Mark Daymond

Articles in Scholarly Journals [Incomplete List]

  1. Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel
    Acta Materialia, vol. 55, no. 6, pp. 1999–2011, 2007
  2. Evidence of variation in slip mode in a polycrystalline nickel-base superalloy with change in temperature from neutron diffraction strain measurements
    Acta Materialia, vol. 55, no. 9, pp. 3089–3102, 2007
  3. Strain and texture evolution during mechanical loading of a crack tip in martensitic shape-memory NiTi
    Acta Materialia, vol. 55, no. 11, pp. 3929–3942, 2007
  4. A finite element model of deformation twinning in zirconium
    Materials Science and Engineering: A, 2007
  5. Time-resolved and orientation-dependent electric-field-induced strains in lead zirconate titanate ceramics
    Applied Physics Letters, vol. 90, no. 17, p. 172909, 2007
  6. Dynamical diffraction peak splitting in time-of-flight neutron diffraction
    Applied Physics Letters, vol. 89, no. 23, p. 233515, 2006
  7. A new apparatus for measuring mechanical properties at moderate confining pressures in a neutron beamline
    Journal of Applied Crystallography, vol. 39, no. 2, pp. 222–229, 2006
  8. ENGIN-X: a third-generation neutron strain scanner
    Journal of Applied Crystallography, vol. 39, no. 6, pp. 812–825, 2006
  9. NON-DESTRUCTIVE INVESTIGATION OF BRONZE ARTEFACTS FROM THE MARCHES NATIONAL MUSEUM OF ARCHAEOLOGY USING NEUTRON DIFFRACTION*
    Archaeometry, vol. 48, no. 1, pp. 77–96, 2006
  10. Deformation-induced phase development in a cobalt-based superalloy during monotonic and cyclic deformation
    Physica B: Condensed Matter, vol. 385-386, pp. 523–525, 2006
  11. Methodology and recent developments for using neutron diffraction to characterize the mechanical properties of rocks
    Physica B: Condensed Matter, vol. 385-386, pp. 938–941, 2006
  12. Using neutrons to investigate changes in strain partitioning between the phases during plastic yielding of calcite+halite composites
    Physica B: Condensed Matter, vol. 385-386, pp. 946–948, 2006
  13. Tensile deformation of a Cu mosaic crystal along the [110] direction studied by time of flight neutron transmission
    Materials Science and Engineering: A, 2006
  14. Application of quenching to create highly triaxial residual stresses in type 316H stainless steels
    International Journal of Mechanical Sciences, vol. 48, no. 3, pp. 235–243, 2006
  15. Residual stresses in a quenched superalloy turbine disc: Measurements and modeling
    Metallurgical and Materials Transactions A, vol. 37, no. 2, pp. 459–467, 2006
  16. Elastoplastic deformation of 316 stainless steel under tensile loading at elevated temperatures
    Metallurgical and Materials Transactions A, vol. 37, no. 6, pp. 1863–1873, 2006
  17. Effect of cyclic plasticity on internal stresses in a metal matrix composite
    Metallurgical and Materials Transactions A, vol. 37, no. 6, pp. 1977–1986, 2006
  18. Study of martensitic transformation in fatigued stainless steel by neutron diffraction stress analysis
    Zeitschrift f�r Kristallographie, vol. 2006, no. suppl_23/2006, pp. 345–350, 2006
  19. Internal Stresses in Deformed Crystalline Aggregates
    Reviews in Mineralogy and Geochemistry, vol. 63, no. 1, pp. 427–458, 2006
  20. Intergranular Strains in Transforming NiTi Alloys
    IEEE Transactions on Nuclear Science, vol. 52, no. 1, pp. 326–329, 2005
  21. Microstrain evolution during creep of a high volume fraction superalloy
    Materials Science and Engineering: A, vol. 399, no. 1-2, pp. 141–153, 2005
  22. Interphase and intergranular stress generation in composites exhibiting plasticity in both phases
    Acta Materialia, vol. 53, no. 9, pp. 2805–2813, 2005
  23. Measurement and modelling of residual stresses in straightened commercial eutectoid steel rods
    Acta Materialia, vol. 53, no. 16, pp. 4415–4425, 2005
  24. Orientation dependence of martensite variants during loading of Fe–Pd shape memory alloy
    Scripta Materialia, vol. 53, no. 5, pp. 609–612, 2005
  25. Fatigue-induced phase formation and its deformation behavior in a cobalt-based superalloy
    Powder Diffraction, vol. 20, no. 2, p. 121, 2005
  26. Investigation of mechanical features of low cycle fatigue specimens of austenitic steel AISI type 321 under applied load by neutron diffraction stress analysis
    Materials Science and Technology, vol. 21, no. 1, pp. 35–45, 2005
  27. A new belt-type apparatus for neutron-based rheological measurements at gigapascal pressures
    International Journal of High Pressure Research, vol. 25, no. 2, pp. 107–118, 2005
  28. Measuring strain distributions in amorphous materials
    Nature Materials, vol. 4, no. 1, Article ID nmat1266, 3 pages, 2005
  29. The determination of a continuum mechanics equivalent elastic strain from the analysis of multiple diffraction peaks
    Journal of Applied Physics, vol. 96, no. 8, p. 4263, 2004
  30. Intergranular stresses in polycrystalline fatigue: diffraction measurement and self-consistent modelling
    Engineering Fracture Mechanics, vol. 71, no. 4-6, pp. 805–812, 2004
  31. A comparison between Engin and Engin-X, a new diffractometer optimized for stress measurement
    Physica B: Condensed Matter, vol. 350, no. 1-3, pp. E511–E514, 2004
  32. A virtual laboratory for neutron and synchrotron strain scanning
    Physica B: Condensed Matter, vol. 350, no. 1-3, pp. E743–E746, 2004
  33. Interplay of stresses induced by phase transformation and plastic deformation during cyclic load of austenitic stainless steel
    Physica B: Condensed Matter, vol. 350, no. 1-3, pp. 98–101, 2004
  34. Interphase and intergranular stress generation in carbon steels
    Acta Materialia, vol. 52, no. 7, pp. 1937–1951, 2004
  35. In situ neutron diffraction studies of martensitic transformations in NiTi polycrystals under tension and compression stress
    Materials Science and Engineering A, vol. 378, no. 1-2, pp. 97–104, 2004
  36. Neutron diffraction study of stress-induced martensitic transformation and variant change in Fe?Pd shape memory alloy
    Materials Science and Engineering A, vol. 378, no. 1-2, pp. 328–332, 2004
  37. Micromechanics of stress-induced martensitic transformation
    Materials Science and Engineering A, vol. 378, no. 1-2, pp. 479–483, 2004
  38. Prediction and measurement of residual stresses in quenched stainless-steel spheres
    Materials Science and Engineering A, vol. 373, no. 1-2, pp. 339–349, 2004
  39. Size–strain line-broadening analysis of the ceria round-robin sample
    Journal of Applied Crystallography, vol. 37, no. 6, pp. 911–924, 2004
  40. Neutron diffraction study of stress-induced martensitic transformation and variant change in Fe–Pd
    Acta Materialia, vol. 51, no. 20, pp. 6453–6464, 2003
  41. Using neutron diffraction measurements to characterize the mechanical properties of polymineralic rocks
    Mineralogical Magazine, vol. 67, no. 5, pp. 967–987, 2003
  42. Texture and strain analysis of the ferroelastic behavior of Pb(Zr,Ti)O[sub 3] by in situ neutron diffraction
    Journal of Applied Physics, vol. 93, no. 7, p. 4104, 2003
  43. Mechanical energy criterion for stress-induced martensitic transformation
    Scripta Materialia, vol. 49, no. 10, pp. 1013–1019, 2003
  44. Silicon APS detectors for neutron scattering
    Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 501, no. 1, pp. 72–79, 2003
  45. Measurement of strain in a titanium linear friction weld by neutron diffraction
    Physica B: Condensed Matter, vol. 325, pp. 130–137, 2003
  46. Lattice strain evolution in IMI 834 under applied stress
    Materials Science and Engineering A, vol. 340, no. 1-2, pp. 272–280, 2003
  47. Neutron diffraction study of the deformation behaviour of deformation processed copper–chromium composites
    Materials Science and Engineering A, vol. 348, no. 1-2, pp. 208–216, 2003
  48. Stress-induced martensitic transformation in Cu–Al–Zn–Mn polycrystal investigated by two in-situ neutron diffraction techniques1
    Materials Science and Engineering A, vol. 324, no. 1-2, pp. 225–234, 2002
  49. The correlation between plastic strain and anisotropy strain in aluminium alloy polycrystals
    Materials Science and Engineering A, vol. 334, no. 1-2, pp. 41–48, 2002
  50. Elastoplastic deformation of ferritic steel and cementite studied by neutron diffraction and self-consistent modelling
    Acta Materialia, vol. 50, no. 6, pp. 1613–1626, 2002
  51. Lattice strain evolution during cyclic loading of stainless steel
    Acta Materialia, vol. 50, no. 6, pp. 1627–1638, 2002
  52. Intergranular strain accumulation in a near-alpha titanium alloy during plastic deformation
    Acta Materialia, vol. 50, no. 19, pp. 4847–4864, 2002
  53. Analysis of neutron diffraction strain measurement data from a round robin sample
    The Journal of Strain Analysis for Engineering Design, vol. 37, no. 1, pp. 73–85, 2002
  54. Fast residual stress mapping using energy-dispersive synchrotron X-ray diffraction on station 16.3 at the SRS
    Journal of Synchrotron Radiation, vol. 9, no. 2, pp. 77–81, 2002
  55. An optimum design for a time-of-flight neutron diffractometer for measuring engineering stresses
    Journal of Applied Crystallography, vol. 35, no. 1, pp. 49–57, 2002
  56. Strain imaging by Bragg edge neutron transmission
    Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 481, no. 1-3, pp. 765–768, 2002
  57. An experimental test of a neutron silicon lens
    Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 485, no. 3, pp. 606–614, 2002
  58. Neutron strain scanning in straightened eutectoid steel rods
    Applied Physics A: Materials Science & Processing, vol. 74, no. 0, pp. s1679–s1682, 2002
  59. The expected uncertainty of diffraction-peak location
    Applied Physics A: Materials Science & Processing, vol. 74, no. 0, pp. s112–s114, 2002
  60. Neutron-diffraction study of martensitic transformation in austenitic stainless steel under low-cycling tensile-compressive loading
    Applied Physics A: Materials Science & Processing, vol. 74, no. 0, pp. s1391–s1393, 2002
  61. Residual stress states before irradiation in ESS target structural materials
    Applied Physics A: Materials Science & Processing, vol. 74, no. 0, pp. s1197–s1199, 2002
  62. Neutron-diffraction study of stress-induced martensitic transformation in TRIP steel
    Applied Physics A: Materials Science & Processing, vol. 74, no. 0, pp. s1143–s1145, 2002
  63. Time-of-flight neutron-diffraction investigations of elastic and anisotropy strains in fatigued austenitic stainless steel
    Applied Physics A: Materials Science & Processing, vol. 74, no. 0, pp. s1385–s1387, 2002
  64. Bragg Edge Determination for Accurate Lattice Parameter and Elastic Strain Measurement
    physica status solidi (a), vol. 185, no. 2, pp. 221–230, 2001
  65. Microyielding Effects in High-Volume-Fraction MMCs
    Advanced Engineering Materials, vol. 3, no. 11, p. 913, 2001
  66. The blurring in strains measured at a pulsed neutron source introduced by the use of a detector with a large angular coverage
    Physica B: Condensed Matter, vol. 301, no. 3-4, pp. 221–226, 2001
  67. The determination of a stress-free lattice parameter within a stressed material using elastic anisotropy
    Journal of Applied Crystallography, vol. 34, no. 3, pp. 263–270, 2001
  68. On the diffractive determination of single-crystal elastic constants using polycrystalline samples
    Journal of Applied Crystallography, vol. 34, no. 5, pp. 585–601, 2001
  69. The precision of diffraction peak location
    Journal of Applied Crystallography, vol. 34, no. 6, pp. 737–743, 2001
  70. A finite-element analysis of the inelastic relaxation of thermal residual stress in continuous-fiber-reinforced composites
    Composites Science and Technology, vol. 61, no. 12, pp. 1757–1772, 2001
  71. The neutron silicon lens: a new lens design for thermal neutrons
    Physica B: Condensed Matter, vol. 283, no. 4, pp. 308–313, 2000
  72. Measured and predicted intergranular strains in textured austenitic steel
    Acta Materialia, vol. 48, no. 2, pp. 553–564, 2000
  73. Texture and residual strain in two SiC/Ti-6-2-4-2 titanium composites
    Metallurgical and Materials Transactions A, vol. 31, no. 3, pp. 889–898, 2000
  74. Elastic phase-strain distribution in a particulate-reinforced metal-matrix composite deforming by slip or creep
    Metallurgical and Materials Transactions A, vol. 30, no. 11, pp. 2989–2997, 1999
  75. Lattice strain evolution during uniaxial tensile loading of stainless steel
    Materials Science and Engineering A, vol. 259, no. 1, pp. 17–24, 1999
  76. Comparison of residual strains measured by X-ray and neutron diffraction in a titanium (Ti–6Al–4V) matrix composite
    Materials Science and Engineering A, vol. 259, no. 2, pp. 209–219, 1999
  77. Thermal residual stresses in NiAl–AlN–Al2O3 composites measured by neutron diffraction
    Materials Science and Engineering A, vol. 264, no. 1-2, pp. 108–121, 1999
  78. Applied Composite Materials, vol. 4, no. 6, pp. 375–393, 1997
  79. Use of Rietveld refinement for elastic macrostrain determination and for evaluation of plastic strain history from diffraction spectra
    Journal of Applied Physics, vol. 82, no. 4, p. 1554, 1997
  80. A new stroboscopic neutron diffraction method for monitoring materials subjected to cyclic loads: Thermal cycling of metal matrix composites
    Scripta Materialia, vol. 35, no. 6, pp. 717–720, 1996
  81. A synchrotron radiation study of transient internal strain changes during the early stages of thermal cycling in an Al / SiCw MMC
    Scripta Materialia, vol. 35, no. 10, pp. 1229–1234, 1996