Personal Home Page

http://compeng.hud.ac.uk/senglab/

Articles in Scholarly Journals [Incomplete List]

1. Influence of femoral stem surface finish on the apparent static shear strength at the stem–cement interface
   Journal of the Mechanical Behavior of Biomedical Materials, vol. 1, no. 1, pp. 96–104, 2008
2. Linear feature extraction based on complex ridgelet transform
   Wear, vol. 264, no. 5-6, pp. 428–433, 2008
3. The development of user-friendly software measurement standards for surface topography software assessment
   Wear, vol. 264, no. 5-6, pp. 389–393, 2008
4. Micromechanicalversus chemical bonding between CoCr alloys and methacrylate resins
   Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 81B, no. 2, pp. 351–357, 2007
5. Feature extraction for structured surface based on surface networks and edge detection
   Materials Science in Semiconductor Processing, vol. 9, no. 1-3, pp. 210–214, 2006
6. Recent advances in traceable nanoscale dimension and force metrology in the UK
   Measurement Science and Technology, vol. 17, no. 3, pp. 467–476, 2006
7. Investigation of some critical aspects of on-line surface measurement by a wavelength-division-multiplexing technique
   Measurement Science and Technology, vol. 17, no. 3, pp. 483–487, 2006
8. Surface integrity of provisional resin materials
   Measurement Science and Technology, vol. 17, no. 3, pp. 584–591, 2006
9. A metrology solution for the orthopaedic industry
   Journal of Physics: Conference Series, vol. 13, pp. 316–319, 2005
10. The use of advanced 3D surface metrology for the characterisation of epi-wafers and Si structures
    physica status solidi (c), vol. 2, no. 4, pp. 1251–1258, 2005
11. Wear ranking of hard on hard bearings for prosthetic hip joints
    Wear, vol. 257, no. 12, pp. 1208–1212, 2004
12. Third generation wavelet for the extraction of morphological features from micro and nano scalar surfaces
    Wear, vol. 257, no. 12, pp. 1235–1240, 2004
13. Effect of EDM process parameters on 3D surface topography
    Journal of Materials Processing Technology, vol. 148, no. 2, pp. 155–164, 2004
14. In Vivo surface wear mechanisms of femoral components of cemented total hip arthroplasties the influence of wear mechanism on clinical outcome
    The Journal of Arthroplasty, vol. 19, no. 1, pp. 88–101, 2004
15. Calibration of step heights and roughness measurements with atomic force microscopes
    Precision Engineering, vol. 27, no. 1, pp. 91–98, 2003
16. The characterisation of grinding wheels using 3D surface measurement techniques
    Journal of Materials Processing Technology, vol. 127, no. 2, pp. 234–237, 2002
17. A contribution to the debate on surface classifications?random, systematic, unstructured, structured and engineered
    International Journal of Machine Tools and Manufacture, vol. 41, no. 13-14, pp. 2039–2044, 2001
18. The effects of operational parameters on surface characteristics of the ballised material
    International Journal of Machine Tools and Manufacture, vol. 41, no. 13-14, pp. 2071–2078, 2001
19. Comparison study of the biorthogonal spline wavelet filtering for areal rough surfaces
    International Journal of Machine Tools and Manufacture, vol. 41, no. 13-14, pp. 2103–2111, 2001
20. Lifting wavelet for three-dimensional surface analysis
    International Journal of Machine Tools and Manufacture, vol. 41, no. 13-14, pp. 2163–2169, 2001
21. Morphological assessment of in vivo wear of orthopaedic implants using multiscalar wavelets
    Wear, vol. 250, no. 1-12, pp. 217–221, 2001
22. Application of the lifting wavelet to rough surfaces
    Precision Engineering, vol. 25, no. 2, pp. 83–89, 2001
23. A Comparative Study on the Three-Dimensional Surface Topography for the Polished Surface of Femoral Head
    The International Journal of Advanced Manufacturing Technology, vol. 16, no. 8, pp. 564–570, 2000
24. Journal of Materials Science: Materials in Medicine, vol. 11, no. 4, pp. 235–246, 2000
25. Effect of secondary processing on EDM surfaces
    Surface Engineering, vol. 16, no. 6, pp. 501–505, 2000
26. Three-dimensional surface characterization for orthopaedic joint prostheses
    Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 213, no. 1, pp. 49–68, 1999
27. Stiffness analysis of adhesive bonded Tee joints
    International Journal of Adhesion and Adhesives, vol. 19, no. 4, pp. 315–320, 1999
28. The 3-D characterisation of the surface topography of the ballizing process
    International Journal of Machine Tools and Manufacture, vol. 38, no. 5-6, pp. 437–444, 1998
29. Factors affecting the cutting ability of sonic files
    International Endodontic Journal, vol. 29, no. 3, pp. 173–178, 1996
30. Nanometres to micrometres: three-dimensional surface measurement in bio-engineering
    Surface and Coatings Technology, vol. 71, no. 2, pp. 69–81, 1995
31. Application of 3-D topography to bio-engineering
    International Journal of Machine Tools and Manufacture, vol. 35, no. 2, pp. 219–229, 1995
32. Dental hard tissue cutting characteristics of an ultrasonic drill
    International Journal of Machine Tools and Manufacture, vol. 35, no. 2, pp. 339–343, 1995
33. The measurement of the pile-up topography of hardness indentations
    Tribology International, vol. 27, no. 2, pp. 69–79, 1994
34. Determination of proper frequency bandwidth for 3D topography measurement using spectral analysis. Part I: isotropic surfaces
    Wear, vol. 166, no. 2, pp. 221–232, 1993
35. Three-dimensional characterization of indentation topography: visual characterization
    Wear, vol. 159, no. 2, pp. 207–221, 1992