Advanced Search
Hindawi Publishing Corporation
Home
Journals
About Us
Journals
Browse by Subject
Browse by Title
Information Menu
Abstracting and Indexing
Conference Sponsorships
Hindawi in the Press
Institutional Memberships
Scholarly Books
Society Affiliations
Subscription Information
Login to the Manuscript Tracking System
Start a New Open Access Journal with Hindawi
Yoshinobu Tsujimoto
Articles in Scholarly Journals [Incomplete List]
CFD Simulations and Experiments of Flow Fluctuations Around a Steam Control Valve
Journal of Fluids Engineering, vol. 129, no. 1, p. 48, 2007
Steady Analysis of the Thermodynamic Effect of Partial Cavitation Using the Singularity Method
Journal of Fluids Engineering, vol. 129, no. 2, p. 121, 2007
Response of Backflow to Flow Rate Fluctuations
Journal of Fluids Engineering, vol. 129, no. 3, p. 350, 2007
LES Simulation of Backflow Vortex Structure at the Inlet of an Inducer
Journal of Fluids Engineering, vol. 129, no. 5, p. 587, 2007
Effect of Hydrofoil Shapes on Partial and Transitional Cavity Oscillations
Journal of Fluids Engineering, vol. 129, no. 6, p. 669, 2007
Unsteady Tip Leakage Vortex Cavitation Originating From the Tip Clearance of an Oscillating Hydrofoil
Journal of Fluids Engineering, vol. 128, no. 3, p. 421, 2006
Linear Stability Analysis of the Effects of Camber and Blade Thickness on Cavitation Instabilities in Inducers
Journal of Fluids Engineering, vol. 128, no. 3, p. 430, 2006
Theoretical Analysis of Cavitation in Inducers with Unequally Spaced Blades
JSME International Journal Series B, vol. 49, no. 2, pp. 473–481, 2006
A Study of Vortex Structure in the Shear Layer between Main Flow and Swirling Backflow
JSME International Journal Series B, vol. 47, no. 3, pp. 541–548, 2004
Rotating Choke in Cavitating Turbopump Inducer
Journal of Fluids Engineering, vol. 126, no. 1, p. 87, 2004
Quasi-Three-Dimensional Analysis of Cavitation in an Inducer
Journal of Fluids Engineering, vol. 126, no. 5, p. 709, 2004
Effects of Seal Geometry on Dynamic Impeller Fluid Forces and Moments
Journal of Fluids Engineering, vol. 125, no. 5, p. 786, 2003
A Cavity Wake Model Based on the Viscous/Inviscid Interaction Approach and Its Application to Nonsymmetric Cavity Flows in Inducers
Journal of Fluids Engineering, vol. 125, no. 5, p. 758, 2003
Advanced Fluid Information. Unsteady Stress of 4-Bladed Inducer Blades and the Effect of Inlet Flow Distortion.
JSME International Journal Series B, vol. 45, no. 1, pp. 47–54, 2002
Observations of Oscillating Cavitation on a Flat Plate Hydrofoil.
JSME International Journal Series B, vol. 45, no. 3, pp. 646–654, 2002
Tip Leakage Vortex Cavitation from the Tip Clearance of a Single Hydrofoil
JSME International Journal Series B, vol. 45, no. 3, pp. 662–671, 2002
Alternate Blade Stall and Rotating Stall in a Vaned Diffuser
JSME International Journal Series B, vol. 45, no. 4, pp. 810–819, 2002
Theoretical Analysis of Fluid Forces on an Open-Type Centrifugal Impeller in Whirling Motion
Journal of Fluids Engineering, vol. 124, no. 2, p. 342, 2002
Numerical Study of Rotating Stall in a Pump Vaned Diffuser
Journal of Fluids Engineering, vol. 124, no. 2, p. 363, 2002
Modeling of 2-D Leakage Jet Cavitation as a Basic Study of Tip Leakage Vortex Cavitation
Journal of Fluids Engineering, vol. 123, no. 1, p. 50, 2001
Theoretical Analysis of Transitional and Partial Cavity Instabilities
Journal of Fluids Engineering, vol. 123, no. 3, p. 692, 2001
Effects of Alternate Leading Edge Cutback on Unsteady Cavitation in 4-Bladed Inducers
Journal of Fluids Engineering, vol. 123, no. 4, p. 762, 2001
Flutter Limits and Behavior of a Flexible Thin Sheet in High-Speed Flow— II: Experimental Results and Predicted Behaviors for Low Mass Ratios
Journal of Fluids Engineering, vol. 122, no. 1, p. 74, 2000
A Theoretical Analysis of Alternate Blade Cavitation in Inducers
Journal of Fluids Engineering, vol. 122, no. 1, p. 156, 2000
Flutter Limits and Behaviors of a Flexible Thin Sheet in High-Speed Flow— I: Analytical Method for Prediction of the Sheet Behavior
Journal of Fluids Engineering, vol. 122, no. 1, p. 65, 2000
Theoretical Analysis of Cavitation in Inducers With Unequal Blades With Alternate Leading Edge Cutback: Part I—Analytical Methods and the Results for Smaller Amount of Cutback
Journal of Fluids Engineering, vol. 122, no. 2, p. 412, 2000
Theoretical Analysis of Cavitation in Inducers With Unequal Blades With Alternate Leading Edge Cutback: Part II—Effects of the Amount of Cutback
Journal of Fluids Engineering, vol. 122, no. 2, p. 419, 2000
A Linear Stability Analysis of Cavitation in a Finite Blade Count Impeller
Journal of Fluids Engineering, vol. 122, no. 4, p. 798, 2000
Theoretical analysis of infrasound radiation from an oscillating bridge
Journal of Sound and Vibration, vol. 81, no. 4, pp. 453–468, 1982
Study of three-dimensional unsteady Oseen flow
Journal of Fluid Mechanics, vol. 86, no. 04, p. 609, 1978
Three Dimensional Unsteady Actuator Disk Theory for Subsonic Viscous Flow
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, vol. 58, no. 12, pp. 561–569, 1978
The Unsteady Forces on Flat-Plate-Airfoils in Cascade Moving through Sinusoidal Gusts
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, vol. 56, no. 5, pp. 205–216, 1976