- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Submit a Manuscript
- Table of Contents
ISRN Communications and Networking
Volume 2012 (2012), Article ID 185472, 8 pages
A Reliable and Efficient Highway Multihop Vehicular Broadcast Model
1Institute of Communication Engineering, PLA University of Science and Technology, Nanjing 210007, China
2National Key Laboratory of Automotive Dynamic Simulation, College of Automotive Engineering, Jilin University, Changchum 130025, China
Received 20 September 2011; Accepted 11 October 2011
Academic Editors: M. Listanti and Y. M. Tseng
Copyright © 2012 Deng Chuan and Wang Jian. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
A reliable and efficient highway broadcast model based on gain prediction is proposed to solve excessive information retransmission and channel conflict that often happen to flooding broadcast in vehicular ad hoc network. We take accountofthe relative speeds, the intervehicle distance, and the coverage difference of the neighboring vehicles into predicting the gain of every neighbor, and further select the neighbor with the maximum gain as the next hop on the every direction of road. Simulations show that the proposed model is clearly superior to the original flooding model and a recent variant based on mobility prediction in packet arrival rate, average delay, forwarding count, and throughput.
Vehicular ad hoc network (VANET) is a temporary autonomous system composed by a group of vehicles equipped with transceivers and global positioning system (GPS). VANET is specifically designed to communicate among vehicles so that drivers can acquire the information about other vehicles (e.g., speed, direction, and location) as well as real-time traffic information beyond visual range. The current main goal of VANET is providing safety and comfort for passengers .With this stream of research, highway safety has attracted more attentions, such as active accident warning, icy patch alarm, and others. Whether a successive collision can be effectively avoided is mainly dependent on transmitting warning information reliably and efficiently on multipaths. Due to limited transmission range of nodes, each mobile vehicle in VANET acts as router, for transmitting information to destination. Broadcast is a common means to disseminate messages. Among various broadcast approaches, flooding is the first one. Each node rebroadcasts the received message exactly once, which results in broadcast storm problems . Although  proposes mechanisms to improve flooding, they are not effective for all range of node density and packet loads in VANET . Therefore, multihop broadcast in VANET is faced with many challenges .
This work proposes a reliable broadcast routing based on gain prediction (RB-GP) in which the relative speeds and coverage differences of the neighboring vehicles are calculated, and the intervehicle distance is also considered, and thus the neighbor under consideration with gain and reliability is selected as the next hop on the every direction. Moreover, RB-GP switches to the storage and forwarding when there are not proper next hop temporarily, weakening the negative impacts caused by the serious topological segmentation in VANET .
The remainder of this paper is organized as follows. Section 2 introduces the background, including some standards and related work. The RB-GP model is explained in details in Section 3. The simulations are provided in Section 4. Finally, in Section 5, some conclusions are drawn, and suggestions for future work are made.
2.1. IEEE 802.11p/IEEE 1609 Standards
IEEE 802.11a/b/g/ has been extensively used in the wireless network but is not adaptive to vehicular networks because this standard is designed only for little mobility. Recently, IEEE 802.11-based solutions for vehicular networks are also investigated by IEEE 802.11p. IEEE 802.11p wireless access in the vehicular environment (WAVE) defines amendments to IEEE 802.11 to support intelligent transportation system (ITS) applications in the area of traffic safety and efficiency, as, for instance, green-light optimal speed advisory or traffic jam ahead warning. Its protocol stack is shown in Figure 1. The IEEE 1609 family of standards for WAVE consists of four trail use standards : resource manager (IEEE 1609.1) describes the data and management services offered within the WAVE architecture, defines command message formats and the appropriate responses to those messages, data storage formats that must be used by applications to communicate between architecture components, and status and request message formats; security services for applications and management messages (IEEE 1609.2) defines the circumstances for using secure message exchanges and how those messages should be processed based upon the purpose of the exchange; networking services (IEEE 1609.3) defines network and transport layer services, including addressing and routing, in support of secure WAVE data exchange; multi-channel operations (IEEE 1609.4) provides enhancements to the IEEE 802.11 media access control (MAC) to support WAVE operations. As a whole, the IEEE 1609 family of standards defines the architecture, communications model, management structure, security mechanisms, and physical access for high-speed (up to 27 Mb/s) short-range (up to 1000 m) low-latency wireless communications in the vehicular environment. We employ IEEE 802.11p as the lower layers’ (PHY and MAC) communication protocol in order to simulate more real scene.
2.2. Related Work
Much of the literature [8, 9] on intervehicle communications (IVCs) is navigation safety related. At the network layer, the most common way to broadcast safety messages is via reliable, robust flooding. However, the efficiency of flooding quickly decreases with the number of nodes. For scalable delivery, researchers have proposed georouting and further have focused on exploiting innate characteristics of vehicular networks such as high speed, but restricted, mobility. Recently, there have been many literatures for alleviating broadcast storms [10, 11]. For example, urban multihop broadcast (UMB)  features a form of redundant flood suppression scheme where the furthest node in the broadcast direction from a sender is selected to forward and acknowledge the packet. The scheme alleviates broadcast storm and hidden terminal problems. However, according to the contention resolution scheme, the potential relay nodes wait the longest time before retransmission. UMB may lead to a large delay, especially in high-mobility scenarios. Segment-oriented data abstraction and dissemination (SODAD)  collects only the information relative to a given locality (i.e., a road segment) to create a scalable decentralized information system. But SODAD is specially designed for the provision of comfort applications. Movement prediction-based routing (MOPR)  predicts future positions of vehicles and estimates the time needed for the transmission of data to decide whether a route is likely to be broken or not during the transmission time. The performance of the scheme largely depends on the prediction accuracy and the estimate of the transmission time that depends, in turn, on several factors such as network congestion status, driver’s behavior, and the used transmission protocols. Distributed movement-based routing algorithm (MORA)  exploits the position and direction of movement of vehicles. The metric used in this protocol is a linear combination of the number of hops and a target functional, which can be independently calculated by each node. This function depends on the distance of the forwarding car from the line connecting the source and destination and on the vehicle’s movement direction. Each vehicle needs to be able to implement this in a distributed manner. Preferred group broadcasting (PGB)  aims to reduce control messages overhead by eliminating redundant transmissions and to obtain stable routes with the ability to autocorrect. PGB classifies each node that receives a broadcast packet (e.g., route request) into one of the three groups based on the sensed signal level: preferred group, IN group, and OUT group. PGB enhancements are bound to ad hoc on-demand distance vector (AODV), however. Vector-based tracking detection (V-TRADE) and history-enhanced V-TRADE (HV-TRADE)  classify the neighbors into different forwarding groups each of which only selects a small subset of vehicles with high speed to rebroadcast the message. But they still select the fastest nodes which is not suitable for the highly dynamic vehicular topology. Recently, reliable broadcast routing scheme based on mobility prediction (RB-MP)  selects the node with the maximum speed on the every direction as the next hop according to the prediction holding time provided by position and relative velocity, which can effectively avoid the problems in the earlier discussed work. But the coverage of the node with the maximum speed may be very small in the next rebroadcasting because the maximum speed is affected by the relative speed and the intervehicle distance. One consideration in selecting a proper rebroadcast node is that the node with a short distance may increase transmission hops, but the node with a long away trip often causes connection instability. Therefore, for a suitable tradeoff between reliability and efficiency, the work in this paper is partially motivated from the aforementioned work and aims to a reliable and efficient broadcasting scheme for highway scenario.
3. RB-GP Model
We list necessary definitions as follows for clear presentation.
Neighbor nodes set is composed of node ’s of all neighbors is the total number of members in.
Two-hop node communicates with node only by one forwarder.
Two-hop node set is composed of node i’s all two-hop nodes. denotes the total number of members in . is defined as where is the two-hop set connected by the neighbor ; that is, .
Forwarding nodes set is composed of the nodes; node supposes which will forward the packets from it.
Neighbor information table records neighbor information, such as location, speed, and direction.
Position updating period is regular periodic interval by which the node’s location is evaluated.
Prediction holding time of the connection is the time that node may stay in the transmission range of node . Without loss of generality, it is assumed that node and node are on a straight road, so can be calculated by where and are the ID of the receiver and the sender, respectively. (, ) and (, ) are the previous position while (, ) and (, ) are the current. When the distance between node and node increases, the function sign() returns +1, otherwise returns −1.
Direct gain is the ratio of the coverage difference of the neighboring nodes , to node ’s two-hop node set . The precondition for calculating is ensuring that the neighbor node can receive the packets from node successfully; that is, . is calculated by
Indirect gain is the benefit possibly brought by the assumption that node selects node as the next hop, and also its precondition is that node can receive node ’s packets. In detail, if and is close to , it means that node will leave the transmission range of node in short time, and some changes may happen to its local topology. is calculated by
Gain function . node uses this function to calculate the gain value of neighbor as follows: where , as and ; so the range of is .
3.2. Specific Process
In RB-GP model, node information is assumed to be available for each node which can be acquired through beacon or periodical short message exchanging, including ID (node identity), position (, is the GPS coordinate), speed (the average relative speed ), and direction (direction of the relative speed defined by an angle with -axis). Each node establishes its own neighbor information table through exchanging node information with each other. The neighbor information table is exchanged only between one-hop neighbors and is not forwarded to other far away nodes.
The design goal of RB-GP model is to maximize the range of every rebroadcasting and to minimize transmission delay through selecting the proper next hop on every direction and meanwhile ensures the neighbor node can receive the packets from the upstream node. In detail, RB-GP model tries to find the neighbor node with the biggest gain on the every direction. We take Figure 2, for example, to explain the working process of RB-GP model. The current forwarding node records the identities of the next hops on all directions into packet header in order that the next hop can decide whether or not it needs to rebroadcast the received packets. Node ’s working process is as follows when receiving a broadcasting packet .
Step 1. Node judges whether it has received before. If so, it will drop directly and exit.
Step 2. Node judges whether it is indeed the forwarding node selected by the upstream node through analyzing the packet header. If not, it exits; otherwise node continues the next step or stores temporarily when the network is not connected.
Step 3. Node classifies the neighbors into three groups according to node ’s neighbor information table.(i)The nodes locate in the same road as node and are in the front of , as node in Figure 2.(ii)The nodes locate in the same road as and are in the back of , as node .(iii)The nodes locate in the different road from , as nodes , , and .
Step 4. Node calculates the gain value of every neighbor node using (9) and, further, selects the node with the maximum gain in each group as the next hop, records its ID into the header of , and finally sends packet .
Node will start the store-and-forward mechanism  when it does not find any proper node in Step 3. Node stores the broadcasting packet in memory temporarily and then continues forwarding to other appropriate nodes within its communication range at some time.
Table 1 lists the simulation parameters, and Figure 3 shows the simulated scenario we used in this work. We mainly focus on highway scenario, so traffic lights and roadblocks are neglected. Vehicles randomly decide to keep going ahead, to turn left, or to turn right when arriving at a crossroad (blind intersection).
We used the following metrics to compare the performances of the RB-GP, the RB-MP, and the flooding: packet arrival rate, average delay, forwarding count, and throughput. Each simulation result corresponds to an average over 50 independent of experiments.
We first investigate the performances of different models, and the results are shown in Figure 4. In Figure 4(a), RB-GP model is superior to the other two models in packet arrival rate. This is because RB-GP model chooses the node with the maximum gain as the next hop on the every direction so that each selected node can cover most nodes and receive the broadcasting packet successfully, resulting in a high packet arrival rate. Although the flooding model has a high packet arrival rate at initial simulation because it requires all nodes to rebroadcast the received packets again, the packet arrival rate is quickly decreasing because of a large number of redundant information and channel conflict as system running. The RB-MP model selects the node with the maximum speed as the next hop, so the coverage difference of the neighboring vehicles may be small, resulting in lower packet arrival rate than that of the RB-GP model. In Figure 4(b), RB-GP model shows a slightly higher average delay than RB-MP model at initial simulation because of the incompleteness of node information, but the average delay is gradually decreasing with information exchange and finally has the smallest average delay in three models. Figure 4(c) illustrates the forwarding count of three models. As aforementioned, selecting a node in the short range as the next hop will increase the forwarding count, but, in the converse case, the selected link may become instable because of quick movement and signal interference. RB-GP model balances the link reliability and the transmission distance and reduces the unnecessary information retransmission and the probability of channel conflict, so resulting in the smallest forwarding counts. Figure 4(d) reflects the changing trend of end-to-end throughput. The curves of all the models reach the peak at initial simulation due to network instability, but the throughputs begin to fall back and steady with system running; RB-GP model behaves better than the other two models because of a high packet arrival rate.
We now turn to explore the impacts of only introduced parameter on RB-GP model, and the results are shown in Figure 5. The parameter represents the weight that the direct gain and the indirect gain contribute to calculating the total gain of a given node means that the selection of forwarding nodes is determined entirely by the indirect gain, and expresses the opposite selecting rule. From Figure 5, one can conclude that the packet arrival rate gets to the maximum when ; the average delay arrives at minimum when ; the parameter has little effects on the forwarding count and the throughout.
Due to the limited transmission range in vehicular networks, single-hop transmission usually cannot cover all destination nodes, so designing a reliable and efficient multihop broadcast model is one of the fundamental tasks in VANET. We propose a novel multihop broadcast model RB-GP for highway scenario through introducing the concept of gain prediction. The gain value is related with the relative speed, the intervehicle distance, and the coverage difference of the neighboring vehicles. RB-GP model selects the node with the biggest gain as the next hop on the every direction and meanwhile ensures that the selected node can receive the packets successfully, thus achieves decreasing channel conflict and unnecessary information retransmission. The results show that RB-GP is superior to the RB-MP and the flooding models in packet arrival rate, average delay, forwarding count, and throughput.
The future work will focus on multihop broadcast model in other road scenarios, such as urban, and, further, consider the possible broadcast pattern in hybrid networks, that is, synchronously communicating with cellular and ad hoc technologies.
This project work was sponsored by the National High-Tech R&D Program of China (863 Program), under Grant no. 2009aa01z426.
- C. Y. Chang, Y. Xiang, and M. L. Shi, “Development and status of vehicular ad hoc networks,” Journal on Communications, vol. 28, no. 11, pp. 116–126, 2007.
- S. Y. Ni, Y. C. Tseng, and Y. S. Chen, “The broadcast storm problem in a mobile ad hoc network,” in Proceedings of the 5th Annual ACM/IEEE International Conference on Mobile Computing and Networking, pp. 151–162, Seattle, Wash, USA, 1999.
- L. Da, H. Huang, X. Li, and F. Tang, “A distance-based directional broadcast protocol for urban vehicular ad hoc network,” in Proceedings of the International Conference on Wireless Communications, Networking and Mobile Computing, vol. Shanghai, China, pp. 1520–1523, Shanghai, China, 2007.
- L. J. Chen, H. Jiang, J. Wu, C. C. Guo, W. P. Xu, and P. L. An, “Research on transmission control on vehicle ad-hoc network,” Journal of Software, vol. 18, no. 6, pp. 1477–1490, 2007.
- Y. Z. Li, J. X. Liao, T. H. Li, and X. M. Zhu, “A contention-based forwarding routing protocol for vehicular ad hoc networks in city scenarios,” Acta Electronica Sinica, vol. 37, no. 12, pp. 2639–2645, 2009.
- “P1609.0 IEEE Trial-Use Standard for Wireless Access in Vehicular Environments (WAVE)- Architecture”.
- I. W. Group, “IEEE P 802.11p/D3.0, Draft Amendament for Wireless Access in Vehicular Environments (WAVE),” 2007.
- T. M. Marc, “Inter-vehicle communications: assessing information dissemination under safety constraints,” in Proceedings of the 4th Annual IEEE/IFIP Conference on Wireless On Demand Network Systems and Services, pp. 59–64, Obergurgl, Austria, 2007.
- C. Suthaputchakun, “Priority-based inter-vehicle communication for highway safety messaging using IEEE 802.11e,” International Journal of Vehicular Technology, vol. 2009, Article ID 423141, 12 pages, 2009.
- R. Chen, W. Jin, and A. Regan, “Multi-hop broadcasting in vehicular Ad Hoc networks with shockwave traffic,” in Proceedings of the 2nd IEEE Intelligent Vehicular Communications System Workshop, pp. 1–5, Las Vegas, Nev, USA, 2010.
- J. R. Francisco, M. R. Pedro, and S. Ivan, “Reliable and efficient broadcasting in vehicular Ad Hoc networks,” in Proceedings of the IEEE Vehicular Technology Conference, pp. 1–5, Barcelona, Spain, 2009.
- G. Korkmaz, F. Ekici, F. Ozgoner, and O. Ozgoner, “Urban multi-hop broadcast protocol for inter-vehicle communication systems,” in Proceedings of the 1st ACM International Workshop on Vehicular Ad Hoc Networks, pp. 76–85, Philadelphia, Pa, USA, October 2004.
- L. Wischhof, A. Ebner, and H. Rohling, “Information dissemination in self-organizing intervehicle networks,” IEEE Transactions on Intelligent Transportation Systems, vol. 6, no. 1, pp. 90–101, 2005.
- H. Menouar, M. Lenardi, and F. Filali, “A movement prediction based routing protocol for vehicle-to-vehicle communications,” in Proceedings of the International Workshop on Vehicle-to-Vehicle Communications, pp. 1–8, San Diego, Calif, USA, 2005.
- F. Granelli, G. Boato, and D. Kliazovich, “MORA: a movement-based routing algorithm for vehicle Ad Hoc networks,” in Proceedings of the IEEE Workshop on Automotive Networking and Applications, pp. 256–265, San Francisco, Calif, USA, 2006.
- V. Naumov, R. Baumann, and T. Gross, “An evaluation of inter-vehicle ad hoc networks based on realistic vehicular traces,” in Proceedings of the 7th ACM International Symposium on Mobile Ad Hoc Networking and Computing (MOBIHOC '06), pp. 108–119, Florence, Italy, May 2006.
- M. Sun, W. Feng, T. H. Lai, K. Yamada, H. Okada, and K. Fujimura, “GPS-based message broadcasting for inter-vehicle communication,” in Proceedings of the International Conference on Parallel Processing, pp. 279–286, Toronto, Canada, 2000.
- P. Lai, X. Wang, N. Lu, and F. Liu, “A reliable broadcast routing scheme based on mobility prediction for VANET,” in Proceedings of the IEEE Intelligent Vehicles Symposium, pp. 1083–1087, Xi’an, China, June 2009.
- M. Chuan, Y. Peng, B. Davison, and L. Cheng, “Store-and-Forward Performance in a DTN,” in Proceedings of the IEEE Vehicular Technology Conference, pp. 187–191, Melbourne, Australia, 2006.
- NS2, http://www.isi.edu/nsnam/ns.
- VanetMobiSim, http://vanet.eurecom.fr.