Editorial Board

• Zainal Arifin Ahmad, Universiti Sains Malaysia, Malaysia
• José Guadalupe Argüello, Sandia National Laboratories, USA
• Abdul-Majeed Azad, University of Toledo, USA
• Marianne Balat-Pichelin, PROMES-CNRS laboratory, France
• Slavko Bernik, Jozef Stefan Institute, Slovenia
• Kong Ling Bing, Nanyang Technological University, Singapore
• Oana Bretcanu, Newcastle University, United Kingdom
• Navin Chandra, Advanced Materials and Processes Research Institute (CSIR), India
• Dianying Chen, University of Connecticut, USA
• Yong Soo Cho, Yonsei University, Republic of Korea
• Thierry Chotard, Université de Limoges, France
• Yeong-Shyung Matt Chou, Pacific Northwest National Laboratory, USA
• Sheng-Yuan Chu, National Cheng Kung University, Taiwan
• J. Carlos Diez, Universidad de Zaragoza, Spain
• Olga Dymshits, Vavilov State Optical Institute, Russia
• John A. Fernie, University of Cambridge, United Kingdom
• Victor Fruth, Romanian Academy, Romania
• Swapankumar Ghosh, Central Glass & Ceramic Research Institute, CSIR, Kolkata, India
• Narendra N. Ghosh, Birla Institute of Technology and Science, India
• Liam Grover, University of Birmingham, United Kingdom
• Stoyan Gutzov, University of Sofia, Bulgaria
• Maria Hartmanova, Slovak Academy of Sciences, Slovakia
• Hsing I. Hsiang, National Cheng Kung University, Taiwan
• Zhengren Huang, Shanghai Institute of Ceramics, China
• Chii Shyang Hwang, National Cheng Kung University, Taiwan
• Dechang Jia, Harbin Institute of Technology, China
• Isao Kagomiya, Nagoya Institute of Technology, Japan
• Masakazu Kawashita, Tohoku University, Japan
• Hiroshi Kimura, National Defence Academy, Japan
• Sanjay Kumar, National Metallurgical Laboratory, India
• Markku Lahti, VTT Technical Research Centre of Finland, Finland
• Jacques Lamon, Institut national des sciences appliquées (INSA) de Lyon, France
• Yongyut Laosiritaworn, Chiang Mai University, Thailand
• Jerry C. Lasalvia, U.S. Army Research Laboratory, USA
• Shuting Lei, Kansas State University, USA
• Xian-Fang Li, Central South University, China
• Leo Chau-kaung Liau, Yuan Ze University, Taiwan
• Su-Shia Lin, National Chi Nan University, Taiwan
• Yi-Cheng Liou, Kun Shan University, Taiwan
• Hiroshi Maiwa, Shonan Instituite of Technology, Japan
• Sylvain Marinel, CRISMAT Laboratory, France
• Vikas Mathe, Assistant Professor, India
• Mehdi Mazaheri, Swiss Federal Institute of Technology, Switzerland
• Xigeng Miao, Queensland University of Technology, Australia
• Miho Nakamura, Tokyo Medical and Dental University, Japan
• Paolo Nanni, University of Genoa, Italy
• Won-Chun Oh, Hanseo University, Republic of Korea
• Katsuyoshi Oh-Ishi, Chuo University, Japan
• Ungyu Paik, Hanyang University, Republic of Korea
• Om Parkash, Department of Ceramic Engineering, Indian Institute of Technology, Banaras Hindu University, Varanasi, India
• María Jesús Pascual, Instituto de Ceramica y Vidrio (CSIC), Spain
• Zhijian Pei, Kansas State University, USA
• Sukon Phanichphant, Chiang Mai University, Thailand
• Vladimir Plashnitsa, University of Notre Dame, USA
• Jan A. Puszynski, South Dakota School of Mines and Technology, USA
• P. Markondeya Raj, Georgia Institute of Technology, USA
• R. Ratheesh, Ministry of Communication and Information Technology, India
• Antonio Ravaglioli, Ceramic Science and Technology expert, Italy
• Marco Antonio Schiavon, Universidade Federal de São João del-Rei, Brazil
• Rainer Schmidt, Universidad Complutense de Madrid, Spain
• M. T. Sebastian, National Institute for Interdisciplinary Science and Technology, India
• Santiranjan Shannigrahi, Institute of Materials Research and Engineering (IMRE), Singapore
• Jyh Sheen, National Formosa University, Taiwan
• Zhiming Shi, Inner Mongolia University of Technology, China
• Raj N. Singh, University of Cincinnati, USA
• Ramasamy Sivakumar, The University of Akron, USA
• Ulrich Soltmann, GMBU, Germany
• Toshio Suzuki, National Institute of Advanced Industrial Science and Technology (AIST), Japan
• Wan D. Teng, SIRIM Berhad, Malaysia
• Om P. Thakur, Defence Research and Development Organisation, India
• Parjaree Thavorniti, National Metal and Materials Technology Center, Thailand
• Alfred Tok, Nanyang Technological University, Singapore
• Wenjea Tseng, National Chung Hsing University, Taiwan
• Wei-Hsing Tuan, National Taiwan University, Taiwan
• Manuel Valente, Universidade de Aveiro, Portugal
• Patricia Valerio, Biological Sciences Institute, Brazil
• Paula M. Vilarinho, University of Aveiro, Portugal
• Yoshiharu Waku, Shimane University, Japan
• Gopa Kumar Warrier, National Institute for Interdisciplinary Science and Technology, India
• Patrick Weisbecker, Université Bordeaux 1, France
• Sujitra Wongkasemjit, Chulalongkorn University, Thailand
• Supattra Wongsaenmai, Maejo University, Thailand
• Kimihiro Yamashita, Tokyo Medical and Dental University, Japan
• Takayuki Yanagida, Kyushu Institute of Technology, Japan
• Cheng-Fu Yang, National University of Kaohsiung, Taiwan
• Shoufeng Yang, University of Southampton, United Kingdom
• Mahmoud F. Zawrah, National Research Center, Egypt
• Wenguang Zhang, Shanghai Jiao Tong University, China
• Xianghua Zhang, Université de Rennes I, France
• Zhe Zhao, Stockholms universitet, Sweden
• Klementina Zupan, University of Ljubljana, Slovenia