11, no. 2, pp. 111–112, 1995
  43. Effect of Micmcracking on the Fracture Toughness and Fracture Surface Fractal Dimension of Lithia-Based Glass-Ceramics
    Journal of the American Ceramic Society, vol. 78, no. 11, pp. 3045–3049, 1995
  44. Fracture surface analysis of free-standing diamond films
    Journal of Materials Research, vol. 9, no. 6, Article ID 1994.1540, 5 pages, 1994
  45. A measure theoretic derivation of Richardson's equation
    Materials Science and Engineering A, vol. 186, no. 1-2, pp. L5–L6, 1994
  46. Damage-tolerant laminated composites in thermal shock
    Journal of Materials Science, vol. 28, no. 23, pp. 6365–6370, 1993
  47. Control of strength and toughness of ceramic/metal laminates using interface design
    Journal of Materials Research, vol. 8, no. 9, Article ID 1993.2362, 7 pages, 1993
  48. Elasticity, plasticity and cracking at indentations in single-crystal silicon
    Journal of Materials Science Letters, vol. 12, no. 16, pp. 1274–1275, 1993
  49. Fracture studies of diamond films on silicon
    Journal of Applied Physics, vol. 71, no. 10, p. 4875, 1992
  50. Fractal analysis on fracture surfaces of glass using replication techniques
    Journal of Non-Crystalline Solids, vol. 146, pp. 249–255, 1992
  51. Fracture mechanics description of fracture mirror formation in single crystals
    International Journal of Fracture, vol. 57, no. 2, pp. 167–182, 1992
  52. Fracture behavior of metal particulate-reinforced WCCo composites1
    Materials Science and Engineering A, vol. 144, no. 1-2, pp. 293–302, 1991
  53. Fractal fracture of single crystal silicon
    Journal of Materials Research, vol. 6, no. 6, Article ID 1991.1248, 15 pages, 1991
  54. Fracture toughness of macro-defect-free cement using small crack techniques
    Journal of Materials Research, vol. 5, no. 8, Article ID 1990.1774, 6 pages, 1990
  55. Indentation fracture of lead magnesium niobate-based multilayer composite structures
    Journal of Materials Research, vol. 5, no. 3, Article ID 1990.0515, 8 pages, 1990
  56. Fracture analysis of cobalt-bonded tungsten carbide composites
    Journal of Materials Science, vol. 25, no. 12, pp. 4949–4956, 1990
  57. Viscoelastic Effect of Heat Treatment on the Fracture Toughness of Metal-Particulate/Glass-Matrix Composites
    Journal of the American Ceramic Society, vol. 72, no. 11, pp. 2094–2097, 1989
  58. Effects of Sodium Silicate Exposure at High Temperature on Sintered alpha-Silicon Carbide and Siliconized Silicon Carbide
    Journal of the American Ceramic Society, vol. 72, no. 9, pp. 1628–1635, 1989
  59. Use of Crack Branching Data for Measuring Near-Surface Residual Stresses in Tempered Glass
    Journal of the American Ceramic Society, vol. 72, no. 9, pp. 1584–1587, 1989
  60. Quantitative Analysis of Brittle Fracture Surfaces Using Fractal Geometry
    Journal of the American Ceramic Society, vol. 72, no. 1, pp. 60–65, 1989
  61. Fractal analysis of fracture in Ocala chert
    Journal of Materials Science Letters, vol. 7, no. 11, pp. 1145–1147, 1988
  62. Structural Changes in Stressed As2S3 Glass Fibers Determined by Raman Spectroscopy
    Journal of the American Ceramic Society, vol. 70, no. 8, pp. 561–564, 1987
  63. Intergranular Slow Crack Growth in MgF2
    Journal of the American Ceramic Society, vol. 64, no. 9, pp. 563–566, 1981
  64. The effect of grinding direction on flaw character and strength of single crystal and polycrystalline ceramics
    Journal of Materials Science, vol. 16, no. 4, pp. 853–862, 1981
  65. The Dependence of Strength-Controlling Fracture Energy on the Flaw-Size to Grain-Size Ratio
    Journal of the American Ceramic Society, vol. 63, no. 3-4, pp. 129–136, 1980
  66. Fracture of ceramics by single-pulse 10.6-µm irradiation
    Journal of Applied Physics, vol. 50, no. 8, p. 5488, 1979
  67. Enhanced failure of ceramics irradiated by combined pulse and c.w. lasers
    Journal of Materials Science, vol. 14, no. 1, pp. 175–178, 1979
  68. Fractographic Analysis of Delayed Failure in Soda-Lime Glass
    Journal of the American Ceramic Society, vol. 62, no. 11-12, pp. 577–580, 1979
  69. Mixed-Mode Fracture in Soda-Lime Glass
    Journal of the American Ceramic Society, vol. 62, no. 3-4, pp. 206–208, 1979
  70. Effect of temperature and environment on crack propagation in graphite
    Journal of Materials Science, vol. 13, no. 6, pp. 1249–1260, 1978
  71. Fracture surface analysis of ceramics
    Journal of Materials Science, vol. 11, no. 7, pp. 1310–1319, 1976
  72. Effect of sputtering on the strength of silicate glasses
    Journal of Applied Physics, vol. 47, no. 7, p. 2972, 1976
  73. Influence of Microstructure on Crack Propagation in ZnSe
    Journal of the American Ceramic Society, vol. 58, no. 9-10, pp. 406–409, 1975
  74. Prediction of Fracture Energy and Flaw Size in Glasses from Measurements of Mirror Size
    Journal of the American Ceramic Society, vol. 57, no. 10, pp. 440–443, 1974