Luigi Nicolais

Articles in Scholarly Journals [Incomplete List]

  1. Biomechanical effects of titanium implants with full arch bridge rehabilitation on a synthetic model of the human jaw
    Acta Biomaterialia, vol. 3, no. 1, pp. 121–126, 2007
  2. Effects of polymer amount and processing conditions on the in vitro behaviour of hybrid titanium dioxide/polycaprolactone composites
    Biomaterials, vol. 28, no. 18, pp. 2801–2809, 2007
  3. Guest editorial to: EUROMECH 453
    Composites Part A: Applied Science and Manufacturing, vol. 37, no. 4, pp. 519–521, 2006
  4. Novel polysaccharides-based viscoelastic formulations for ophthalmic surgery: Rheological characterization
    Biomaterials, vol. 27, no. 29, pp. 5134–5142, 2006
  5. Acoustic and Optical VOCs Sensors Incorporating Carbon Nanotubes
    IEEE Sensors Journal, vol. 6, no. 4, pp. 867–875, 2006
  6. Synthesis of poly(amide-ester)s by microwave methods
    Journal of Applied Polymer Science, vol. 103, no. 3, pp. 1952–1958, 2006
  7. A predictive approach based on the Simha–Somcynsky free-volume theory for the effect of dissolved gas on viscosity and glass transition temperature of polymeric mixtures
    Journal of Polymer Science Part B: Polymer Physics, vol. 44, no. 13, pp. 1863–1873, 2006
  8. Effect of microencapsulated phase change materials on the thermo-mechanical properties of poly(methyl-methacrylate) based biomaterials
    Journal of Materials Science: Materials in Medicine, vol. 17, no. 12, pp. 1219–1226, 2006
  9. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol. 53, no. 8, pp. 1493–1502, 2006
  10. Low-cost all-fiber Bragg grating sensing system for temperature and strain measurements
    Optical Engineering, vol. 44, no. 8, p. 084402, 2005
  11. Poly(lactic acid)/organoclay nanocomposites: Thermal, rheological properties and foam processing
    Journal of Polymer Science Part B: Polymer Physics, vol. 43, no. 6, pp. 689–698, 2005
  12. Reactively Modified Poly(lactic acid): Properties and Foam Processing
    Macromolecular Materials and Engineering, vol. 290, no. 11, pp. 1083–1090, 2005
  13. Comparison of photo-oxidative degradation of polyamide 6,6 films stabilized with HALS and CuCl+KI mixtures
    Polymer, 2005
  14. A 3D analysis of mechanically stressed dentin?adhesive?composite interfaces using X-ray micro-CT
    Biomaterials, vol. 26, no. 3, pp. 257–270, 2005
  15. Response of intestinal cells and macrophages to an orally administered cellulose-PEG based polymer as a potential treatment for intractable edemas
    Biomaterials, vol. 26, no. 19, pp. 4101–4110, 2005
  16. Monitoring by a single fiber Bragg grating of the process induced chemo-physical transformations of a model thermoset
    Sensors and Actuators A: Physical, vol. 113, no. 2, pp. 166–173, 2004
  17. Synthesis and characterization of gold-based nanoscopic additives for polymers
    Composites Part B: Engineering, vol. 35, no. 5, pp. 385–391, 2004
  18. Continuous fibre reinforced polymers as connective tissue replacement
    Composites Science and Technology, vol. 64, no. 6, pp. 861–871, 2004
  19. Isothermal crystallization in PCL/clay nanocomposites investigated with thermal and rheometric methods
    Polymer, vol. 45, no. 26, pp. 8893–8900, 2004
  20. Biomacromolecules, vol. 5, no. 1, pp. 92–96, 2004
  21. Multifunction Fiber Optic Sensing System for Smart Applications
    IEEE/ASME Transactions on Mechatronics, vol. 9, no. 1, pp. 40–49, 2004
  22. Mechanical and leakage behaviour of the dentin – adhesive interface
    Journal of Materials Science: Materials in Medicine, vol. 15, no. 4, pp. 485–492, 2004
  23. Alcohol detection using carbon nanotubes acoustic and optical sensors
    Applied Physics Letters, vol. 85, no. 12, p. 2379, 2004
  24. Optical sensor based on ultrathin films of d-form syndiotactic polystyrene for fast and high resolution detection of chloroform
    Applied Physics Letters, vol. 85, no. 22, p. 5349, 2004
  25. Column: Nanostructured Materials
    Polymer News, vol. 29, no. 6, pp. 184–187, 2004
  26. Column: Nanostructured Materials
    Polymer News, vol. 29, no. 10, pp. 315–318, 2004
  27. Feature Article: Synthesis and Characterization of Gold-Based Nanoscopic Additives for Polymers
    Polymer News, vol. 29, no. 12, pp. 362–367, 2004
  28. Poly(amide-ester)s derived from dicarboxylic acid and aminoalcohol
    Journal of Applied Polymer Science, vol. 95, no. 2, pp. 362–368, 2004
  29. Water and synthetic urine sorption capacity of cellulose-based hydrogels under a compressive stress field
    Journal of Applied Polymer Science, vol. 91, no. 6, pp. 3791–3796, 2004
  30. Synthesis and characterization of gold-based mesoscopic additives for polymers
    Polymer International, vol. 53, no. 12, pp. 2009–2014, 2004
  31. On-line monitoring of Au nanoparticles formation by optical spectroscopy
    The European Physical Journal B, vol. 41, no. 1, pp. 43–48, 2004
  32. Hyaluronic-acid-based semi-interpenetrating materials
    Journal of Biomaterials Science, Polymer Edition, vol. 15, no. 9, pp. 1223–1236, 2004
  33. Preparation and Characterization of a Hydrogel from Low-Molecular Weight Hyaluronic Acid
    Journal of Bioactive and Compatible Polymers, vol. 19, no. 1, pp. 5–15, 2004
  34. Heterogeneous bubble nucleation in PCL/clay nanocomposite foams
    Plastics, Rubber and Composites, vol. 32, no. 7, pp. 313–317, 2003
  35. Mechanical Strength of PET Fibers Treated in Cold Plasma and Thermal Exposed
    Journal of Materials Engineering and Performance, vol. 12, no. 3, pp. 279–287, 2003
  36. Modeling the Oxygen Barrier Properties of Nylon Film Intended for Food Packaging Applications
    Journal of Food Science, vol. 68, no. 6, pp. 2017–2021, 2003
  37. Naringinase Immobilization in Polymeric Films Intended for Food Packaging Applications
    Journal of Food Science, vol. 68, no. 6, pp. 2046–2049, 2003
  38. Modeling the Water Barrier Properties of Nylon Film Intended for Food Packaging Applications
    Journal of Food Science, vol. 68, no. 4, pp. 1334–1340, 2003
  39. Modeling the Lysozyme Release Kinetics from Antimicrobial Films Intended for Food Packaging Applications
    Journal of Food Science, vol. 68, no. 4, pp. 1365–1370, 2003
  40. Biomedical application of a superabsorbent hydrogel for body water elimination in the treatment of edemas
    Journal of Biomedical Materials Research, vol. 67A, no. 3, pp. 1016–1024, 2003
  41. Self-organized liquid-crystalline polyethers obtained by grafting tapered mesogenic groups onto poly(epichlorohydrin): Toward biomimetic ion channels
    Journal of Polymer Science Part A: Polymer Chemistry, vol. 41, no. 19, pp. 2918–2929, 2003
  42. Nanocomposites by melt intercalation based on polycaprolactone and organoclay
    Journal of Polymer Science Part B: Polymer Physics, vol. 41, no. 7, pp. 670–678, 2003
  43. Effect of processing conditions on mechanical and viscoelastic properties of biocomposites
    Journal of Applied Polymer Science, vol. 88, no. 7, pp. 1637–1642, 2003
  44. Introduction of molecular spacers between the crosslinks of a cellulose-based superabsorbent hydrogel: Effects on the equilibrium sorption properties
    Journal of Applied Polymer Science, vol. 90, no. 1, pp. 168–174, 2003
  45. Curing kinetics and chemorheology of epoxy/anhydride system
    Journal of Applied Polymer Science, vol. 90, no. 11, pp. 3012–3019, 2003
  46. Mandibular flexure and stress build-up in mandibular full-arch fixed prostheses supported by osseointegrated implants
    Clinical Oral Implants Research, vol. 14, no. 1, pp. 103–114, 2003
  47. Size-controlled synthesis of thiol-derivatized gold clusters
    Journal of Materials Chemistry, vol. 13, no. 5, pp. 1038–1041, 2003
  48. A universal method for the synthesis of metal and metal sulfide clusters embedded in polymer matrices
    Journal of Materials Chemistry, vol. 13, no. 12, p. 2927, 2003
  49. Optoelectronic refractive index measurements: application to smart processing
    IEEE Sensors Journal, vol. 3, no. 6, pp. 781–787, 2003
  50. Journal of Materials Science: Materials in Medicine, vol. 14, no. 7, pp. 583–594, 2003
  51. Industrial & Engineering Chemistry Research, vol. 42, no. 19, pp. 4398–4405, 2003
  52. Resin flow monitoring in resin film infusion process
    Journal of Materials Processing Technology, vol. 143-144, pp. 687–692, 2003
  53. A general approach to describe the antimicrobial agent release from highly swellable films intended for food packaging applications
    Journal of Controlled Release, vol. 90, no. 1, pp. 97–107, 2003
  54. Modeling the water transport properties of casein-based edible coating
    Journal of Food Engineering, vol. 60, no. 1, pp. 99–106, 2003
  55. Effects of processing conditions on the impregnation of glass fibre mat in extrusion/calendering and film stacking operations
    Composites Science and Technology, vol. 63, no. 15, pp. 2217–2222, 2003
  56. Designing microporous macromolecular hydrogels for biomedical applications: a comparison between two techniques
    Composites Science and Technology, vol. 63, no. 16, pp. 2411–2416, 2003
  57. Thermal behavior and morphological and rheological properties of polypropylene and novel elastomeric ethylene copolymer blends
    Journal of Applied Polymer Science, vol. 86, no. 13, pp. 3430–3439, 2002
  58. Effect of the segmental mobility restriction on the thermoset chemical kinetics
    Journal of Polymer Science Part A: Polymer Chemistry, vol. 40, no. 21, pp. 3757–3770, 2002
  59. Autoclave manufacturing of thick composites
    Polymer Composites, vol. 23, no. 5, pp. 902–910, 2002
  60. Tensile Strength of Radio Frequency Cold Plasma Treated PET Fibers - Part I: Influence of Environmen and Treatment Time
    Journal of Materials Engineering and Performance, vol. 11, no. 6, pp. 659–666, 2002
  61. Analysis of heat transfer in autoclave technology
    Polymer Composites, vol. 22, no. 5, pp. 613–620, 2001
  62. The European Physical Journal B, vol. 24, no. 4, pp. 437–441, 2001
  63. Mechanical strength of tooth fragment reattachment
    Journal of Biomedical Materials Research, vol. 55, no. 4, pp. 629–636, 2001
  64. Polyelectrolyte Membranes Based on Sulfonated Syndiotactic Polystyrene in Its Clathrate Form
    Macromolecular Symposia, vol. 169, no. 1, pp. 293–302, 2001
  65. Prediction of impact properties of polyolefin foams
    Polymer Testing, vol. 20, no. 6, pp. 643–647, 2001
  66. Low temperature magneto-conductivity properties of micro-sized Ag/HD-PE metal/polymers
    The European Physical Journal B, vol. 21, no. 4, pp. 485–489, 2001
  67. Journal of Optics A: Pure and Applied Optics, vol. 3, no. 2, pp. 126–130, 2001
  68. Magnetic and magnetoelastic effects in a composite material of Ni microparticles in a silicone matrix
    Physical Review B, vol. 63, no. 5, 2001
  69. Journal of Materials Science Letters, vol. 20, no. 7, pp. 663–665, 2001
  70. Journal of Materials Science: Materials in Medicine, vol. 12, no. 10/12, pp. 861–864, 2001
  71. Journal of Materials Science: Materials in Medicine, vol. 11, no. 4, pp. 247–253, 2000
  72. Journal of Materials Science: Materials in Medicine, vol. 11, no. 4, pp. 201–206, 2000
  73. Journal of Materials Science Letters, vol. 19, no. 5, pp. 425–427, 2000
  74. Journal of Materials Science: Materials in Medicine, vol. 11, no. 10, pp. 629–636, 2000
  75. Synthesis and Characterization of Saturated and Unsaturated Poly(alkylene tartrate)s and Further Cross-linking
    Journal of Bioactive and Compatible Polymers, vol. 15, no. 1, pp. 60–71, 2000
  76. Polymer-based composite hip prostheses
    Journal of Inorganic Biochemistry, vol. 79, no. 1-4, pp. 97–102, 2000
  77. A novel approach for grinding operation scale-up
    Chemical Engineering Science, vol. 55, no. 8, pp. 1347–1356, 2000
  78. An optoelectronic sensor for cure monitoring in thermoset-based composites
    Sensors and Actuators A: Physical, vol. 84, no. 3, pp. 270–275, 2000
  79. A fiber optic thermoset cure monitoring sensor
    Polymer Composites, vol. 21, no. 4, pp. 523–530, 2000
  80. Composites based on carbon fibers and liquid crystalline epoxy resins, 2 Dynamic-mechanical analysis and fracture toughness behavior
    Macromolecular Chemistry and Physics, vol. 201, no. 18, pp. 2639–2645, 2000
  81. Effect of processing conditions on dimensions of sisal fibers in thermoplastic biodegradable composites
    Journal of Applied Polymer Science, vol. 79, no. 6, pp. 1084–1091, 2000
  82. Preparation and characterization of nano-sized Ag/PVP composites for optical applications
    The European Physical Journal B, vol. 16, no. 1, pp. 11–17, 2000
  83. A simulation of the non-isothermal resin transfer molding process
    Polymer Engineering & Science, vol. 40, no. 12, pp. 2471–2481, 2000
  84. Analysis of acoustic emission signals resulting from fiber breakage in single fiber composites
    Polymer Composites, vol. 20, no. 6, pp. 758–770, 1999
  85. The transport mechanisms of gases through metallized films intended for food packaging applications
    Packaging Technology and Science, vol. 12, no. 6, pp. 261–269, 1999
  86. Biocomposites based on sea algae fibers and biodegradable thermoplastic matrices
    Journal of Applied Polymer Science, vol. 73, no. 4, pp. 583–592, 1999
  87. Cure monitoring of epoxy matrices for composites by ultrasonic wave propagation
    Journal of Applied Polymer Science, vol. 73, no. 10, pp. 1969–1977, 1999
  88. Kinetic study of phenolic resin cure by IR spectroscopy
    Journal of Applied Polymer Science, vol. 74, no. 11, pp. 2703–2715, 1999
  89. Acoustic emission wave propagation in a viscoelastic plate
    Composites Science and Technology, vol. 59, no. 11, pp. 1735–1743, 1999
  90. Long-term behaviour of PEI and PEI-based composites subjected to physical aging
    Composites Science and Technology, vol. 59, no. 13, pp. 1993–2003, 1999
  91. Journal of Materials Science: Materials in Medicine, vol. 10, no. 10/11, pp. 595–600, 1999
  92. RHEOLOGICAL STUDY ON HYALURONIC ACID AND ITS DERIVATIVE SOLUTIONS
    Journal of Macromolecular Science, Part A- Pure and Applied Chemistry, vol. 36, no. 7&8, pp. 991–1000, 1999
  93. Journal of Materials Science: Materials in Medicine, vol. 10, no. 5, pp. 265–268, 1999
  94. Journal of Materials Science: Materials in Medicine, vol. 10, no. 10/11, pp. 671–676, 1999
  95. Journal of Materials Science: Materials in Medicine, vol. 10, no. 2, pp. 65–68, 1999
  96. Journal of Materials Science, vol. 34, no. 8, pp. 1899–1904, 1999
  97. Journal of Materials Science, vol. 34, no. 23, pp. 5683–5687, 1999
  98. Comparison between the polymerization behavior of a new bone cement and a commercial one: modeling and in vitro analysis
    Journal of Materials Science: Materials in Medicine, vol. 9, no. 12, pp. 835–838, 1998
  99. Journal of Materials Science Materials in Medicine, vol. 9, no. 4, pp. 191–196, 1998
  100. Journal of Materials Science Materials in Medicine, vol. 9, no. 6, pp. 317–324, 1998
  101. An acoustic-emission characterization of the failure modes in polymer-composite materials
    Composites Science and Technology, vol. 58, no. 12, pp. 1923–1928, 1998
  102. A phenomenological study of the structural relaxation of an inorganic glass (LiO2SiO)
    Materials Chemistry and Physics, vol. 55, no. 2, pp. 155–159, 1998
  103. In situ real-time study of crosslinking kinetics in thermal and microwave fields
    Polymers for Advanced Technologies, vol. 9, no. 4, pp. 231–243, 1998
  104. Ultrasonic characterization of water sorption in poly(2-hydroxyethyl methacrylate) hydrogels
    Journal of Applied Polymer Science, vol. 67, no. 5, pp. 823–831, 1998
  105. Synthesis and characterization of starch-based polyurethane foams
    Journal of Applied Polymer Science, vol. 68, no. 5, pp. 739–745, 1998
  106. Viscoelastic behavior of composite ligament prostheses
    Journal of Biomedical Materials Research, vol. 42, no. 1, pp. 6–12, 1998
  107. Gas and water vapour transport through polymer based protective materials for stone monuments: Fluorinated polyurethanes
    Materials and Structures, vol. 31, no. 2, pp. 104–110, 1998
  108. New functionalized ethylene/vinyl alcohol co-polymers:synthesis and water vapour transport properties
    Packaging Technology and Science, vol. 10, no. 2, pp. 95–108, 1997
  109. Moisture transport properties of a degradable nylon for food packaging applications
    Packaging Technology and Science, vol. 10, no. 6, pp. 311–330, 1997
  110. The differential effects of poly(2-hydroxyethyl methacrylate) and poly(2-hydroxyethyl methacrylate)/ poly(caprolactone) polymers on cell proliferation and collagen synthesis by human lung fibroblasts
    Journal of Biomedical Materials Research, vol. 34, no. 3, pp. 327–336, 1997
  111. Isothermal crystallization and chain mobility of poly(L-lactide)
    Journal of Applied Polymer Science, vol. 64, no. 5, pp. 911–919, 1997
  112. Capillary extrusion behavior of phenolphthalein poly(ether-ether-sulphone) (PES-C)
    Journal of Applied Polymer Science, vol. 65, no. 5, pp. 951–958, 1997
  113. Resin flow in a pultrusion process
    Polymer Composites, vol. 18, no. 6, pp. 681–686, 1997
  114. The effect of structural parameters on the enthalpy relaxation of an inorganic glass (LiO · 2SiO)
    Materials Chemistry and Physics, vol. 51, no. 1, pp. 64–69, 1997
  115. The Influence of the Thermal History on the Shelf Life of Carbonated Beverages Bottled in Plastic Containers
    Journal of Food Engineering, vol. 34, no. 1, pp. 1–13, 1997
  116. Journal of Materials Science Materials in Medicine, vol. 8, no. 2, pp. 75–83, 1997
  117. Journal of Materials Science, vol. 32, no. 6, pp. 1405–1408, 1997
  118. Journal of Materials Science, vol. 32, no. 4, pp. 1061–1067, 1997
  119. Advanced Performance Materials, vol. 4, no. 3, pp. 257–274, 1997
  120. Analysis of steel fibre pull-out from a cement matrix using video photography
    Cement and Concrete Composites, vol. 18, no. 1, pp. 3–8, 1996
  121. Tension-tension fatigue failure behaviour of poly(phenylene ether ketone) (PEK-C)
    Polymer, vol. 37, no. 11, pp. 2103–2111, 1996
  122. Synthesis and characterization of a new interpenetrated poly(2-hydroxyethylmethacrylate)—gelatin composite polymer
    Biomaterials, vol. 17, no. 15, pp. 1459–1467, 1996
  123. Effect of physical aging on phenolphthalein polyethersulfone/poly(phenylene sulfide) blend. I. Mechanical properties
    Journal of Applied Polymer Science, vol. 59, no. 7, pp. 1159–1166, 1996
  124. Water sorption in cellulose-based hydrogels
    Journal of Applied Polymer Science, vol. 60, no. 13, pp. 2403–2407, 1996
  125. Cure kinetics of neat and carbon-fiber-reinforced TGDDM/DDS epoxy systems
    Journal of Applied Polymer Science, vol. 61, no. 6, pp. 1025–1037, 1996
  126. Low Molecular Weight Molecules Diffusion in Advanced Polymers for Food Packaging Applications
    Polymers for Advanced Technologies, vol. 7, no. 5-6, pp. 409–417, 1996
  127. Wear effects in retrieved acetabular UHMW-PE cups
    Journal of Materials Science: Materials in Medicine, vol. 7, no. 12, pp. 723–729, 1996
  128. Characterization of glass ionomers for surgical applications
    Journal of Materials Science: Materials in Medicine, vol. 7, no. 7, pp. 431–438, 1996
  129. Structure-mechanical properties relationship of natural tendons and ligaments
    Journal of Materials Science: Materials in Medicine, vol. 7, no. 9, pp. 525–530, 1996
  130. Viscoelastic properties modulation of a novel autocrosslinked hyaluronic acid polymer
    Journal of Materials Science: Materials in Medicine, vol. 7, no. 11, pp. 695–698, 1996
  131. A method for the preparation of PMMA-SiO2 nanocomposites with high homogeneity
    Applied Composite Materials, vol. 2, no. 6, pp. 385–393, 1996
  132. Impedance spectroscopy of reactive polymers. 3. Correlations between dielectric, spectroscopic, and rheological properties during cure of a trifunctional epoxy resin
    Journal of Polymer Science Part B: Polymer Physics, vol. 34, no. 2, pp. 379–388, 1996
  133. Composite hydrogels for intervertebral disc prostheses
    Journal of Materials Science: Materials in Medicine, vol. 7, no. 5, pp. 251–254, 1996
  134. Nonlinear viscoelasticity of Hydrothane®
    Journal of Materials Science: Materials in Medicine, vol. 7, no. 5, pp. 305–307, 1996
  135. Viscoelastic evaluation of different knee osteoarthritis therapies
    Journal of Materials Science: Materials in Medicine, vol. 6, no. 3, pp. 130–137, 1995
  136. Cure behaviour of visible light activated dental composites
    Journal of Materials Science: Materials in Medicine, vol. 6, no. 3, pp. 155–160, 1995
  137. Cure behaviour of visible light activated dental composites
    Journal of Materials Science: Materials in Medicine, vol. 6, no. 3, pp. 161–166, 1995
  138. In situ composite: Phenolphthalein polyethersulfone?thermotropic liquid crystalline polymer blends
    Polymer Engineering and Science, vol. 35, no. 8, pp. 658–665, 1995
  139. Preparation of ?-alumina precursors for metal reinforcement
    Applied Composite Materials, vol. 2, no. 4, pp. 245–255, 1995
  140. Erosion of reinforcement particles in SiC/aluminum composites
    Applied Composite Materials, vol. 1, no. 6, pp. 449–463, 1995
  141. Physical aging of high-performance thermoplastics: Enthalpy relaxation in PEK-C and PES-C
    Journal of Applied Polymer Science, vol. 57, no. 8, pp. 989–995, 1995
  142. Macromolecules, vol. 28, no. 8, pp. 2797–2806, 1995
  143. Macromolecules, vol. 28, no. 14, pp. 4785–4794, 1995
  144. Moisture-Matrix Interactions in Polymer Based Composite Materials
    Oil & Gas Science and Technology, vol. 50, no. 4, pp. 551–571, 1995
  145. The kinetics of volume relaxation and related property changes during physical aging of poly(ether ether ketone) (PEEK)
    Composite Structures, vol. 27, no. 1-2, pp. 45–49, 1994
  146. Physical and chemical decay of prosthetic ACL after implantation
    Clinical Materials, vol. 15, no. 1, pp. 29–36, 1994
  147. In vivo induction of macrophage Ia antigen (MHC class II) expression by biomedical polymers in the cage implant system
    Journal of Biomedical Materials Research, vol. 28, no. 5, pp. 635–646, 1994
  148. Poly(3-hydroxybutyrate)-co-(3-hydroxyvalerate)/Poly-L-lactide blends: Thermal and mechanical properties
    Journal of Applied Polymer Science, vol. 54, no. 10, pp. 1525–1535, 1994
  149. Degradation of SiC particles in aluminium-based composites
    Journal of Materials Science, vol. 29, no. 19, pp. 4967–4974, 1994
  150. Anomalous diffusion in poly-ether-ether-ketone
    Chemical Engineering Science, vol. 49, no. 5, pp. 633–644, 1994
  151. Uniaxial and biaxial flexural fatigue of glass reinforced inter-penetrated network polymer composites
    Applied Composite Materials, vol. 1, no. 1, pp. 19–33, 1994
  152. Flexural fatigue of short glass fiber reinforced a blend of polyphenylene ether ketone and polyphenylene sulfide
    Applied Composite Materials, vol. 1, no. 3, pp. 183–195, 1994
  153. Stability of nickel coatings on carbon fiber preforms: A SEM investigation
    Applied Composite Materials, vol. 1, no. 3, pp. 231–245, 1994
  154. Superficial modification of SiC powder by chemical oxidation
    Applied Composite Materials, vol. 1, no. 2, pp. 155–166, 1994
  155. Impedance spectroscopy of reactive polymers. 1
    Journal of Polymer Science Part B: Polymer Physics, vol. 32, no. 15, pp. 2519–2527, 1994
  156. Principal features of structural relaxation in glassy polymers. A Review
    Polymer Engineering and Science, vol. 34, no. 5, pp. 381–389, 1994
  157. Processing effects on poly(ethylene terephthalate) from bottle scraps
    Polymer Engineering and Science, vol. 34, no. 15, pp. 1219–1223, 1994
  158. Comparison of kinetic and rheological evaluation of gel time for an amine-epoxy system
    Polymer, vol. 34, no. 1, pp. 207–209, 1993
  159. The influence of a copolymer as adhesion promoter for polycarbonate and liquid crystalline polymer blends
    Journal of Applied Polymer Science, vol. 50, no. 1, pp. 83–94, 1993
  160. Gas-transport properties of ethylene/propylene/carbon monoxide polyketone terpolymer
    Journal of Applied Polymer Science, vol. 50, no. 7, pp. 1261–1268, 1993
  161. Hydrogels as an interface between bone and an implant
    Biomaterials, vol. 14, no. 14, pp. 1098–1104, 1993