Chun-Hway Hsueh

Articles in Scholarly Journals [Incomplete List]

  1. Recent advances in modeling stress distributions in multilayers subjected to biaxial flexure tests
    Composites Science and Technology, vol. 67, no. 2, pp. 278–285, 2007
  2. Analyses of multilayered dental ceramics subjected to biaxial flexure tests
    Dental Materials, vol. 22, no. 5, pp. 460–469, 2006
  3. Modelling of bonded multilayered disks subjected to biaxial flexure tests
    International Journal of Solids and Structures, vol. 43, no. 20, pp. 6014–6025, 2006
  4. Analyses of mechanical failure in nanoimprint processes
    Materials Science and Engineering: A, vol. 433, no. 1-2, pp. 316–322, 2006
  5. Analyses of mode I edge delamination by thermal stresses in multilayer systems
    Composites Part B: Engineering, vol. 37, no. 1, pp. 1–9, 2006
  6. An improved correlation between impression and uniaxial creep
    Journal of Applied Physics, vol. 99, no. 11, p. 113513, 2006
  7. Thin-film adhesion measurement using laser-generated high-power surface acoustic wave
    Applied Physics Letters, vol. 88, no. 19, p. 191911, 2006
  8. Thermal stress analyses of multilayered films on substrates and cantilever beams for micro sensors and actuators
    Journal of Micromechanics and Microengineering, vol. 16, no. 11, pp. 2509–2515, 2006
  9. Modeling of Thermal Stresses in Joining Two Layers with Multi- and Graded Interlayers
    Journal of the American Ceramic Society, vol. 89, no. 1, pp. 251–257, 2006
  10. Interfacial Peeling Moments and Shear Forces at Free Edges of Multilayers Subjected to Thermal Stresses
    Journal of the American Ceramic Society, vol. 89, no. 5, pp. 1632–1638, 2006
  11. Effective Viscosity of Suspensions of Spheres
    Journal of the American Ceramic Society, vol. 88, no. 4, pp. 1046–1049, 2005
  12. Stress Distributions in Thin Bilayer Discs Subjected to Ball-On-Ring Tests
    Journal of the American Ceramic Society, vol. 88, no. 6, pp. 1687–1690, 2005
  13. Effects of dopant segregation on lattice-diffusional creep of nanocrystalline ceramics
    Physical Review B, vol. 71, no. 1, 2005
  14. Reorientation of carbon nanotubes in polymer matrix composites using compressive loading
    Journal of Materials Research, vol. 20, no. 4, pp. 1026–1032, 2005
  15. Combined empirical–analytical method for determining contact radius and indenter displacement during Hertzian indentation on coating/substrate systems
    Journal of Materials Research, vol. 19, no. 9, pp. 2774–2781, 2004
  16. Multiple cracking of brittle coatings on strained substrates
    Journal of Applied Physics, vol. 96, no. 6, p. 3501, 2004
  17. Journal of Materials Science, vol. 38, no. 8, pp. 1809–1817, 2003
  18. Viscoelastic stress relaxation in film/substrate systems—Kelvin model
    Journal of Applied Physics, vol. 93, no. 5, p. 2453, 2003
  19. An Alternative Method of Solving Multilayer Bending Problems
    Journal of Applied Mechanics, vol. 70, no. 1, p. 151, 2003
  20. Devising a method of making actuators with reduced poling-induced tension
    Sensors and Actuators A: Physical, vol. 107, no. 1, pp. 14–20, 2003
  21. Modeling of elastic thermal stresses in two materials joined by a graded layer
    Composites Part B: Engineering, vol. 34, no. 8, pp. 747–752, 2003
  22. Stress distribution and curvature in graded semiconductor layers
    Journal of Crystal Growth, vol. 258, no. 3-4, pp. 302–309, 2003
  23. Thermal stresses in elastic multilayer systems
    Thin Solid Films, vol. 418, no. 2, pp. 182–188, 2002
  24. Apparent coefficient of thermal expansion and residual stresses in multilayer capacitors
    Composites Part A: Applied Science and Manufacturing, vol. 33, no. 8, pp. 1115–1121, 2002
  25. Effects of viscous flow on residual stresses in film/substrate systems
    Journal of Applied Physics, vol. 91, no. 5, p. 2760, 2002
  26. Modeling of elastic deformation of multilayers due to residual stresses and external bending
    Journal of Applied Physics, vol. 91, no. 12, p. 9652, 2002
  27. Modeling of thermal stresses in passivated interconnects
    Journal of Applied Physics, vol. 92, no. 1, p. 144, 2002
  28. Journal of Materials Science, vol. 36, no. 1, pp. 255–261, 2001
  29. Critical epitaxial film thickness for forming interface dislocations
    Materials Science and Engineering A, vol. 309-310, pp. 473–477, 2001
  30. Effect of substrate modulus difference on dislocation formation in an epitaxial film
    Mechanics of Materials, vol. 33, no. 2, pp. 105–120, 2001
  31. Young's modulus of unidirectional discontinuous-fibre composites
    Composites Science and Technology, vol. 60, no. 14, pp. 2671–2680, 2000
  32. Residual stresses in thermal barrier coatings: effects of interface asperity curvature/height and oxide thickness
    Materials Science and Engineering A, vol. 283, no. 1-2, pp. 46–55, 2000
  33. The importance of amorphous intergranular films in self-reinforced Si3N4 ceramics
    Acta Materialia, vol. 48, no. 18-19, pp. 4493–4499, 2000
  34. Deflection versus penetration of a wedge-loaded crack: effects of branch-crack length and penetrated-layer width
    Composites Part B: Engineering, vol. 31, no. 4, pp. 299–308, 2000
  35. Analytical modeling of oxide thickness effects on residual stresses in thermal barrier coatings
    Scripta Materialia, vol. 42, no. 8, pp. 781–787, 2000
  36. Debonding behavior between ß-Si3N4 whiskers and oxynitride glasses with or without an epitaxial ß-SiAlON interfacial layer
    Acta Materialia, vol. 47, no. 9, pp. 2777–2785, 1999
  37. Analytical and numerical analyses for two-dimensional stress transfer
    Materials Science and Engineering A, vol. 268, no. 1-2, pp. 1–7, 1999
  38. Model experiment on a protrusion method for measurement of interface shear sliding stress in fiber-reinforced composite
    Materials Science and Engineering A, vol. 271, no. 1-2, pp. 70–78, 1999
  39. Influence of residual stress on thermal expansion behavior
    Applied Physics Letters, vol. 75, no. 21, p. 3294, 1999
  40. Criteria for formation of interface dislocations in a finite thickness epilayer deposited on a substrate
    Journal of Applied Physics, vol. 85, no. 11, p. 7579, 1999
  41. Journal of Materials Science Letters, vol. 17, no. 16, pp. 1421–1425, 1998
  42. Some applications of two-dimensional stress transfer analyses
    Acta Materialia, vol. 46, no. 6, pp. 2131–2138, 1998
  43. Interfacial shear debonding problems in fiber-reinforced ceramic composites
    Acta Materialia, vol. 46, no. 9, pp. 3237–3245, 1998
  44. Journal of Materials Science, vol. 33, no. 15, pp. 3891–3898, 1998
  45. Stress transfer in a model composite containing a single embedded fiber
    Acta Materialia, vol. 45, no. 4, pp. 1469–1476, 1997
  46. Journal of Materials Science Letters, vol. 16, no. 5, pp. 354–357, 1997
  47. Influence of Reinforcement Content and Diameter on the R-Curve Response in SiC-Whisker-Reinforced Alumina
    Journal of the American Ceramic Society, vol. 79, no. 2, pp. 298–304, 1996
  48. Debonding of interfaces between beta-silicon nitride whiskers and Si_Al_Y oxynitride glasses
    Acta Materialia, vol. 44, no. 10, pp. 3881–3893, 1996
  49. Crack-wake interfacial debonding criteria for fiber-reinforced ceramic composites
    Acta Materialia, vol. 44, no. 6, pp. 2211–2216, 1996
  50. Experimental and theoretical aspects of slice compression tests
    Materials Science and Engineering A, vol. 205, no. 1-2, pp. 91–100, 1996
  51. Residual thermal stresses in ceramic composites. Part I: with ellipsoidal inclusions
    Materials Science and Engineering A, vol. 212, no. 1, pp. 22–28, 1996
  52. Residual thermal stresses in ceramic composites, Part II: with short fibers
    Materials Science and Engineering A, vol. 212, no. 1, pp. 29–35, 1996
  53. Thermal expansion anisotropy in hot-pressed SiC-whisker-reinforced alumina composites
    Materials Science and Engineering A, vol. 196, no. 1-2, pp. 249–251, 1995
  54. Matrix cracking with frictional bridging fibres in continuous fibre ceramic composites
    Journal of Materials Science, vol. 30, no. 7, pp. 1781–1789, 1995
  55. A modified analysis for stress transfer in fibre-reinforced composites with bonded fibre ends
    Journal of Materials Science, vol. 30, no. 1, pp. 219–224, 1995
  56. Matrix cracking with bonded interfaces in unidirectional fibre-reinforced composites
    Journal of Materials Science Letters, vol. 14, no. 23, pp. 1698–1701, 1995
  57. Matrix cracking with frictional bridging fibres in continuous fibre ceramic composites
    Journal of Materials Science, vol. 30, no. 19, pp. 4793–4800, 1995
  58. Internal Stresses and the Martensite Start Temperature in Alumina-Zirconia Composites: Effects of Composition and Microstructure
    Journal of the American Ceramic Society, vol. 78, no. 2, pp. 291–296, 1995
  59. Pull-out of a ductile fibre from a brittle matrix
    Journal of Materials Science, vol. 29, no. 19, pp. 5135–5140, 1994
  60. Consideration of radial dependences of axial stresses in the shear-lag model for fibre pull-out
    Journal of Materials Science, vol. 29, no. 7, pp. 1801–1806, 1994
  61. Pull-out of a ductile fibre from a brittle matrix
    Journal of Materials Science, vol. 29, no. 18, pp. 4793–4801, 1994
  62. Theoretical and experimental studies of fiber pull-out of SiC fiber-reinforced glasses
    Journal of the European Ceramic Society, vol. 13, no. 1, pp. 47–52, 1994
  63. Embedded-end debonding during fiber pull-out
    Materials Science and Engineering A, vol. 163, no. 1, pp. L1–L4, 1993
  64. Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites, X: with an elastic interfacial coating
    Materials Science and Engineering A, vol. 165, no. 2, pp. 189–195, 1993
  65. Analyses of slice compression tests for aligned ceramic matrix composites
    Acta Metallurgica et Materialia, vol. 41, no. 12, pp. 3585–3593, 1993
  66. The relative residual fibre displacement after indentation loading and unloading of fibre-reinforced ceramic composites
    Journal of Materials Science, vol. 28, no. 8, pp. 2227–2232, 1993
  67. Evaluations of residual axial stresses and interfacial friction in Nicalon fibre-reinforced macro-defect-free cement composites
    Journal of Materials Science, vol. 28, no. 9, pp. 2551–2556, 1993
  68. Some considerations of two-way debonding during fibre pull-out
    Journal of Materials Science Letters, vol. 12, no. 24, pp. 1933–1936, 1993
  69. Evaluation of Interfacial Properties of Fiber-Reinforced Ceramic Composites Using a Mechanical Properties Microprobe
    Journal of the American Ceramic Society, vol. 76, no. 12, pp. 3041–3050, 1993
  70. Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites VII:improved analyses for bonded interfaces
    Materials Science and Engineering A, vol. 154, no. 2, pp. 125–132, 1992
  71. Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites VIII: The energy-based debonding criterion
    Materials Science and Engineering A, vol. 159, no. 1, pp. 65–72, 1992
  72. Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites III: With residual radial and axial stresses
    Materials Science and Engineering A, vol. 145, no. 2, pp. 135–142, 1991
  73. Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites IV: sliding due to residual stresses
    Materials Science and Engineering A, vol. 145, no. 2, pp. 143–150, 1991
  74. Some applications of fibre pullout analyses
    Journal of Materials Science Letters, vol. 10, no. 1, pp. 29–32, 1991
  75. Interfacial properties of SiC-borosilicate glass composites evaluated from pushout and pullout tests
    Journal of Materials Science Letters, vol. 10, no. 3, pp. 135–138, 1991
  76. Effects of interfacial bonding on sliding phenomena during compressive loading of an embedded fibre
    Journal of Materials Science, vol. 25, no. 9, pp. 4080–4086, 1990
  77. Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites
    Materials Science and Engineering A, vol. 123, no. 1, pp. 1–11, 1990
  78. Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites II: Non-constant interfacial bond strength
    Materials Science and Engineering A, vol. 125, no. 1, pp. 67–73, 1990
  79. Evaluation of interfacial shear strength, residual clamping stress and coefficient of friction for fiber-reinforced ceramic composites
    Acta Metallurgica et Materialia, vol. 38, no. 3, pp. 403–409, 1990
  80. Effects of Friction in Ceramic Coating/Fiber Composites
    Journal of Composite Materials, vol. 24, no. 6, pp. 572–593, 1990
  81. Effects of Aspect Ratios of Ellipsoidal Inclusions on Elastic Stress Transfer of Ceramic Composites
    Journal of the American Ceramic Society, vol. 72, no. 2, pp. 344–347, 1989
  82. Elastic stress transfer from fiber to coating in a fiber-coating system
    Materials Science and Engineering A, vol. 117, pp. 115–123, 1989
  83. Theoretical and experimental analysis of the toughening behavior of whisker reinforcement in ceramic matrix composites1
    Materials Science and Engineering A, vol. 107, pp. 257–259, 1989
  84. Analytical analyses of stress transfer in fibre-reinforced composites with bonded and debonded fibre ends
    Journal of Materials Science, vol. 24, no. 12, pp. 4475–4482, 1989
  85. Some considerations of evaluation of interfacial frictional stress from the indentation technique for fibre-reinforced ceramic composites
    Journal of Materials Science Letters, vol. 8, no. 6, pp. 739–742, 1989
  86. Elastic load transfer from partially embedded axially loaded fibre to matrix
    Journal of Materials Science Letters, vol. 7, no. 5, pp. 497–500, 1988
  87. Residual stress and strain in pyrolytic boron nitride resulting from thermal anisotropy
    Journal of Materials Science, vol. 23, no. 6, pp. 1901–1905, 1988
  88. Toughening Behavior in Whisker-Reinforced Ceramic Matrix Composites
    Journal of the American Ceramic Society, vol. 71, no. 12, pp. 1050–1061, 1988
  89. Effects of Interfacial Films on Thermal Stresses in Whisker-Reinforced Ceramics
    Journal of the American Ceramic Society, vol. 71, no. 11, pp. 929–933, 1988
  90. Liquid-Phase Sintering of Ceramics
    Journal of the American Ceramic Society, vol. 70, no. 10, pp. 708–713, 1987
  91. High-Temperature Stress Corrosion Cracking in Ceramics
    Journal of the American Ceramic Society, vol. 70, no. 4, pp. 257–264, 1987
  92. Creep During Sintering of Porous Compacts
    Journal of the American Ceramic Society, vol. 69, no. 1, pp. 58–60, 1986
  93. Behavior of Large Pores During Sintering and Hot Isostatic Pressing
    Journal of the American Ceramic Society, vol. 69, no. 6, pp. 444–448, 1986
  94. Sintering behaviour of powder compacts with multiheterogeneities
    Journal of Materials Science, vol. 21, no. 6, pp. 2067–2072, 1986
  95. Transient stresses in bimodal compacts during sintering
    Acta Metallurgica, vol. 34, no. 7, pp. 1467–1471, 1986
  96. Viscoelastic stresses and sintering damage in heterogeneous powder compacts
    Acta Metallurgica, vol. 34, no. 5, pp. 927–936, 1986
  97. Sintering of a ceramic film on a rigid substrate
    Scripta Metallurgica, vol. 19, no. 10, pp. 1213–1217, 1985
  98. Effects of heterogeneity shape on sintering induced stresses
    Scripta Metallurgica, vol. 19, no. 8, pp. 977–982, 1985
  99. Fatigue crack propagation in oil environments— II. A model for crack closure induced by viscous fluids
    Acta Metallurgica, vol. 33, no. 1, pp. 117–127, 1985
  100. Residual Stresses and Cracking in Metal/Ceramic Systems for Microelectronics Packaging
    Journal of the American Ceramic Society, vol. 68, no. 3, pp. 120–127, 1985
  101. Residual Stresses in Meta/Ceramic Bonded Strips
    Journal of the American Ceramic Society, vol. 68, no. 5, pp. 241–248, 1985
  102. Experimental Assessment of Pore Breakaway During Sintering
    Journal of the American Ceramic Society, vol. 66, no. 6, pp. 456–461, 1983
  103. Oxidation induced stresses and some effects on the behavior of oxide films
    Journal of Applied Physics, vol. 54, no. 11, p. 6672, 1983
  104. Microstructure evolution during sintering: The role of evaporation/condensation
    Acta Metallurgica, vol. 31, no. 1, pp. 189–198, 1983
  105. A damage model of creep crack growth in polycrystals
    Acta Metallurgica, vol. 31, no. 10, pp. 1675–1687, 1983
  106. Microstructure development during final/intermediate stage sintering—I. Pore/grain boundary separation
    Acta Metallurgica, vol. 30, no. 7, pp. 1269–1279, 1982
  107. Overview 14 Creep fracture in ceramic polycrystals—II. effects of inhomogeneity on creep rupture
    Acta Metallurgica, vol. 29, no. 12, pp. 1907–1917, 1981