- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Submit a Manuscript
- Table of Contents
ISRN High Energy Physics
Volume 2012 (2012), Article ID 838394, 10 pages
The Effect of Energy Leakage Probability on Burn Propagation in an Optically Thick Fusion Plasma
1Physics Department, Mazandaran University, P.O. Box 47415-416, Babolsar, Iran
2Physics Department, Faculty of Sciences, Golestan University, Shahid Beheshti Street, P.O. Box 155, Gorgan, Iran
Received 3 October 2012; Accepted 4 November 2012
Academic Editors: S. Alexeyev, A. Belhaj, F.-H. Liu, and Z. H. Xiong
Copyright © 2012 M. Mahdavi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
In an optically thick plasma, the mean free path of bremsstrahlung photons is smaller than the plasma radius, and radiation can be treated as a photon gas in thermal equilibrium. In these conditions, the black body radiation spectrum exceeds the number of hot photons, and reabsorption processes such as inverse bremsstrahlung radiation and inverse Compton scattering become important. It has been shown that a dense fusion plasma like the one being used in ICF method is initially optically thick. When the fuel pellet is burning, the temperature of its electrons rises (approximately greater than 90 KeV), and the pellet becomes rapidly optically thin. In this paper, we have shown that the energy leakage probability makes electron temperature remain low (approximately smaller than 55 KeV), and as a result the fuel pellet remains optically thick during burning.
Research in laser driven inertial confinement fusion (ICF) began soon after the invention of the laser (see the historical notes in [1, 2]). In recent years, because of the development of high intensity lasers (especially in NIF: National Ignition Facility, USA , LMJ: Laser Megajoule, France ), the ICF method is in the forefront of energy production from fusion process. The main components of the ICF fuel pellets are the hydrogen isotopes, that is, deuterium and tritium (DT). The DT mixture is the fuel with the lowest ignition temperature and has the highest specific yield. The problem is that tritium is an unstable artificial isotope, decaying to with a half-life of 12.3 years and, as a result, needs to be produced within the DT fuel cycle. Therefore, the tritium production has the most significant radiological problem in the future of DT fusion reactors. Furthermore, another problem is energetic neutrons (14 MeV) that are yielded from DT reaction.
One of the solutions to overcome the problem of DT fuel utilization is using Proton-Boron-11 and deuterium-helium-3 fuel configuration. These configurations are called advanced fusion fuels. In classical plasmas, self-burning of advanced fuels is unlikely to occur , because at high temperatures the bremsstrahlung loss may exceed the fusion power produced. However, If the final temperature reached is low enough, the electrons of the plasma can be degenerated . If this is the case, bremsstrahlung emission is strongly suppressed [7–12], and ignition temperature becomes lower than in the classical plasmas. In addition, several research showed that in Fermi degenerate plasmas, the properties of the aneutronic fuel burning can be very different from those of classical plasmas, due to the reduction of ion-electron (i-e) collisions, both of which allow the ion temperature to exceed the electron temperature and reduce the bremsstrahlung loss [13–17]. Nevertheless, low gain is the main failure of using advanced fusion fuels .
Another solution has been proposed to be adding a small amount of tritium to the deuterium fuel in the form of , where is the ratio of tritium to deuterium in initial fuel [18, 19]. It has been shown that in and with a given initial condition, namely, density (g/cm3), areal density (g/cm2), and temperature (KeV), internal breeding of tritium takes place. Internal breeding of tritium means that the remaining amount of tritium after the burning of fuel is equal to initial content. However, the low gain of fuel pellet is still the main failure of this fuel configuration.
The other solution for the above problem is adding to fuel to form a new configuration as , where is the ratio of tritium to deuterium, and is the ratio of helium-3 to deuterium in the initial pellet. It has been shown that the configuration fuel as , and in the same initial conditions as those described for the case just mentioned, internal breeding of tritium and helium-3 takes place. Furthermore, the energy gain is increased and neutrons produced are decreased due to the reduction in the initial content of deuterium and tritium.
When the size of the fusion fuel pellet is comparable with the thermalization range of fusion products, a fraction of the energy will escape from the burning pellet. This fraction was calculated for , with the same initial conditions but was not applied for burn propagation simulation . In an earlier study, we inserted the energy leakage probability to the relevant calculations to obtain an ignition condition for configuration fuel in different ratios and densities . In the present study, we applied this effect to recalculate the burn simulation in more detail.
The organization of this paper is as follows. The one-dimensional power balance equations are introduced in Section 2. Energy deposition of charged particles and energy leakage probability are given in Section 3, optical depth are discussed in Section 4, and finally, conclusion is placed in Section 5.
2. One-Dimensional Power Balance Equations
Here we consider thermonuclear reaction starts in a hot spot with radius cm, density of 5000 g/cm3, and temperature of 10 k which has been produced inside the surrounding shell after compression phase. The equation of energy balance for ions, electrons, and radiation are given by where () is the ion (electron) temperature, () is the ion (electron) number density, is the energy leakage probability of the product created in the reaction , and is the fraction of the energy of the product created in the reaction that is deposited into the plasma ions. is the fusion power of product created in the reaction , , and are the mechanical expansion loss power of ion and electron, respectively, and is the thermal conduction of electrons . is the radiation temperature, and is the photon energy loss power .
For the optically thick plasma the mean free path of bremsstrahlung photons is smaller than the plasma radius and radiation can be treated as a photon gas in thermal equilibrium. Thus, a black body radiation spectrum is obtained, and the radiation temperature can be defined. In this case, the reabsorption process, such as inverse bremsstrahlung and inverse Compton effect are more important. Then, we can write the bremsstrahlung loss, , as in the following form: with where is the inverse bremsstrahlung term , and is a relativistic correction term .
From the Planck distribution for the photons, we can easily estimate the inverse Compton scattering contribution. Provided the photons are of low energy, , and the electron temperature moderate, , the energy lost by the electrons in inverse Compton scattering is given by  as follows: where is the Thomson cross-section, and is the classical electron radius.
In a burning plasma, the fusion energy will be deposited mainly into the ions [2, 20]. Therefore, the ion temperature will be higher than the electron temperature, and an energy flow from the ions to the electrons by collisions is expected. In a dense plasma scattering is predominantly quantum mechanical and entails not only the first Fermi-Dirac correction, but also the first classical correction when the electron density starts to increase. is the ion-electron energy exchange term that is achieved by  as follows: where, and is named Coulomb Logarithm, including quantum and degeneracy effects and first classical correction is given by  as follows: where is the leading term in the quantum limit together with the correction that exhibited by, is the first classical correction, and is the first correction when Fermi-Dirac statistics start to become important. The numerical values of the zeta-function and its derivative are in the last line of (2.7), the ratio describes the relative size of the correction, where, is the binding energy of the hydrogen atom. is the thermal wavelength for electron as and is the plasma frequency for spices , where .
The energy gain of burning region is defined as the ratio between the total energy deposited by fusion products and the energy contained in the originally heated plasma, The catalytic regime of tritium is obtained when the final amount of tritium is slightly higher than the initial amount. In this case, external tritium breeding is avoided and is replaced by internal tritium breeding. The internal tritium breeding is defined as
3. Energy Deposition of Charged Particles and Energy Leakage Probability
When two ions fuse together, the energy is yielded from fusion reaction . The reaction product carries with itself a fraction of of energy . Next, the reaction product, , with an energy equal to slows down and deposits a fraction of of its energy to the ions. This fraction is calculated through the following: where is the stopping power of charged particle with an initial energy of which starts to slow down to the final energy of , . Subscripts and represent ions and electrons, respectively.
The distance traversed by a charged particle, , which loses energy from energy to is obtained as
We can now calculate the fraction of the energy the charged particle releases from the pellet of radius . The parameter can be expressed in terms of the radial distance from the center, , the pellet radius, , and the angle between the path and the line passing through the center, , as shown in Figure 1: If the charged particle is produced with uniform probability in the sphere, , the probability of escaping can be calculated as where is the initial energy of the charged particle, and is the energy of the same particle after traversing a distance from the point of birth to the spherical surface. In Figure 2, we illustrate energy leakage probability of charged particles for various reactions during the burning of fuel pellet.
4. Optical Depth
Optical depth is a parameter that determines whether the plasma is optically thick or thin. Since hot photons with are important for the reabsorption process, this parameter is defined by  as follows: where is the radiation energy density of a black body, and is the bremsstra-hlung radiation energy density . When this parameter is greater than unity, the black body radiation spectrum exceeds the number of hot photons and, as a result, plasma becomes optically thick. Earlier studies have shown that the plasma is initially optically thick but rapidly becomes optically thin (transparent) as the electron temperature rises (greater than ~90 KeV) [28, 29]. As shown in Figure 3, the electron temperature cannot be greater than 55 KeV if energy leakage probability is taken into consideration. As a result, burning fusion pellet will not be optically thin during burning time (Figure 4).
In the present study, the effects of burn propagation of a pellet with the configuration with the initial conditions, namely, density (g/cm3), areal density (g/cm2), and temperature (KeV)—taking into consideration energy leakage probability—has been reinvestigated. The results indicate that the electrons’ temperature does not exceed 55 KeV, and the fuel pellet remains optically thick during the burning process. Also, the effects of energy leakage probability resulted in the reduction of energy gain can be reduced to a gain of 70. Figure 5 illustrates internal tritium breeding during the burning process. As Figure 5 shows, energy leakage probability effect brings about a reduction in ITB, and consequently, the final ratio of tritium is less than the primary ratio.
- J. D. Lindl, Inertial Confinement Fusion, Springer, New York, NY, USA, 1998.
- S. Atzeni and J. Meyer-ter-Vehn, The Physics of Inertial Fusion, Oxford University Press, Oxford, UK, 2004.
- National Ignition Facility, https://lasers.llnl.gov/.
- C. Cherfils-Clérouin, C. Boniface, M. Bonnefille et al., “Progress on LMJ targets for ignition,” Plasma Physics and Controlled Fusion, vol. 51, no. 12, Article ID 124018, 8 pages, 2009.
- J. Dawson, Fusion, vol. 2, Academic Press, New York, NY, USA, 1981.
- P. T. Leon, S. Eliezer, J. M. Martinez-Val, and M. Pirea, “Fusion burning waves in degenerate plasmas,” Physics Letters A, vol. 289, pp. 135–140, 2001.
- M. Mahdavi, B. Kaleji, and T. Koohrokhi, “Bremsstrahlung radiation in deuterium/tritium degenerate plasma,” Modern Physics Letters B, vol. 24, no. 30, pp. 2939–2945, 2010.
- S. Eliezer, P. T. León, J. M. Martinez-Val, and D. V. Fisher, “Radiation loss from inertially confined degenerate plasmas,” Laser and Particle Beams, vol. 21, no. 4, pp. 599–607, 2003.
- H. Totsuji, “Bremsstrahlung in high-density plasmas,” Physical Review A, vol. 32, no. 5, pp. 3005–3010, 1985.
- S. Eliezer and J. M. Martínez-Val, “Proton-boron-11 fusion reactions induced by heat-detonation burning waves,” Laser and Particle Beams, vol. 16, no. 4, pp. 581–598, 1998.
- S. Son and N. J. Fisch, “Aneutronic fusion in a degenerate plasma,” Physics Letters A, vol. 329, pp. 76–82, 2004.
- H. Hora, G. H. Miley, F. Osman, et al., “Single-event high-compression inertial confinement fusion at low temperatures compared with two-step fast ignitor,” Journal of Plasma Physics, vol. 69, pp. 413–429, 2003.
- S. Son and N. J. Fisch, “Pycnonuclear reaction and possible chain reactions in an ultra-dense DT plasma,” Physics Letters A, vol. 337, pp. 397–407, 2005.
- S. Son and N. J. Fisch, “Current-drive efficiency in a degenerate plasmaPhysical Review Letters,” vol. 95, no. 22, Article ID 225002, 4 pages, 2005.
- P. T. Leon, S. Eliezer, and J. M. Martinez-Val, “Fusion energy in degenerate plasmas,” Physics Letters A, vol. 343, pp. 181–189, 2005.
- S. Son and N. J. Fisch, “Controlled fusion with hot-ion mode in a degenerate plasma,” Physics Letters A, vol. 356, pp. 65–71, 2006.
- S. Son and N. J. Fisch, “Ignition regime for fusion in a degenerate plasma,” Physics Letters A, vol. 356, pp. 72–78, 2006.
- S. Eliezer, Z. Henis, J. M. Martínez-Val, and M. Piera, “Deuterium-tritium fusion reactors without external tritium breeding,” Physics Letterss A, vol. 243, no. 5-6, pp. 311–318, 1998.
- A. Gsponer and J. P. Hurni, “Comment on “deuterium-tritium fusion reactors without external fusion breeding” by S. Eliezer et al. (Phys. Lett. A 243 (1998) 311),” Physics Letters A, vol. 253, no. 1-2, pp. 119–121, 1999.
- K. Ghosh and S. V. G. Menon, “Energy deposition of charged particles and neutrons in an inertial confinement fusion plasma,” Nuclear Fusion, vol. 47, pp. 1176–1183, 2007.
- M. Mahdavi and T. Koohrokhi, “Energy leakage probability effect on ignition condition in AN inertial confinement fusion plasma,” International Journal of Modern Physics B, vol. 25, no. 27, pp. 3611–3622, 2011.
- S. Eliezer, Z. Henis, J. M. Martinez-val, and I. Vorbeichik, “Effects of different nuclear reactions on internal tritium breeding in deuterium fusion,” Nuclear Fusion, vol. 40, no. 2, p. 195, 2000.
- R. Weymann, “Diffusion approximation for a photon gas interacting with a plasma via the compton effect,” Physics of Fluids, vol. 8, no. 11, pp. 2112–2114, 1965.
- L. S. Brown, L. Robert, and L. Singleton Jr., “Temperature equilibration rate with Fermi-Dirac statistics,” Physical Review E, vol. 76, Article ID 066404, 21 pages, 2007.
- L. S. Brown and R. L. Singleton Jr., “Temperature equilibration in a fully ionized plasma: electron-ion mass ratio effects,” Physical Review E, vol. 79, Article ID 066407, 2009.
- C. K. Li and R. D. Petrasso, “Charged-particle stopping powers in inertial confinement fusion plasmas,” Physical Review Letters, vol. 70, no. 20, pp. 3059–3062, 1993.
- J. D. Huba, NRL Plasma Formulary, vol. 20375, Naval Research Laboratory, Washington, DC, USA, 2009.
- M. Mahdavi and B. Kaleji, “Deuterium/helium-3 fusion reactors with lithium seeding,” Plasma Physics and Controlled Fusion, vol. 51, no. 8, Article ID 085003, 11 pages, 2009.
- M. Mahdavi and T. Koohrokhi, “Simultaneous catalytic regime of tritium and helium-3 in D-D fusion without external breeding,” Pramana, vol. 74, no. 3, pp. 377–390, 2010.