- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Submit a Manuscript
- Table of Contents
ISRN Materials Science
Volume 2012 (2012), Article ID 106484, 6 pages
doi:10.5402/2012/106484
Development of Piezoelectric Ultrasonic Thrombolysis Device for Blood Clot Emulsification
1Division of Materials Technology, School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore
2Lee Kong Chian School of Medicine, Nanyang Technological University, 50 Nanyang Drive, 637553, Singapore
3National University Heart Centre, National University of Singapore, 5 Lower Kent Ridge Road, 119074, Singapore
4National University Health System, National University of Singapore, 1E, Kent Ridge Road, 119228, Singapore
Received 15 February 2012; Accepted 13 March 2012
Academic Editors: M. Martino and Y. Zhou
Copyright © 2012 Tao Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
Tao Li, Jan Ma, S. Dinesh Kumar, and Adrian F. Low, “Development of Piezoelectric Ultrasonic Thrombolysis Device for Blood Clot Emulsification,” ISRN Materials Science, vol. 2012, Article ID 106484, 6 pages, 2012. doi:10.5402/2012/106484