Personal Home Page

http://www.mme.uwaterloo.ca/research/brochure/sullivan-br.html

Articles in Scholarly Journals [Incomplete List]

1. Anomalous moisture diffusion in an epoxy adhesive detected by magnetic resonance imaging
   Journal of Applied Polymer Science, 2008
2. Comparison of enthalpy relaxation between two different molecular masses of a bisphenol-A polycarbonate
   Journal of Thermal Analysis and Calorimetry, vol. 81, no. 1, pp. 169–177, 2005
3. Moisture effects on FM300 structural film adhesive: Stress relaxation, fracture toughness, and dynamic mechanical analysis
   Journal of Applied Polymer Science, vol. 95, no. 5, pp. 1285–1294, 2005
4. Distortion-free single point imaging of multi-layered composite sandwich panel structures
   Journal of Magnetic Resonance, vol. 168, no. 1, pp. 164–174, 2004
5. An alternative model for predicting the cure kinetics of a high temperature cure epoxy adhesive
   Polymer Engineering & Science, vol. 43, no. 1, pp. 14–25, 2003
6. Mechanical relaxations in heat-aged polycarbonate. Part I: Comparison between two molecular weights
   Polymer Engineering & Science, vol. 43, no. 2, pp. 369–382, 2003
7. Mechanical relaxations in heat-aged polycarbonate. Part II: Statistical analysis of low-molecular weight data
   Polymer Engineering & Science, vol. 43, no. 2, pp. 383–397, 2003
8. Residual stress development during the composite patch bonding process: measurement and modeling
   Composites Part A: Applied Science and Manufacturing, vol. 33, no. 2, pp. 277–288, 2002
9. Simultaneous strain and temperature monitoring of the composite cure with a Brillouin-scattering-based distributed sensor
   Optical Engineering, vol. 41, no. 7, p. 1496, 2002
10. Stress Relaxation Profiles of Moldedand Extruded ThermoplasticsUsing Dynamic Mechanical Analysis
    Journal of Reinforced Plastics and Composites, vol. 20, no. 13, pp. 1100–1111, 2001
11. Finite element and experimental studies on single-lap balanced joints in tension
    International Journal of Adhesion and Adhesives, vol. 21, no. 3, pp. 211–220, 2001
12. Stiffness behaviour due to fracture in adhesively bonded composite-to-aluminum joints I. Theoretical model
    International Journal of Adhesion and Adhesives, vol. 20, no. 1, pp. 39–45, 2000
13. Stiffness behaviour due to fracture in adhesively bonded composite-to-aluminum joints II. Experimental
    International Journal of Adhesion and Adhesives, vol. 20, no. 1, pp. 47–58, 2000
14. Journal of Thermal Analysis and Calorimetry, vol. 60, no. 2, pp. 377–390, 2000
15. Guidelines for performing storage modulus measurements using the TA Instruments DMA 2980 three-point bend mode I. Amplitude effects
    Polymer Testing, vol. 19, no. 2, pp. 155–164, 2000
16. Guidelines for performing storage modulus measurements using the TA Instruments DMA 2980 three-point bend mode II. Contact stresses and machine compliance
    Polymer Testing, vol. 19, no. 3, pp. 239–250, 2000
17. Selecting Concrete Pavement Joint Sealants. I: Proposed Test Protocol
    Journal of Materials in Civil Engineering, vol. 11, no. 4, p. 302, 1999
18. Selecting Concrete Pavement Joint Sealants. II: Case Study
    Journal of Materials in Civil Engineering, vol. 11, no. 4, p. 309, 1999
19. Nonlinear finite element analysis of stress and strain distributions across the adhesive thickness in composite single-lap joints
    Composite Structures, vol. 46, no. 4, pp. 395–403, 1999
20. Detection of debonding in composite-aluminum joints using gamma-ray Compton scattering
    NDT & E International, vol. 31, no. 2, pp. 99–103, 1998
21. Delamination Initiation Around Cut Holes in Symmetric Laminates: Effects of PET Film Interleaving
    Materials and Manufacturing Processes, vol. 12, no. 5, pp. 911–924, 1997
22. The Influence of Thermoplastic Film Interleaving on the Interlaminar Shear Strength and Mode I Fracture of Laminated Composites
    Journal of Engineering Materials and Technology, vol. 118, no. 3, p. 302, 1996
23. Erosion of impact-notched holes in GFRP composites
    Wear, vol. 176, no. 1, pp. 81–88, 1994
24. Effects of bromination and hydrolysis treatments on the morphology and tensile properties of Kevlar-29 fibres
    Journal of Materials Science Letters, vol. 13, no. 5, pp. 305–309, 1994
25. HIP processing of Ti_Al intermetallic using blended elemental powders
    Journal of Materials Processing Technology, vol. 38, no. 1-2, pp. 1–13, 1993