Articles in Scholarly Journals [Incomplete List]

1. The Manufacture of the W7-X Superconducting Magnet System as Relevant Experience for the Construction of the Next Fusion Devices
   IEEE Transactions on Applied Superconductivity, vol. 17, no. 2, pp. 1334–1337, 2007
2. Predictive Analysis of the ITER Poloidal Field Conductor Insert (PFCI) Test Program
   IEEE Transactions on Applied Superconductivity, vol. 17, no. 2, pp. 1353–1357, 2007
3. Conceptual Design of Magnet System for JT-60 Super Advanced (JT-60SA)
   IEEE Transactions on Applied Superconductivity, vol. 17, no. 2, pp. 1348–1352, 2007
4. Progress in the Design, Manufacture and Testing of the W7-X Superconducting Magnets
   IEEE Transactions on Applied Superconductivity, vol. 16, no. 2, pp. 848–851, 2006
5. Design Changes and Impact on the Production of the Non-Planar Coils for the W-7X Experiment
   IEEE Transactions on Applied Superconductivity, vol. 16, no. 2, pp. 890–893, 2006
6. Recent Results of the Cold Tests Performed on the Stellarator W7-X Coils
   IEEE Transactions on Applied Superconductivity, vol. 16, no. 2, pp. 763–766, 2006
7. Design, Production and QA Test Results of the NbTi CIC Conductors for the W7-X Magnet System
   Journal of Physics: Conference Series, vol. 43, pp. 753–758, 2006
8. Lessons learned from the manufacture of the W7-X planar coils
   Journal of Physics: Conference Series, vol. 43, pp. 748–752, 2006
9. Coil tests and superconductor code calculations for the stellarator W7-X coils
   Cryogenics, vol. 46, no. 7-8, pp. 507–516, 2006
10. Cyclic testing of shear keys for the ITER magnet system
    Fusion Engineering and Design, vol. 75-79, pp. 75–79, 2005
11. DC and transient current distribution analysis from self-field measurements on ITER PFIS conductor
    Fusion Engineering and Design, vol. 75-79, pp. 11–15, 2005
12. Design and Manufacture of a Full Size Joint Sample (FSJS) for the Qualification of the Poloidal Field (PF) Insert Coil
    IEEE Transactions on Appiled Superconductivity, vol. 15, no. 2, pp. 1379–1382, 2005
13. Test Results of the ITER PF Insert Conductor Short Sample in SULTAN
    IEEE Transactions on Appiled Superconductivity, vol. 15, no. 2, pp. 1351–1354, 2005
14. Preparation of the ITER Poloidal Field Conductor Insert (PFCI) Test
    IEEE Transactions on Appiled Superconductivity, vol. 15, no. 2, pp. 1346–1350, 2005
15. Acoustic emission and disturbances in central solenoid model coil for International Thermonuclear Experimental Reactor
    Cryogenics, vol. 44, no. 1, pp. 15–27, 2004
16. Design and manufacture of the Poloidal Field Conductor Insert coil
    Fusion Engineering and Design, vol. 66-68, pp. 1081–1086, 2003
17. The ITER-FEAT toroidal field structures
    Fusion Engineering and Design, vol. 58-59, pp. 165–170, 2001
18. Manufacture of full scale models of the ITER Toroidal Field coil cases
    Fusion Engineering and Design, vol. 58-59, pp. 281–287, 2001
19. Assessment of the radial plate design of the ITER TF coil winding pack
    IEEE Transactions on Appiled Superconductivity, vol. 10, no. 1, pp. 592–595, 2000
20. Pancake-wound central solenoid coil for ITER
    IEEE Transactions on Appiled Superconductivity, vol. 10, no. 1, pp. 576–579, 2000
21. Status of ITER magnet design and model coils
    IEEE Transactions on Appiled Superconductivity, vol. 10, no. 1, pp. 554–559, 2000
22. Design of the outer poloidal field coil system for ITER
    IEEE Transactions on Magnetics, vol. 32, no. 4, pp. 2240–2243, 1996
23. Standard-II and extended tests of the Swiss LCT-coil
    IEEE Transactions on Magnetics, vol. 25, no. 2, pp. 1558–1561, 1989