Shao_Yun Fu

Articles in Scholarly Journals [Incomplete List]

  1. Preparation and cryogenic mechanical properties of epoxy resins modified by poly(ethersulfone)
    Journal of Polymer Science Part A: Polymer Chemistry, vol. 46, no. 2, pp. 612–624, 2008
  2. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites
    Composites Part B: Engineering, vol. 39, no. 6, pp. 933–961, 2008
  3. Simultaneous improvements in the cryogenic tensile strength, ductility and impact strength of epoxy resins by a hyperbranched polymer
    Polymer, vol. 49, no. 13-14, pp. 3168–3175, 2008
  4. Templated Silica Tubes with High Aspect Ratios as Effective Fillers for Enhancing the Overall Performance of Polyimide Films
    Chemistry of Materials, vol. 20, no. 3, pp. 1090–1098, 2008
  5. Facile Synthesis of Highly Transparent Polymer Nanocomposites by Introduction of Core–Shell Structured Nanoparticles
    Chemistry of Materials, vol. 20, no. 8, pp. 2637–2643, 2008
  6. Anomalous ferromagnetic behavior of CuO nanorods synthesized via hydrothermal method
    Solid State Communications, vol. 141, no. 8, pp. 431–435, 2007
  7. Preparation and mechanical properties of modified epoxy resins with flexible diamines
    Polymer, vol. 48, no. 1, pp. 302–310, 2007
  8. High-yield synthesis and characterization of monodisperse sub-microsized CoFe2O4 octahedra
    Journal of Solid State Chemistry, vol. 180, no. 2, pp. 461–466, 2007
  9. Mass synthesis of nanocrystalline spinel ferrites by a polymer-pyrolysis route
    Materials Science and Engineering: C, vol. 27, no. 4, pp. 750–755, 2007
  10. High-yield synthesis of dendritic Ni nanostructures by hydrothermal reduction
    Journal of Crystal Growth, vol. 306, no. 2, pp. 428–432, 2007
  11. Preparation and mechanical properties of novel polyimide/T-silica hybrid films?
    Composites Science and Technology, vol. 67, no. 1, pp. 54–60, 2007
  12. Improvements in transmittance, mechanical properties and thermal stability of silica–polyimide composite films by a novel sol–gel route
    Composites Science and Technology, vol. 67, no. 11-12, pp. 2408–2416, 2007
  13. Photo-stabilization properties of transparent inorganic UV-filter/epoxy nanocomposites
    Composites Science and Technology, vol. 67, no. 15-16, pp. 3465–3471, 2007
  14. Guest Editorial
    Composites Science and Technology, vol. 67, no. 14, pp. 2893–2894, 2007
  15. Electromagnetic interference shielding effect of nanocomposites with carbon nanotube and shape memory polymer
    Composites Science and Technology, vol. 67, no. 14, pp. 2973–2980, 2007
  16. Cryogenic mechanical behaviors of MMT/epoxy nanocomposites
    Composites Science and Technology, vol. 67, no. 14, pp. 2934–2940, 2007
  17. Investigation of thermal expansion of PI/SiO2 composite films by CCD imaging technique from −120 to 200°C
    Composites Science and Technology, vol. 67, no. 14, pp. 3006–3013, 2007
  18. Controlled Synthesis and Characterization of CuO Nanostructures through a Facile Hydrothermal Route in the Presence of Sodium Citrate
    European Journal of Inorganic Chemistry, vol. 2007, no. 14, pp. 1966–1971, 2007
  19. Surfactant-Assisted Synthesis and Characterization of Novel Chain-Like CoNi Alloy Assemblies
    European Journal of Inorganic Chemistry, vol. 2007, no. 25, pp. 3947–3951, 2007
  20. Preparation and characterization of complex ferrite nanoparticles by a polymer-pyrolysis route
    Journal of Nanoparticle Research, vol. 9, no. 6, pp. 1041–1046, 2007
  21. Template-Free Synthesis of Monodispersed and Single-Crystalline Cantaloupe-like Fe2O3 Superstructures
    Crystal Growth & Design, vol. 7, no. 2, pp. 177–182, 2007
  22. Failure mechanisms of laminated composites subjected to static indentation
    Composite Structures, vol. 75, no. 1-4, pp. 489–495, 2006
  23. Synthesis, magnetic and microwave absorbing properties of core-shell structured MnFe2O4/TiO2 nanocomposites
    Composites Science and Technology, vol. 66, no. 13, pp. 2003–2008, 2006
  24. Studies on thermal and mechanical properties of PI/SiO2 nanocomposite films at low temperature
    Composites Part A: Applied Science and Manufacturing, vol. 37, no. 1, pp. 74–79, 2006
  25. Effects of PA6,6/PP ratio on the mechanical properties of short glass fiber reinforced and rubber-toughened polyamide 6,6/polypropylene blends
    Composites Part B: Engineering, vol. 37, no. 2-3, pp. 182–190, 2006
  26. Fabrication of octahedral magnetite microcrystals
    Materials Letters, vol. 60, no. 24, pp. 2979–2983, 2006
  27. Preparation of urchinlike NiO nanostructures and their electrochemical capacitive behaviors
    Materials Research Bulletin, vol. 41, no. 3, pp. 620–627, 2006
  28. Synthesis of nanocrystalline Zn0.5Mn0.5Fe2O4 via in situ polymerization technique
    Journal of Magnetism and Magnetic Materials, 2006
  29. Preparation and characterization of a novel solid titania precursor
    Journal of Non-Crystalline Solids, vol. 352, no. 30-31, pp. 3339–3342, 2006
  30. Preparation and characterization of transparent ZnO/epoxy nanocomposites with high-UV shielding efficiency
    Polymer, vol. 47, no. 6, pp. 2127–2132, 2006
  31. Synthesis of maghemite sub-microspheres by simple solvothermal reduction method
    Journal of Solid State Chemistry, vol. 179, no. 5, pp. 1554–1558, 2006
  32. Template-free synthesis and characterization of novel 3D urchin-like ?-Fe2O3 superstructures
    Journal of Materials Chemistry, vol. 16, no. 19, p. 1794, 2006
  33. Synthesis and cryogenic properties of polyimide–silica hybrid films by sol–gel process
    Polymer, vol. 46, no. 19, pp. 8373–8378, 2005
  34. Synthesis, characterization and magnetic properties of β-MnO nanorods
    Powder Technology, vol. 154, no. 2-3, pp. 120–124, 2005
  35. Preparation and characterization of shuttle-like -FeO nanoparticles by supermolecular template
    Journal of Solid State Chemistry, vol. 178, no. 9, pp. 2798–2803, 2005
  36. Fabrication and characterization of spherical Co/Ni alloy particles
    Materials Letters, vol. 59, no. 28, pp. 3791–3794, 2005
  37. Synthesis and magnetic characterization of novel CoFeO–BiFeO nanocomposites
    Materials Science and Engineering B, vol. 121, no. 3, pp. 255–260, 2005
  38. Low temperature properties of PI/SiO2 nanocomposite films
    Materials Science and Engineering: B, vol. 123, no. 3, pp. 216–221, 2005
  39. Synthesis of nanocrystalline spinel CoFeO via a polymer-pyrolysis route
    Physica B: Condensed Matter, vol. 370, no. 1-4, pp. 14–21, 2005
  40. Investigation of polyimide–mica hybrid films for cryogenic applications
    Composites Science and Technology, vol. 65, no. 11-12, pp. 1743–1748, 2005
  41. Dielectric and dynamic mechanical properties of polyimide?clay nanocomposite films
    Chemical Physics Letters, vol. 401, no. 4-6, pp. 553–557, 2005
  42. Cryogenic properties of SiO/epoxy nanocomposites
    Cryogenics, vol. 45, no. 6, pp. 450–454, 2005
  43. On the post-mortem fracture surface morphology of short fiber reinforced thermoplastics
    Composites Part A: Applied Science and Manufacturing, vol. 36, no. 7, pp. 987–994, 2005
  44. Mode-I interlaminar fracture behaviour of weft-knitted fabric reinforced composites
    Composites Part A: Applied Science and Manufacturing, vol. 36, no. 7, pp. 954–964, 2005
  45. Novel Silica Tube/Polyimide Composite Films with Variable Low Dielectric Constant
    Advanced Materials, vol. 17, no. 8, pp. 1056–1059, 2005
  46. Studies on Me/Al-layered double hydroxides (Me = Ni and Co) as electrode materials for electrochemical capacitors
    Electrochimica Acta, vol. 49, no. 19, pp. 3137–3141, 2004
  47. Magnetic properties of Ni ferrite nanocrystals dispersed in the silica matrix by sol?gel technique
    Journal of Magnetism and Magnetic Materials, vol. 281, no. 2-3, pp. 234–239, 2004
  48. Studies on characterization and cryogenic mechanical properties of polyimide-layered silicate nanocomposite films
    Polymer, vol. 45, no. 22, pp. 7579–7587, 2004
  49. Thermal conductivity of misaligned short-fiber-reinforced polymer composites
    Journal of Applied Polymer Science, vol. 88, no. 6, pp. 1497–1505, 2003
  50. On the elastic modulus of hybrid particle/short-fiber/polymer composites
    Composites Part B: Engineering, vol. 33, no. 4, pp. 291–299, 2002
  51. Correction of the measurement of fiber length of short fiber reinforced thermoplastics
    Composites Part A: Applied Science and Manufacturing, vol. 33, no. 11, pp. 1549–1555, 2002
  52. Fracture behavior of short glass fibre and short carbon fibre reinforced polypropylene composites
    International Journal of Materials and Product Technology, vol. 17, no. 1/2, p. 108, 2002
  53. Journal of Materials Science Letters, vol. 20, no. 1, pp. 31–33, 2001
  54. Comparison of the stress transfer in single- and multi-fiber composite pull-out tests
    Journal of Adhesion Science and Technology, vol. 14, no. 3, pp. 437–452, 2000
  55. Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites
    Composites Part A: Applied Science and Manufacturing, vol. 31, no. 10, pp. 1117–1125, 2000
  56. Analyses of the micromechanics of stress transfer in single- and multi-fiber pull-out tests
    Composites Science and Technology, vol. 60, no. 4, pp. 569–579, 2000
  57. Fracture resistance of short-glass-fiber-reinforced and short-carbon-fiber-reinforced polypropylene under Charpy impact load and its dependence on processing
    Journal of Materials Processing Technology, vol. 89-90, no. 1-3, pp. 501–507, 1999
  58. Strength anisotropy of misaligned short-fibre-reinforced polymers
    Composites Science and Technology, vol. 59, no. 5, pp. 699–708, 1999
  59. The flexural modulus of misaligned short-fiber-reinforced polymers
    Composites Science and Technology, vol. 59, no. 10, pp. 1533–1542, 1999
  60. The elastic modulus of misaligned short-fiber-reinforced polymers
    Composites Science and Technology, vol. 58, no. 3-4, pp. 389–400, 1998
  61. An analytical characterization of the anisotropy of the elastic modulus of misaligned short-fiber-reinforced polymers
    Composites Science and Technology, vol. 58, no. 12, pp. 1961–1972, 1998
  62. Fracture resistance of unfilled and calcite-particle-filled ABS composites reinforced by short glass fibers (SGF) under impact load
    Composites Part A: Applied Science and Manufacturing, vol. 29, no. 5-6, pp. 631–641, 1998
  63. Characterization of tensile behaviour of hybrid short glass fibre/calcite particle/ABS composites
    Composites Part A: Applied Science and Manufacturing, vol. 29, no. 5-6, pp. 575–583, 1998
  64. Journal of Materials Science, vol. 33, no. 20, pp. 4953–4960, 1998
  65. Journal of Materials Science, vol. 32, no. 8, pp. 1985–1993, 1997
  66. Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers
    Composites Science and Technology, vol. 56, no. 10, pp. 1179–1190, 1996
  67. Influences of artificial pre-stressing on ply stresses and tensile properties of Vinylon fibre-reinforced aluminium laminates (VIRALL)
    Journal of Materials Science, vol. 31, no. 16, pp. 4415–4421, 1996
  68. Biomimicry of bamboo bast fiber with engineering composite materials
    Materials Science and Engineering: C, vol. 3, no. 2, pp. 125–130, 1995
  69. Experimental investigation of biomimetic double-helical reinforcing elements
    Journal of Materials Science Letters, vol. 14, no. 11, pp. 769–772, 1995
  70. Reformed bamboo and reformed bamboo/aluminium composite
    Journal of Materials Science, vol. 29, no. 22, pp. 5990–5996, 1994
  71. An estimation of fracture of SiC particulate affected by aluminum alloy matrix
    Scripta Metallurgica et Materialia, vol. 28, no. 7, pp. 869–874, 1993
  72. On the pull-out of fibres with a branched structure and the inference of strength and fracture toughness of composites
    Composites Science and Technology, vol. 47, no. 3, pp. 245–250, 1993
  73. Relationship Between Microstructure and Coercivity in (Nd, Dy)–(Fe, Co)–B Based Sintered Magnets with Minor Nb and Al Additions
    physica status solidi (a), vol. 120, no. 2, pp. 627–634, 1990