- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Submit a Manuscript
- Table of Contents
ISRN Soil Science
Volume 2012 (2012), Article ID 375842, 7 pages
Applicability of Hydrus-1D in a Mediterranean Mountain Area Submitted to Land Use Changes
1Department of Agronomy and Food Engineering and Biotechnology, Poltechnicy University of Catalonia, 08860 Castelldefels, Spain
2Department of Environmental Biophysics and Soils, LAB-FERRER Consulting Center, 25200 Cervera, Spain
3CREAF, Autonomous University of Barcelona, 08193 Bellaterra, Spain
Received 17 December 2011; Accepted 1 February 2012
Academic Editors: M. Bernoux and M. Wanner
Copyright © 2012 Carles M. Rubio and Rafael Poyatos. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
The aim of this research is to evaluate the reliability and accuracy of the Hydrus-1D model to simulate the measured dynamics of water flow in a silt loam soil profile located in an abandoned crop area. The paper includes a physical and chemical characterization of the soil, and hydraulic properties characteristics as well. Several techniques and devices were used to develop the experiment in both, field and laboratory scales. The last part of the study was the Hydrus-1D simulation using real rain events and evapotranspiration rates. In summary, it could predict accurately the water dynamics of this “natural” scenario.
During the last decades, numerical models have been increasingly used to predict and to analyse water flow and solute transport in the unsaturated zone. Although a number of analytical approaches have been developed to solve water flow equations [1, 2], conceptual and numerical difficulties still exist, especially at the transient scale flow and with multidimensional field applications .
Soil macropores have been studied as a very important factor in the movement of water in both vertical and lateral directions [4–6]. Soil porosity largely determines soil hydraulic conductivity , usually represented by a lognormal function related with a high heterogeneity of pore size, and showing high increases when water content into the porous media increases.
Quantitative studies of soil water transport due to macropore flow have resulted in several empiric and theoretical approaches aimed at describing such process. Physical models, usually derived from Darcy’s law, for example, [8, 9], including some of these as are Green and Ampt , Philip , and van Genuchten , which explain different patterns of water flow into the soil matrix.
Following authors such as Skopp , Flühler et al.  or Jarvis  can observe that water flow into the soil presents certain instability, which can be due to the characteristics of the flow itself, and to structural features of the soil. The latter include water repellence, the slope of the different layers in the soil matrix , and swelling-shrinking processes, which involve a nonrigid soil as well.
Some of these unsteady water flows, mainly the preferential flow, can be especially important in soils with high swelling-clay content, enhancing the risk of pollution by agricultural chemicals when the hydraulic conductivity values increase. In addition, the specific characteristics of the local area also influence water pathways. Christiansen et al. , in a recent study, showed that preferential flow varied significantly with topography and groundwater within a basin.
Many field studies have shown the importance of preferential flow in crop fields and areas with artificial drainage networks. This flow is described by different conceptual models based on the classic Richards equation , which explain the behaviour of a vertical transient flux in an unsaturated area. The most useful models are double porosity and multi-porosity and double permeability and multipermeability [15, 18–20]. These models assume that the porous media is divided in two different regions, one associated at the interaggregate porosity and the other at the intra-aggregate porosity. Hence, we would like to emphasize some of these models, for example, SWATRER , SWMII , CHAIN-2D , and especially HYDRUS-1D , which will be used in this study.
Land use changes involve landscape and vegetation shifts, which ultimately influence the physical characteristics of hillslopes and soils [25, 26]. Tillage techniques involve soil alterations which can lead to an increased water retention capacity [27, 28]. The presence of certain plant species can enhance soil organic matter hydrophobic properties . Structural stability may also vary with land use changes, involving a degradation of this soil property, and decreasing the permeability and porous media volume [30, 31]. The abandonment of cultivation in montane areas usually results in the increase of meadow and forest surface. The changes in the vegetation suggest changes in the organic matter content, structural stability, and aggregate size, and hence in bulk density and porosity, especially at surface soil level according to [32, 33]. Also, these changes have shown an increase in soil microbial activity, which influences soil hydrodynamic properties such as infiltration rates and hydraulic conductivity [34, 35].
Afforestation processes following agricultural abandonment in mountain areas due to socioeconomic changes have led to a significant increase in forest cover throughout upland areas in Northern Spain. Geomorphological and hydrological processes associated to these land-use changes have been intensively studied at the Vallcebre experimental basins (Eastern Pyrenees, NE Spain). At this site, the terraced topography influences the spatial patterns of the soil moisture  and runoff processes [37–39]. Besides, a 25% increase in forest cover during the second half of the XXth century [36, 40] may indirectly affect soil physical properties and therefore water movement in the soil.
The objective of this study is to evaluate the reliability and accuracy of the Hydrus-1D model  to simulate the measured dynamics of water flow in a silt loam soil profile located in a terraced hillslope whose cultivation was abandoned during the XXth century and which was overgrown with pasture. For this purpose, the main objective has been addressed in four distinct tasks: (i) to determine the hydraulic properties of the soil profile, (ii) to parameterise the van Genuchten model and field saturated hydraulic conductivity, (iii) to calibrate Hydrus-1D using the matric potentials obtained for the initial boundary conditions; (iv) to evaluate Hydrus-1D model using water contents and pressure heads.
2. Materials and Methods
The Can Vila research basin (0.56 km2) is located in the head basin of the Llobregat River, northeast of Spain (42°12 N; 1°49 E) (Figure 1). The topography of Can Vila basin presents a modified hill slopes series in terraced landscape, with an altitude between 1100 and 1600 m a.s.l. The climate is warm temperate (Papadakis classification) with a mean annual temperature of 7.3°C and an average annual precipitation rate of 924 mm, being spring and autumn the wettest seasons. The evaporation and transpiration rate is 700 mm . The climactic vegetation of the study area is Quercus pubetcens forest although at present Aphyllantion-type calciophilous grassland  is dominant in the terraced areas, together with spontaneous afforestation patches of Pinus sylvestris with a poor Buxus sempervirens shrub cover . The soils, which can be classified as Ochrepts, Orthents, and Aquepts according to soil taxonomy system , present a high spatial variability, especially in the infiltration rates. During wetting-up conditions, saturation patches appear in the inner part of the terraces, underlain by mudstones with low-infiltration capacity which appeared after terrace construction. These terraces are drained by an artificial channel network [38, 45].
2.1. Hydraulic Properties of the Soil Profile
Our experiment was carried out at La Call terrace. The experimental plot is an old abandoned crop terrace located in Can Vila basin. The experimental dataset included water potential data measured at 0.2, 0.4, and 0.6 meters of depth using SKT600 tensiometers (Skye Instruments Ltd.). The data was recorded every 20 minutes by a data-logger DT-500 (DataTaker). For the observed water contents, two time domain reflectometry (TDR) profiles (A and B) were used. The profile A was located in the inner part of the terrace and profile B in the middle part of the same terrace. Water content data were collected between surface and 0.6 meters of depth, using 3 TDR probes of 0.2 meters long per profile and a Tektronics 1502C cable tester, for measuring the data. Also, a set of unaltered samples (100 cm3) from a soil profile of the experimental plot were used to characterize the physical, chemical, and hydraulic soil properties. The samples were obtained between surface and 0.85 meters of depth.
Volumetric water content of unaltered samples was determined using the “sand box" method for potentials between saturation and −20 kPa  and the pressure membrane for potentials between −100 and −1500 kPa . Water retention curves were fitted to the van Genuchten model, using the RETC code  obtaining , (residual and saturation volumetric water content, resp.), , and (shape parameters). In addition, the following properties were determined: particle size distribution, bulk density, porosity, calcium carbonate, and organic matter content.
In the same plot, we determined the field-saturated hydraulic conductivity (Kfs), as well. The observed Kfs data were obtained for 3 depths (0.15, 0.25, and 0.50 meters) and 3 replica per depth, using for it the Guelph permeameter method . The diameter of the well was 6 cm.
The rainfall event dataset was obtained with an automatic pluviometer with 0.2 mm of accuracy, and the reference evaporation-transpiration was calculated according to Penman-Monteith equation . Root distribution was based on field observations and the trapezoidal uptake function . The soil water stress reaction was calculated using the S-shape function . The expression is as follow where is the volume of water removed from a unit volume of soil per unit time due to plant water uptake, is the osmotic head, is a prescribed dimensionless function of the soil water pressure head (), is the potential water uptake rate, represents the pressure head at which the water extraction rate is reduced by 50% during conditions of negligible osmotic stress, and is a experimental constant.
2.2. Hydrus-1D Calibration and Validation
To calibrate the model under transient conditions, field data for the period from 28th of September to 30th of November of 2003 (64 days) were used. The different sampled levels presented a high textural homogeneity (Table 1), considering, according to textural classes, only two dissimilar layers: surface to 0.8 m depth (silt loam textural class) and 0.8 m to bottom profile (silty clay loam textural class). Pressure heads were used as initial boundary conditions; initial values were −71.23 kPa at 0.2 m, −67.49 kPa at 0.4 m, and −72.64 kPa at 0.6 m. For the root distribution, we considered −75 cm as the limit of the uptake function. The value used in the h50 parameter from the S-shape function was −359 cm, and the -parameter was equal to 3. In order to improve the simulation of volumetric water contents, the closed form of the van Genuchten model with was used. The model is expressed as where is the soil water pressure head, and are curve shape parameters, and is the relative saturation that is expressed in actual, residual, and saturated volumetric water content (, , ) as
Field-saturated hydraulic conductivities were the mean geometric values obtained for both seasons (wet and dry) at different sampling levels (Table 3). For the first layer (from surface to 0.8 m depth), the Kfs value was 1.64 m·day−1, and for the second layer (from 0.8 cm to bottom profile), the Kfs value was 0.16 m·day−1.
To validate the water content data using Hydrus-1D, the volumetric water contents calculated according to Topp et al.  were used. These data were obtained for the two TDR soil profiles.
3.1. Soil Physical Properties
Table 1 shows the soil properties of the studied profile. The textural class of the profile was classified as silt loam (according to USDA), with silt content always higher than 57 g·kg−1, sand content between 110 g·kg−1 and 210 g·kg−1, and clay content between 200 g·kg−1 and 280 g·kg−1. Mean bulk density was 1.38 Mg·m−3 increasing with depth and yielding a value for total porosity about 47%. Mean organic matter content, about 40 g·kg−1, indicates a high organic carbon content decreasing with depth. Mean calcium carbonate content is reasonably high, about 320 g·kg−1. According to coefficient of variation, the behaviour on the whole soil profile can be considered as a low variability (see Table 1).
3.2. Soil Hydraulic Properties
The water retention curve for the studied plot showed a mean value of soil moisture of about 0.49 m3·m−3 at saturation, 0.33 m3·m−3 at field capacity, and 0.18 m3·m−3 at permanent wilting point. The van Genuchten model (1980) fitted excellently to the observed values ( ranging from 0.94 to 0.99 for ). Table 2 presents different values obtained with the van Genuchten equation, note that -parameter is less than 1.20 except for the deepest sampling level, for which the corresponding value is 1.26. Despite to obtain an excellent fitted values for -parameter, these values were solved for Hydrus-1D using an air entry value −2 cm with -parameter, this fact improved the solution of the problem.
3.3. Simulating Pressure Heads with Hydrus-1D
Figure 2 shows, at daily scale, a simulation for calibration starting in dry conditions, with an accumulated precipitation of about 264.4 mm after a dry period. There were significant differences between the observations and the values predicted by Hydrus-1D. The simulations revealed a significant time delay at deeper levels (0.4 and 0.6 m depth), immediately after the calculations started. The response of the model was slower than that of the measured data, especially at 0.6 cm depth. The model predicted correctly (or only slightly overestimated) observed pressure heads near saturation, but was unable to predict pressure heads during periods without rainfall when water uptake was important, due to high evaporative demand. Pressure head at 0.2 m depth fitted well throughout the simulated period, showing only a slight underestimation at the start of the simulation, after the first rainfall event. The two tensiometric observation points (0.4 and 0.6 m depth) showed a time delay at the start of the simulation. At this moment, the model did not describe well the soil’s fast response immediately after wettingup.
On the other hand, Figure 3 shows a simulation for the same period starting with wet conditions. The results indicated that the response of the model is faster than that measured after initial dry conditions, especially at the deeper levels. An acceptable simulation of the soil wetting-up and transition to saturation was observed, improving the results obtained using dry initial conditions and decreasing the time delay between the first rainfall event and the model response, even though the drying out of the curve is not well represented by the model.
3.4. Simulating Water Contents with Hydrus-1D
The results have shown that Hydrus-1D predicted reasonably well volumetric water content using an air entry value of −2 cm in the van Genuchten equation, obtaining correlation coefficients of about 0.75 ().
The relationship between measured and predicted mean volumetric water contents data for both TDR profiles used for calibration (Figure 4) showed that Hydrus-1D gave an acceptable fit from surface to 0.6 meters of depth. The TDR profile in the inner part of the terrace (profile A) showed the most accurate fit, with less dispersion and a similar trend throughout the simulated period. Profile B located in the outer part of the terrace, and the water contents were overestimated, with larger overestimations after rainfall events about 50 mm·day−1. However, the model described acceptably the wettingup transition period after the first rainfall event.
4. Discussion and Conclusions
The studied soil profiles showed high water content values (at saturation ≅0.50 m3·m−3 and wilting point ≅0.20 m3·m−3). This feature may be related to the high silt and clay content, greater than 75 g·kg−1 for all soil profile [54–57]. Organic matter content close to surface was about 7 g·kg−1 [55, 58, 59]. The information obtained by several soil samples (3 replica per level) of the seven sampling levels for a silt loam soil profile did not improve the Hydrus-1D simulation, because it only used two different materials (or layers) related with the soil textural class.
The values of saturated hydraulic conductivity found in the field test could be a consequence of macropores and preferential flows; note that these soils have high swelling-clay content. In addition, high calcium carbonate content gives a sustaining structure during the macropores formation . This fact would explain the increase in the water contents in the deepest layers, being preferential flow controlled by a macroporous network . Swelling possibly closed the macropores causing a fast reaction of the soil which the model Hydrus-1D could not describe well, needing more time to acquire stability during the simulation. This could explain the poor adjustment of the model during the initial time steps of prediction after dry initial conditions. However, when the soil profile was already moist, the model response improved, not showing the time delay of the deeper levels.
In summary, the simulation of Hydrus-1D using the van Genuchten equation with an air entry value of −2 cm was adequate to estimate soil water contents and pressure heads for a silt loam soil profile located in Can Vila basin, in spite of the differences obtained between observed and predicted data. Our results are comparable to those obtained by other authors [62, 63]. To conclude, we wanted to ascertain that the algorithm of Hydrus-1D solved correctly the Richards equation for this silt loam soil profile under natural conditions. Although the model simulated the pressure head data with some differences, especially in the dryout events, it should be noted that Hydrus-1D is a robust model to predict soil water contents on different scenarios with transient conditions.
This work was funded by the projects PIRIHEROS (REN2003-08678/HID) and CANOA (CGL2004-04919-C02-01/HID). The authors benefited from a postgraduate grant from Ministry of Science and Innovation while carrying out this research. The authors are also indebted to Dr. M. Th. van Genuchten from George E. Brown Jr. Salinity Laboratory, USDA-ARS, USA for helping with determinations and for fruitful discussions. The authors also thank Dr. F. Gallart and Dr. P. Llorens from the Institute of Environmental Assessment and Water Research (CSIC), for their support. Finally, the authors mention to Skye Instruments Ltd., and DataTaker trade marks as a part of scientific soil physical devices used in the research, however, it does not present any financial gain for them.
- R. R. Bruce and A. Klute, “The measurement of soil moisture diffusivity,” Proceedings-Soil Science Society of America, vol. 20, pp. 458–462, 1956.
- Y. Mualem and G. Dagan, “Hydraulic conductivity of soils. Unified approach to the statistical models,” Soil Science Society of America Journal, vol. 42, no. 3, pp. 392–395, 1978.
- F. Abbasi, J. Feyen, and M. T. Van Genuchten, “Two-dimensional simulation of water flow and solute transport below furrows: model calibration and validation,” Journal of Hydrology, vol. 290, no. 1-2, pp. 63–79, 2004.
- W. Schumacher, Die physic des Bodens, Wiegandt & Hempel, Berlin, Germany, 1864.
- J. B. Lawes, J. H. Gilbert, and R. Warington, On the Amount and Composition of the Rain and Drainage Water Collected at Rothamsted, Williams, Clowes and Sons Ltd, London, UK, 1882.
- R. E. Horton, “Remarks on hydrologic terminology,” Eos, Transactions, American Geophysical Union, vol. 23, pp. 479–482, 1942.
- K. Beven and P. Germann, “Macropores and water flow in soils,” Water Resources Research, vol. 18, no. 5, pp. 1311–1325, 1982.
- E. Buckingham, Studies on the Movement of Soil Moisture, U.S. Department of Agriculture, Bull. No. 38, Bureau of Soils, Washington, DC, USA, 1907.
- L. A. Richards, “Capillary conduction of liquids through porous mediums,” Journal of Applied Physics, vol. 1, no. 5, pp. 318–333, 1931.
- W. H. Green and C. A. Ampt, “Studies on soils physics, I. Flow of air and water through soils,” Journal of Agricultural Science, vol. 4, pp. 1–24, 1911.
- J. R. Philip, “The theory of infiltration. 1. The infiltration equation and its solution,” Soil Science, vol. 83, pp. 345–357, 1957.
- M. T. van Genuchten, “A closed-form equation for predicting the hydraulic conductivity of unsaturated soils,” Soil Science Society of America Journal, vol. 44, no. 5, pp. 892–898, 1980.
- J. Skopp, “Comment on Micro-meso and macroporosity of soil,” Soil Science Society of America Journal, vol. 45, no. 6, pp. 1244–1246, 1981.
- H. Flühler, W. Durner, and M. Flury, “Lateral solute mixing processes - A key for understanding field-scale transport of water and solutes,” Geoderma, vol. 70, no. 2–4, pp. 165–183, 1996.
- N. J. Jarvis, “Modeling the impact of preferential flow on nonpoint source pollution,” in Physical Nonequilibrium in Soils: Modeling and Application, H. M. Selim and L. Ma, Eds., pp. 195–221, Ann Arbor Press, Chelsea, Mice, USA, 1998.
- J. M. H. Hendrickx, L. W. Dekker, and O. H. Boersma, “Unstable wetting fronts in water-repellent field soils,” Journal of Environmental Quality, vol. 22, no. 1, pp. 109–118, 1993.
- J. S. Christiansen, M. Thorsen, T. Clausen, S. Hansen, and J. Christian Refsgaard, “Modelling of macropore flow and transport processes at catchment scale,” Journal of Hydrology, vol. 299, no. 1-2, pp. 136–158, 2004.
- K. Pruess and J. S. Y. Wang, “Numerical modelling of isothermal and non-isothermal flow in unsaturated fractured rock. A review,” in Flow and Transport Through Unsaturated Fractured Rock, Geophysics Monograph, D. D. Evans and T. J. Nicholson, Eds., vol. 42, pp. 11–22, American Geophysical Union, Washington, DC, USA, 1987.
- J. P. Gwo, P. M. Jardine, G. V. Wilson, and G. T. Yeh, “A multiple-pore-region concept to modeling mass transfer in subsurface media,” Journal of Hydrology, vol. 164, no. 1–4, pp. 217–237, 1995.
- H. H. Gerke and M. T. Van Genuchten, “A dual-porosity model for simulating the preferential movement of water and solutes in structured porous media,” Water Resources Research, vol. 29, no. 2, pp. 305–319, 1993.
- C. Belmans, J. G. Wesseling, and R. A. Feddes, “Simulation model of the water balance of a cropped soil: SWATRE,” Journal of Hydrology, vol. 63, no. 3-4, pp. 271–286, 1983.
- T. Vogel, “SWMII-Numerical model of two dimensional flow in a variably saturated porous medium,” Research Report 87, Department of Hydraulics and Basin Hydrology , Agricultural University, Wageningen, The Netherlands, 1987.
- J. Simunek and M. T. van Genuchten, “The CHAIN-2D code for simulating two-dimensional movement of water flor, heat and multiple solutes in variably-saturated porous media, Version 1.1,” Research Report 136, U.S. Salinity Laboratory, USDA, ARS, Riverside, Calif, USA, 1994.
- J. Simunek, K. Huang, M. Sejna, and M. Th. van Genuchten, “The HYDRUS-1D software package for simulating the one-dimensional movement of water, heat and multiple solutes in variable-saturated media. Version 1.0,” Tech. Rep. IGWMC-TPS-70, International Ground Water Center, Colorado School of Mines, Golden, Colorado, 1998, 162p.
- P. H. T. Beckett and R. Webster, “Soil variability: a review,” Soil and Fertilizers, vol. 34, pp. 1–15, 1971.
- R. L. Schafer, C. E. Johnson, A. J. Koolen, S. C. Gupta, and R. Horn, “Future research needs in soil compaction,” Transactions of the American Society of Agricultural Engineers, vol. 35, no. 6, pp. 1761–1770, 1992.
- F. Pelegrín and F. Moreno, “Study of water infiltration in the soil under different tillage systems,” 1990, ISHS Acta Horticulturae 335: International Symposium on Irrigation of Horticultural Crops.
- F. Moreno, F. Pelegrín, J. E. Fernández, and J. M. Murillo, “Soil physical properties, water depletion and crop development under traditional and conservation tillage in southern Spain,” Soil and Tillage Research, vol. 41, no. 1-2, pp. 25–42, 1997.
- D. F. Scott and R. E. Schulze, “The hydrological effects of a wild-fire in a eucalypt afforested cachtment,” Southern African Forestry Journal, vol. 160, pp. 67–74, 1992.
- W. B. Voorhees, W. W. Nelson, and G. W. Randall, “Extent and persistence of subsoil compaction caused by heavy axle loads,” Soil Science Society of America Journal, vol. 50, no. 2, pp. 428–433, 1986.
- B. C. Ball, D. J. Campbell, J. T. Douglas, J. K. Henshall, and M. F. O'Sullivan, “Soil structural quality, compaction and land management,” European Journal of Soil Science, vol. 48, no. 4, pp. 593–601, 1997.
- A. C. Imeson, F. Perez-Trejo, H. Lavee, and A. Calvo-Cases, “Modelling and exploring the impacto f climate change on ecosystem degradation, hydrology and land use along a transect across the Mediterranean,” in Global Change: Climate Change and Climate Change Impacts, I. Troen, Ed., pp. 173–185, Proceed. Copenhagen Symposium, European Commission, EUR-15921, Brussels, Belgium, 1994.
- M. Shoshany, P. Kutiel, and H. Lavee, “Monitoring temporal vegetation cover changes in Mediterranean and arid ecosystems using a remote sensing technique: case study of the Judean Mountain and the Judean Desert,” Journal of Arid Environments, vol. 33, no. 1, pp. 9–21, 1996.
- B. Hermawan and K. C. Cameron, “Structural changes in a silt loam under long-term conventional or minimum tillage,” Soil and Tillage Research, vol. 26, no. 2, pp. 139–150, 1993.
- M. Langmaack, “Earthworm communities in arable land influenced by tillage, compaction, and soil,” Zeitschrift fur Okologie und Naturschutz, vol. 8, no. 1-2, pp. 11–21, 1999.
- C. M. Rubio, Hidrodinámica de los suelos de un área de montaña media mediterránea sometida a cambios de uso y cubierta, Ph.D. thesis, Universitat Autònoma de Barcelona, Barcelona, Spain, 2005, 195p.
- S. Haro, J. F. Fernandez, R. Josa, and F. Gallart, “Papel hidrológico y geomorfológico de las propiedades del suelo en una zona Pirenaica de campos abandonados Cal Parisa, Vallcebre,” in Estudios de Geomorfología en España. S.E.G., F. Lopez-Bermudez, C. Conesa, and M. A. Romero, Eds., pp. 243–250, Sociedad Española de Geomorfologia, Murcia, Spain, 1992.
- F. Gallart, P. Llorens, and J. Latron, “Studying the role of old agricultural terraces on runoff generation in a small Mediterranean mountainous basin,” Journal of Hydrology, vol. 159, no. 1–4, pp. 291–303, 1994.
- F. Gallart, J. Latron, P. Llorens, and D. Rabadà, “Hydrological functioning of mediterranean mountain basins in Vallcebre, Catalonia: some challenges for hydrological modelling,” Hydrological Processes, vol. 11, no. 9, pp. 1263–1272, 1997.
- R. Poyatos, J. Latron, and P. Llorens, “Land use and land cover change after agricultural abandonment: the case of a Mediterranean Mountain area (Catalan Pre-Pyrenees),” Mountain Research and Development, vol. 23, no. 4, pp. 362–368, 2003.
- F. Gallart, P. Llorens, J. Latron, and D. Regüés, “Hydrological processes and their seasonal controls in a small Mediterranean mountain catchment in the Pyrenees,” Hydrology and Earth System Sciences, vol. 6, no. 3, pp. 527–537, 2002.
- R. Guardia and J. M. Ninot, “Distribution of the plant communities in the badlands of the upper Llobregat basin (southeastern Pyrenees),” Studia Geobotanica, vol. 12, pp. 83–102, 1992.
- E. Carrillo and J. Vigo, Mapa de Vegetació de Catalunya 1:50.000, Institut d'Estudis Catalans, Barcelona, Spain, 2002.
- Soil Taxonomy, A Basic System of Soil Classification for Making and Interpreting Soil Surveys, United States Department of Agriculture, Natural Resources Conservation Service, Washington, DC, USA, 1996.
- P. Llorens, J. Latron, and F. Gallart, “Analysis of the role of agricultural abandoned terraces on the hydrology and sediment dynamics in a small mountainous basin. (High Llobregat, eastern Pyrenees),” Pirineos, vol. 139, pp. 27–46, 1992.
- W. P. Stakman, G. A. Valk, and G. G. van der Harst, Determination of Soil Moisture Retention Curves. I. Sand-Box Apparatus, ILRI, Wageningen, The Netherlands, 1969.
- L. A. Richards, “Pressure membrane apparatus: construction and use,” Agricultural Engineering, vol. 28, pp. 451–454, 1947.
- M.Th. van Genuchten, F. J. Leij, and S. R. Yates, “The RETC code for quantifying the hydraulic functions of unsaturated soils,” Tech. Rep. EPA/600/2-91/065, U.S. Environmental Protection Agency, Ada, Okla, USA, 1991, 85p.
- W. D. Reynolds and D. E. Elrick, “In situ measurement of field-saturated hydraulic conductivity, sorptivity and α-parameter using the Guelph permeameter,” Soil Science, vol. 140, pp. 292–302, 1985.
- M. Smith, R. G. Allen, J. L. Monteith, A. Perrier, L. Pereira, and A. Segeren, “Report of the expert consultation on procedures for revision of FAO guidelines for prediction of crop water requirements,” Tech. Rep., United Nations-Food and Agriculture Organization, Rome, Italy, 1992, 54p.
- W. R. Gardner, “Water uptake and salt distribution patterns in saline soils,” in Isotope and Radiation Techniques in Soil Physics and Irrigation Studies, pp. 335–341, International Atomic Energy Agency, Vienna, Austria, 1967.
- M.Th. van Genuchten, “A numerical model for water and solute movement in and below the root zone,” Reseach Report 121, U.S. Salinity Laboratory, USDA, ARS, Riverside, Calif, USA, 1987.
- G. C. Topp, J. L. Davis, and A. P. Annan, “Electromagnetic determination of soil water content: measurements in coaxial transmission lines,” Water Resources Research, vol. 16, no. 3, pp. 574–582, 1980.
- S. C. Gupta and W. E. Larson, “Estimating soil water retention characteristics from particle size distribution, organic matter percent, and bulk density,” Water Resources Research, vol. 15, no. 6, pp. 1633–1635, 1979.
- W. J. Rawls, Y. A. Pachepsky, J. C. Ritchie, T. M. Sobecki, and H. Bloodworth, “Effect of soil organic carbon on soil water retention,” Geoderma, vol. 116, no. 1-2, pp. 61–76, 2003.
- C. M. Rubio, “Applicability of site-specific pedotransfer functions and rosetta model for the estimation of dynamic soil hydraulic properties under different vegetation covers,” Journal of Soils and Sediments, vol. 8, no. 2, pp. 137–145, 2008.
- C. M. Rubio, P. Llorens, and F. Gallart, “Uncertainty and efficiency of pedotransfer functions for estimating water retention characteristics of soils,” European Journal of Soil Science, vol. 59, no. 2, pp. 339–347, 2008.
- G. W. Bloemen, “Calculation of hydraulic conductivities from texture and organic matter content,” Zeitschrift für Pflanzenernährung und Bodenkunde, vol. 143, pp. 581–605, 1980.
- J. M. Buttle and D. A. House, “Spatial variability of saturated hydraulic conductivity in shallow macroporous soils in a forested basin,” Journal of Hydrology, vol. 203, no. 1–4, pp. 127–142, 1997.
- A. Solé, F. Plana, F. Gallart, R. Josa, G. Pardini, and R. Aringhieri, “How mudrock and soil physical properties influence badland formation at Vallcebre (Pre-Pyrenees, NE Spain),” Catena, vol. 19, no. 3-4, pp. 287–300, 1992.
- F. Gérard, M. Tinsley, and K. U. Mayer, “Preferential flow revealed by hydrologic modeling based on predicted hydraulic properties,” Soil Science Society of America Journal, vol. 68, no. 5, pp. 1526–1538, 2004.
- J. A. de Vos, J. Simunek, P. A. C. Raats, and R. A. Feddes, “Identification of the hydraulic properties of a layered silt loam,” in Characterization and Measurement of the Hydraulic Properties of Unsaturated Porous Media. Part 2, M.Th. van Genuchten, F. J. Leij, and L. Wu, Eds., pp. 783–798, U.S. Salinity Laboratory, USDA, ARS, Riverside, Calif, USA, 1999.
- D. Wildenschild, J. W. Hopmans, and J. Simunek, “Flow rate dependence of soil hydraulic characteristics,” Soil Science Society of America Journal, vol. 65, no. 1, pp. 35–48, 2001.