Volume 1 (1972), Issue 2, Pages 117-123
Anisotropy in Some Soft Magnetic Materials
1Department of Physical Metallurgy, University of Birmingham, Edgbaston, Birmingham 15, UK
2West Midland Gas Board, Solihull, UK
Received 20 March 1972; Accepted 9 June 1972
Copyright © 1972 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Orientation distribution data are presented for low carbon steel and silicon iron after different rolling and annealing schedules. Magnetic properties which depend solely on orientation can be well described using such distributions. A general analysis is demonstrated by which other properties may be divided into two components which are respectively dependent and independent of orientation. An example of this, a.c. power loss, is considered in detail. It is shown that the orientation-dependence of power loss derives entirely from the hysteresis component. The classical eddy current loss together with an ‘anomalous’ loss of similar magnitude constitute the orientationin-dependent part. The analysis may be used to predict properties under a range of conditions in textured materials.