Adib Becker

Personal Home Page

http://www.nottingham.ac.uk/school3m/staff-look-up/staff-by-role.php?id=NTE0ODQw&page_var=personal

Articles in Scholarly Journals [Incomplete List]

  1. Virtual reality simulation of surgery with haptic feedback based on the boundary element method
    Computers & Structures, vol. 85, no. 7-8, pp. 331–339, 2007
  2. Force–deflection analysis of offset indentations on pressurised pipes
    International Journal of Pressure Vessels and Piping, vol. 84, no. 6, pp. 368–377, 2007
  3. Elastic–plastic analysis of offset indentations on unpressurised pipes
    International Journal of Solids and Structures, vol. 44, no. 2, pp. 399–418, 2007
  4. Numerical simulation of P91 pipe welding including the effects of solid-state phase transformation on residual stresses
    Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 221, no. 4, pp. 213–224, 2007
  5. Finite-element creep damage analyses of P91 pipes
    International Journal of Pressure Vessels and Piping, vol. 83, no. 11-12, pp. 853–863, 2006
  6. Residual stress simulation in thin and thick-walled stainless steel pipe welds including pipe diameter effects
    International Journal of Pressure Vessels and Piping, vol. 83, no. 11-12, pp. 864–874, 2006
  7. An advanced FEA based force induced error compensation strategy in milling
    International Journal of Machine Tools and Manufacture, vol. 46, no. 5, pp. 542–551, 2006
  8. A virtual reality surgery simulation of cutting and retraction in neurosurgery with force-feedback
    Computer Methods and Programs in Biomedicine, vol. 84, no. 1, pp. 11–18, 2006
  9. Failure estimation of TIG butt-welded Inco718 sheets at 620°C under creep and plasticity conditions
    Computational Materials Science, vol. 35, no. 1, pp. 35–41, 2006
  10. Elastic–plastic response of unpressurised pipes subjected to axially-long radial indentation
    International Journal of Mechanical Sciences, vol. 47, no. 12, pp. 1949–1971, 2005
  11. Some key effects on the failure assessment of weld repairs in CrMoV pipelines using continuum damage modelling
    Engineering Failure Analysis, vol. 12, no. 6, pp. 839–850, 2005
  12. Influence of geometry change on creep failure life of 90° pressurised pipe bends with no initial ovality
    International Journal of Pressure Vessels and Piping, vol. 82, no. 7, pp. 509–516, 2005
  13. Prediction of force–deflection behaviour of pressurised pipes subjected to axially long radial indentation
    International Journal of Pressure Vessels and Piping, vol. 82, no. 8, pp. 625–637, 2005
  14. Residual stress simulation in welded sections of P91 pipes
    Journal of Materials Processing Technology, 2005
  15. Use of life and strain fraction rules for creep life prediction of pressurized pipe components undergoing geometry change
    The Journal of Strain Analysis for Engineering Design, vol. 40, no. 4, pp. 385–394, 2005
  16. Boundary element analysis of contact problems using inverse techniques—linear and quadratic elements
    The Journal of Strain Analysis for Engineering Design, vol. 39, no. 4, pp. 371–382, 2004
  17. Creep properties and failure assessment of new and fully repaired P91 pipe welds at 923 K
    Proceedings of the I MECH E Part L Journal of Materials:Design and Applications, vol. 218, no. 3, pp. 211–222, 2004
  18. A flexible force model for end milling of low-rigidity parts
    Journal of Materials Processing Technology, vol. 153-154, pp. 134–138, 2004
  19. Modelling and simulation environment for machining of low-rigidity components
    Journal of Materials Processing Technology, vol. 153-154, pp. 67–73, 2004
  20. Milling error prediction and compensation in machining of low-rigidity parts
    International Journal of Machine Tools and Manufacture, vol. 44, no. 15, pp. 1629–1641, 2004
  21. Life prediction of repaired welds in a pressurised CrMoV pipe with incorporation of initial damage
    International Journal of Pressure Vessels and Piping, vol. 81, no. 1, pp. 1–12, 2004
  22. Effect of geometry change on the creep failure life of a thick-walled CrMoV pipe with a circumferential weldment
    International Journal of Pressure Vessels and Piping, vol. 81, no. 4, pp. 363–371, 2004
  23. Boundary element formulation for two-dimensional creep problems using isoparametric quadratic elements
    Computers & Structures, vol. 81, no. 16, pp. 1611–1618, 2003
  24. Steady-state creep reference rupture stresses for internally pressurised pipes for use in life prediction
    International Journal of Pressure Vessels and Piping, vol. 79, no. 2, pp. 135–143, 2002
  25. Benchmarks for finite element analysis of creep continuum damage mechanics
    Computational Materials Science, vol. 25, no. 1-2, pp. 34–41, 2002
  26. A validation of the three-dimensional finite element contact method for use with Curvic couplings
    Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 216, no. 2, pp. 63–75, 2002
  27. Development of new inverse boundary element techniques in photoelasticity
    The Journal of Strain Analysis for Engineering Design, vol. 36, no. 3, pp. 253–264, 2001
  28. Effect of weld angle and axial load on the creep failure behaviour of an internally pressurised thick walled CrMoV pipe weld
    International Journal of Pressure Vessels and Piping, vol. 78, no. 5, pp. 365–372, 2001
  29. Creep crack growth in welds: a damage mechanics approach to predicting initiation and growth of circumferential cracks
    International Journal of Pressure Vessels and Piping, vol. 78, no. 11-12, pp. 765–771, 2001
  30. Comparison of the creep and damage failure prediction of the new, service-aged and repaired thick-walled circumferential CrMoV pipe welds using material properties at 640°C
    International Journal of Pressure Vessels and Piping, vol. 77, no. 7, pp. 389–398, 2000
  31. Life assessment of weld repairs in 1/2Cr1/2Mo1/4V main steam pipes using the finite element method
    The Journal of Strain Analysis for Engineering Design, vol. 35, no. 5, pp. 359–372, 2000
  32. A three-dimensional finite element investigation of the bolt stresses in an aero-engine Curvic coupling under a blade release condition
    Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 214, no. 4, pp. 231–245, 2000
  33. Failure prediction for multi-material creep test specimens using a steady-state creep rupture stress
    International Journal of Mechanical Sciences, vol. 42, no. 3, pp. 401–423, 2000
  34. The numerical treatment of local variables in three-dimensional frictional contact problems using the boundary element method
    Computers & Structures, vol. 71, no. 4, pp. 383–395, 1999
  35. Frictional contact analysis under tangential loading using a local axes boundary element formulation
    International Journal of Mechanical Sciences, vol. 41, no. 4-5, pp. 419–436, 1999
  36. A quadratic boundary element formulation for three-dimensional contact problems with friction
    The Journal of Strain Analysis for Engineering Design, vol. 34, no. 4, pp. 235–251, 1999
  37. International Journal of Fracture, vol. 92, no. 1, pp. 39–54, 1998
  38. FATIGUE, CREEP AND CREEP/FATIGUE BEHAVIOUR OF A NICKEL BASE SUPERALLOY AT 700°C
    Fatigue & Fracture of Engineering Materials and Structures, vol. 20, no. 9, pp. 1295–1303, 1997
  39. Creep Continuum Damage Constitutive Equations for the Base, Weld and Heat-Affected Zone Materials of a Service-Aged {1 over 2}cr{1 over 2}mo{1 over 4}v:2{1 over 4}cr1mo Multipass Weld at 640 °c
    The Journal of Strain Analysis for Engineering Design, vol. 32, no. 4, pp. 273–287, 1997
  40. Boundary element analysis of heat conduction and thermal stresses in contact problems using independent meshing
    Computers & Structures, vol. 59, no. 4, pp. 729–741, 1996
  41. Prediction of creep failure in aeroengine materials under multi-axial stress states
    International Journal of Mechanical Sciences, vol. 38, no. 4, pp. 385–403, 1996
  42. Analysis of the impression creep test method using a rectangular indenter for determining the creep properties in welds
    International Journal of Mechanical Sciences, vol. 38, no. 10, pp. 1089–1102, 1996
  43. An assessment of the crack tip opening displacement criterion for predicting creep crack growth
    International Journal of Fracture, vol. 77, no. 1, pp. 29–40, 1996
  44. Contact mechanics analysis of frictional slip of inclusions embedded in dissimilar matrices using the boundary element method
    The Journal of Strain Analysis for Engineering Design, vol. 30, no. 4, pp. 245–255, 1995
  45. Numerical analysis of creep in components
    The Journal of Strain Analysis for Engineering Design, vol. 29, no. 3, pp. 185–192, 1994
  46. Three benchmark examples for frictional contact modelling using finite element and boundary elements methods
    The Journal of Strain Analysis for Engineering Design, vol. 28, no. 4, pp. 293–301, 1993
  47. Interpretation of impression creep data using a reference stress approach
    International Journal of Mechanical Sciences, vol. 35, no. 6, pp. 451–462, 1993
  48. A new boundary element approach for contact problems with friction
    International Journal for Numerical Methods in Engineering, vol. 36, no. 15, pp. 2625–2642, 1993
  49. Axial cracks in pressurised eroded autofrettaged thick cylinders
    International Journal of Fracture, vol. 63, no. 2, pp. 113–134, 1993
  50. Independent meshing of contacting surfaces using fictitious nodes in boundary element analysis
    Computers & Structures, vol. 48, no. 5, pp. 787–801, 1993