Articles in Scholarly Journals [Incomplete List]

1. Combining air sparging and the use of a static mixer in cross-flow ultrafiltration of oil/water emulsion
   Desalination, vol. 204, no. 1-3, pp. 255–264, 2007
2. A new measuring method to detect the emissions of metal working fluid mist
   Journal of Hazardous Materials, vol. 144, no. 3, pp. 736–741, 2007
3. Transmitted-light microscopy – a new method for surface structure analysis of cleanable non-woven dust filter media
   Journal of Hazardous Materials, vol. 144, no. 3, pp. 742–746, 2007
4. Energy-saving potential of cross-flow ultrafiltration with inserted static mixer: Application to an oil-in-water emulsion?
   Separation and Purification Technology, vol. 57, no. 1, pp. 134–139, 2007
5. Particle Bleeding of Precoat Layers on Slotted Metal Sheets and Dutch Weave
   Chemical Engineering & Technology, vol. 28, no. 1, pp. 44–48, 2005
6. Charakterisierung der Oberflächenbehandlung und des Verstopfungsverhaltens von abreinigbaren Staubfiltermedien mittels Bildanalyse
   Chemie Ingenieur Technik, vol. 76, no. 10, pp. 1504–1508, 2004
7. Reduction of nitrite in aged heat transfer media at elevated temperatures
   Materials and Corrosion, vol. 55, no. 1, pp. 43–45, 2004
8. Ion chromatographic identification and quantification of glycol degradation products
   Journal of Chromatography A, vol. 997, no. 1-2, pp. 279–284, 2003
9. Influence of operating parameters on precoat layers built up under crossflow condition
   Separation and Purification Technology, vol. 31, no. 3, pp. 269–280, 2003
10. Comparison of different scraper designs for crossflow filtration with rotating discs and cake limitation by scrapers
    Separation and Purification Technology, vol. 26, no. 1, pp. 111–119, 2002
11. 3D-flow simulation and optimization of a cross flow filtration with rotating discs
    Separation and Purification Technology, vol. 26, no. 1, pp. 121–131, 2002
12. Continuous Pressure Filter with Rotating Disks and Cake Thickness Limitation by Scrapers
    Chemical Engineering & Technology, vol. 22, no. 11, p. 912, 1999
13. Quantification of re-evaporated mass from loaded fibre-mist eliminators
    Journal of Environmental Monitoring, vol. 1, no. 4, pp. 373–377, 1999
14. Reduction and avoidance of lubricant mist demands an integrated assessment approach
    Journal of Environmental Monitoring, vol. 1, no. 4, pp. 389–394, 1999
15. Simulation of the regeneration of dust filters
    Mathematics and Computers in Simulation, vol. 46, no. 5-6, pp. 601–609, 1998
16. Simulation of the long-term behaviour of regenerateable dust filters*1
    Filtration & Separation, vol. 35, no. 4, pp. 373–377, 1998
17. Model calculation of the compression behaviour of dust filter cakes
    Filtration & Separation, vol. 31, no. 8, pp. 807–811, 1994
18. Evaluation of optimal knife advances for precoat filtration on rotary vacuum filters
    Filtration & Separation, vol. 27, no. 2, pp. 110–113, 1990
19. Precoat-Filtration am Vakuumtrommelfilter, Prozeßmodelle für die Oberflächenfiltration
    Chemie Ingenieur Technik, vol. 57, no. 6, pp. 552–553, 1985
20. Precoat-Filtration am Vakuumtrommelfilter, Prozeßmodelle für die Tiefenfiltration
    Chemie Ingenieur Technik, vol. 57, no. 8, pp. 706–707, 1985