Articles in Scholarly Journals [Incomplete List]

1. French-German Texture and Anisotropy Meeting
   Texture, Stress, and Microstructure, vol. 2008, Article ID 124056, 2 pages, 2008
2. Microstructural and textural characterization of copper processed by ECAE
   Materials Characterization, vol. 56, no. 1, pp. 19–25, 2006
3. EBSD study of hydrogen-induced cracking in API-5L-X46 pipeline steel
   Scripta Materialia, vol. 52, no. 2, pp. 147–152, 2005
4. Simulation of primary recrystallization from TEM observations and neutron diffraction measurements
   Scripta Materialia, vol. 51, no. 5, pp. 427–430, 2004
5. Onset of abnormal growth related to the crystallographic neighbourhood from the texture function. Application to Goss grain growth in magnetic sheets of Fe?3%Si
   Journal of Crystal Growth, vol. 268, no. 1-2, pp. 320–327, 2004
6. Microstructural characterization in a hot-rolled, two-phase steel
   Materials Characterization, vol. 47, no. 5, pp. 365–373, 2001
7. Simulation of primary recrystallization from tem orientation data
   Scripta Materialia, vol. 43, no. 1, pp. 63–68, 2000
8. “in-situ” neutron diffraction study of the cube crystallographic texture development in Fe53%-Ni alloy during recrystallization
   Scripta Materialia, vol. 43, no. 4, pp. 325–330, 2000
9. Neutron diffraction study of the cube texture development in FeNi53% alloy
   Physica B: Condensed Matter, vol. 276-278, no. 1-3, pp. 914–915, 2000
10. Microstructure and creep deformation of a near beta titanium alloy 'ß-CEZ'
    Materials Science and Engineering A, vol. 262, no. 1-2, pp. 50–63, 1999
11. On critical polyhedrons for B.C.C. and H.C.P. materials
    International Journal of Plasticity, vol. 15, no. 2, pp. 209–222, 1999
12. Étude des déformations élastiques résiduelles dans les quartzites
    Comptes Rendus de l'Académie des Sciences - Series IIA - Earth and Planetary Science, vol. 328, no. 11, pp. 733–738, 1999
13. Simulation of the anisotropic growth of goss grains in Fe3%Si sheets (grade HiB)
    Scripta Materialia, vol. 40, no. 10, pp. 1111–1116, 1999
14. Texture and grain size dependence of grain boundary character distribution in recrystallized Fe-50%Ni
    Scripta Materialia, vol. 41, no. 8, pp. 847–853, 1999
15. Microstructure and chemistry of an Al-4.7 wt.%Mg alloy subsurface after cold-rolling
    Scripta Materialia, vol. 41, no. 10, pp. 1103–1108, 1999
16. Grain growth simulation starting from experimental data
    Scripta Materialia, vol. 36, no. 7, pp. 789–794, 1997
17. Orientation changes inside shear bands occurring in channel-die compressed (112)[1]copper single crystals
    Scripta Materialia, vol. 35, no. 3, pp. 397–403, 1996
18. Semiautomatic measurement of individual orientation of crystals by using etch pits and digitized images
    Materials Characterization, vol. 34, no. 3, pp. 189–194, 1995
19. Deformation textures and plastic anisotropy of steels using the Taylor and nonhomogeneous models
    International Journal of Plasticity, vol. 10, no. 6, pp. 643–661, 1994
20. Microtexture determination in Fe–Si alloy sheets by etch pitting. Comparison with the electron back-scattering pattern technique
    Journal of Applied Crystallography, vol. 27, no. 6, pp. 924–933, 1994
21. Determination of the total texture function from individual orientations modelled by a Lorentzian distribution
    Journal of Applied Crystallography, vol. 26, no. 2, pp. 207–213, 1993
22. Microtexture Characterization by EBSP in Iron and Titanium Alloys
    Textures and Microstructures, vol. 20, no. 1-4, pp. 165–177, 1993
23. Caractérisation de la texture de recristallisation primaire et de la spécialité des joints de grains de tôles de Fe-3%Si par diffraction des electrons rétrodiffusés
    Journal of Applied Crystallography, vol. 25, no. 3, pp. 400–408, 1992
24. Influence of an increasing content of molybdenum on phase transformations of Ti_Al_Mo aluminides — relation with mechanical properties
    Materials Science and Engineering A, vol. 152, no. 1-2, pp. 48–53, 1992
25. Texture and pyramidal slip in Ti, Zr and their alloys
    Scripta Metallurgica et Materialia, vol. 27, no. 12, pp. 1859–1863, 1992
26. On the influence of latent hardening on texture development in face-centered-cubic metals
    Scripta Metallurgica et Materialia, vol. 25, no. 2, pp. 377–382, 1991
27. Phase transformations in Ti
    Journal of Materials Research, vol. 6, no. 5, Article ID 1991.0969, 17 pages, 1991
28. Contribution to the analysis of the α/β interface in some titanium alloys
    Journal of Materials Research, vol. 6, no. 5, Article ID 1991.0987, 11 pages, 1991
29. Evolution of local texture and grain boundary characteristics during secondary recrystallisation of Fe-3% Si sheets
    Acta Metallurgica et Materialia, vol. 38, no. 6, pp. 1101–1107, 1990
30. Etude de la cavitation produite par etirage de barres de zirconium - application de la diffusion des neutrons aux petits angles -
    Scripta Metallurgica, vol. 20, no. 3, pp. 361–364, 1986
31. Étude de la texture et des mécanismes de recristallisation primaire d'une tôle mince de titane laminée puis recuite en phase alpha
    Journal of the Less Common Metals, vol. 56, no. 2, pp. 277–288, 1977
32. Application de la représentation tridimensionnelle des textures a l'étude de l'évolution des textures de laminage et de recristallisation du titane
    Journal of the Less Common Metals, vol. 55, no. 1, pp. 25–43, 1977
33. The influence of the crystallite orientation distribution function (ODF) on the magnetocrystalline anisotropy of a rimmed steel thin sheet
    IEEE Transactions on Magnetics, vol. 10, no. 2, pp. 120–122, 1974