Jan Baeyens

Articles in Scholarly Journals [Incomplete List]

  1. Peroxidation enhances the biogas production in the anaerobic digestion of biosolids
    Journal of Hazardous Materials, vol. 146, no. 3, pp. 577–581, 2007
  2. Enhancing the use of waste activated sludge as bio-fuel through selectively reducing its heavy metal content
    Journal of Hazardous Materials, vol. 144, no. 3, pp. 703–707, 2007
  3. Investigation of operational parameters for an industrial CFB combustor of coal, biomass and sludge
    China Particuology, vol. 5, no. 4, pp. 247–254, 2007
  4. Solids mixing in the riser of a circulating fluidized bed
    Chemical Engineering Science, vol. 62, no. 8, pp. 2139–2153, 2007
  5. Spray-agglomeration of NPK-fertilizer in a rotating drum granulator
    Powder Technology, vol. 163, no. 3, pp. 188–195, 2006
  6. Energy use of biogas hampered by the presence of siloxanes
    Energy Conversion and Management, vol. 47, no. 13-14, pp. 1711–1722, 2006
  7. Ultrasonic treatment of waste activated sludge
    Environmental Progress, vol. 25, no. 2, pp. 121–128, 2006
  8. Reducing the Heavy Metal Content of Sewage Sludge by Advanced Sludge Treatment Methods
    Environmental Engineering Science, vol. 23, no. 6, pp. 994–999, 2006
  9. The Analysis of the Total Sulphur Content of Wastewater Treatment Sludge by ICP-OES
    Environmental Engineering Science, vol. 23, no. 6, pp. 904–907, 2006
  10. The Use of Ultrasonics in the Treatment of Waste Activated Sludge
    Chinese Journal of Chemical Engineering, vol. 14, no. 1, pp. 105–113, 2006
  11. Heat Transfer from a Single Tube to the Flowing Gas-Solid Suspension in a CFB Riser
    Heat Transfer Engineering, vol. 27, no. 6, pp. 66–70, 2006
  12. An analysis of the environmental management elements related to the improvements of the drying kinetics of waste activated sludge by Fenton peroxidation
    International Journal of Environmental Technology and Management, vol. 5, no. 4, p. 378, 2005
  13. Fenton peroxidation improves the drying performance of waste activated sludge
    Journal of Hazardous Materials, vol. 117, no. 2-3, pp. 161–170, 2005
  14. Theoretical assessment of the catalytic (Pt/TiO) oxidation of formaldehyde at ambient temperature
    Catalysis Communications, vol. 6, no. 12, pp. 793–795, 2005
  15. Immobilisation behaviour of biomolecules in mesoporous silica materials
    Catalysis Communications, vol. 6, no. 9, pp. 591–595, 2005
  16. Using mesoporous silica materials to immobilise biocatalysis-enzymes
    Catalysis Communications, vol. 6, no. 4, pp. 307–311, 2005
  17. Catalytic combustion of volatile organic compounds
    Journal of Hazardous Materials, vol. 109, no. 1-3, pp. 113–139, 2004
  18. Advanced sludge treatment affects extracellular polymeric substances to improve activated sludge dewatering
    Journal of Hazardous Materials, vol. 106, no. 2-3, pp. 83–92, 2004
  19. Removal of PCDD/F from flue gases in fixed or moving bed adsorbers
    Waste Management, vol. 24, no. 1, pp. 37–42, 2004
  20. Thermal degradation of PMMA in fluidised beds
    Waste Management, vol. 24, no. 8, pp. 849–857, 2004
  21. The potential of advanced treatment methods for sewage sludge
    Management of Environmental Quality: An International Journal, vol. 15, no. 1, pp. 9–16, 2004
  22. Pulse jet cleaning of rigid filters: a literature review and introduction to process modelling
    Filtration & Separation, vol. 41, no. 5, pp. 26–33, 2004
  23. A review of classic Fenton's peroxidation as an advanced oxidation technique
    Journal of Hazardous Materials, vol. 98, no. 1-3, pp. 33–50, 2003
  24. A review of thermal sludge pre-treatment processes to improve dewaterability
    Journal of Hazardous Materials, vol. 98, no. 1-3, pp. 51–67, 2003
  25. Hot acid hydrolysis as a potential treatment of thickened sewage sludge
    Journal of Hazardous Materials, vol. 98, no. 1-3, pp. 275–293, 2003
  26. Environmental Science & Technology, vol. 37, no. 6, pp. 1219–1224, 2003
  27. Alkaline thermal sludge hydrolysis
    Journal of Hazardous Materials, vol. 97, no. 1-3, pp. 295–314, 2003
  28. Pilot-scale peroxidation (H2O2) of sewage sludge
    Journal of Hazardous Materials, vol. 98, no. 1-3, pp. 91–106, 2003
  29. The inhibitory effects of heavy metals and organic compounds on the net maximum specific growth rate of the autotrophic biomass in activated sludge
    Journal of Hazardous Materials, vol. 100, no. 1-3, pp. 271–283, 2003
  30. VOC-air separations using gas membranes
    Journal of Chemical Technology & Biotechnology, vol. 78, no. 2-3, pp. 294–297, 2003
  31. Adsorption of dioxins and furans from flue gases in an entrained flow or fixed/moving bed reactor
    Journal of Chemical Technology & Biotechnology, vol. 78, no. 2-3, pp. 213–219, 2003
  32. Combustion of chlorinated hydrocarbons in catalyst-coated sintered metal fleece reactors
    Journal of Chemical Technology & Biotechnology, vol. 78, no. 2-3, pp. 167–172, 2003
  33. Industrial & Engineering Chemistry Research, vol. 41, no. 24, pp. 5983–5989, 2002
  34. Gas fluidized beds operating at high velocities: a critical review of occurring regimes
    Powder Technology, vol. 119, no. 2-3, pp. 269–291, 2001
  35. Overall solids movement and solids residence time distribution in a CFB-riser
    Chemical Engineering Science, vol. 55, no. 19, pp. 4101–4116, 2000
  36. Cleaning of hot calciner exhaust gas by low-density ceramic filters
    Powder Technology, vol. 111, no. 3, pp. 240–244, 2000
  37. Assessment of the Design Parameters for Wastewater Treatment by Reverse Osmosis
    Water Science and Technology, vol. 40, no. 4-5, pp. 269–276, 1999
  38. Erratum
    Powder Technology, vol. 101, no. 3, p. 296, 1999
  39. Segregation by size difference in gas fluidized beds
    Powder Technology, vol. 98, no. 2, pp. 139–150, 1998
  40. Modelling reverse osmosis by irreversible thermodynamics
    Separation and Purification Technology, vol. 13, no. 2, pp. 117–128, 1998
  41. Elutriation of fines from gas fluidized beds: mechanisms of elutriation and effect of freeboard geometry
    Powder Technology, vol. 92, no. 1, pp. 35–46, 1997
  42. The fluidized bed pyrolysis of shredded tyres: the influence of carbon particles, humidity, and temperature on the hydrodynamics
    Powder Technology, vol. 93, no. 3, pp. 283–290, 1997
  43. Macroscopic fluid flow conditions in spiral-wound membrane elements
    Desalination, vol. 110, no. 3, pp. 287–299, 1997
  44. Modeling osmotic pressures for aqueous solutions for 2-1 and 2-2 electrolytes
    Desalination, vol. 109, no. 1, pp. 57–65, 1997
  45. Modeling dissolved air flotation
    Water Environment Research, vol. 68, no. 6, pp. 1061–1075, 1996
  46. Pneumatic drying: the use of large-scale experimental data in a design procedure
    Powder Technology, vol. 83, no. 2, pp. 139–148, 1995
  47. Elutriation of fines from gas fluidized beds of Geldart A-type powders — effect of adding superfines
    Powder Technology, vol. 71, no. 1, pp. 71–80, 1992
  48. Effect of operating temperature on minimum fluidization velocity
    Powder Technology, vol. 67, no. 2, pp. 217–220, 1991
  49. The design of distributors for gas-fluidized beds
    Powder Technology, vol. 42, no. 1, pp. 67–78, 1985
  50. Segregation in beds of large particles at high velocities
    Powder Technology, vol. 30, no. 2, pp. 195–205, 1981
  51. An investigation into slugging fluidized beds
    Chemical Engineering Science, vol. 29, no. 1, pp. 255–265, 1974