- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Submit a Manuscript
- Table of Contents
Volume 2013 (2013), Article ID 282481, 8 pages
Analytical Solution of Nonlinear Boundary Value Problem for Fin Efficiency of Convective Straight Fins with Temperature-Dependent Thermal Conductivity
1Department of Mathematics, The Madura College, Madurai 625011, TN, India
2Madurai Sivakasi Nadars Pioneer Meenakshi Women’s College, Poovanthi 630611, Sivaganga District, TN, India
Received 9 July 2013; Accepted 2 August 2013
Academic Editors: R. R. Burnette, E. Curotto, and I. Kim
Copyright © 2013 K. Saravanakumar et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
We have employed homotopy analysis method (HAM) to evaluate the approximate analytical solution of the nonlinear equation arising in the convective straight fins with temperature-dependent thermal conductivity problem. Solutions are presented for the dimensionless temperature distribution and fin efficiency of the nonlinear equation. The analytical results are compared with previous work and satisfactory agreement is noted.
The discipline of heat transfer, typically considered an aspect of mechanical engineering and chemical engineering, deals with specific applied methods by which thermal energy in a system is generated, or converted, or transferred to another system. Heat transfer includes the mechanisms of heat conduction, thermal radiation, and mass transfer. The analysis of extended surface heat transfer is extensively presented by Kraus et al. . Arslanturk  used decomposition method to evaluate the temperature distribution and analytical expression for the fin efficiency.
In the study of heat transfer, a fin is a surface that extends from an object to increase the rate of heat transfer to or from the environment by increasing convection. Incropera and Dewitt  presented a series of studies on the topic of heat transfer. Mokheimer  discussed a series of fin-efficiency curves for annular fins of rectangular, constant heat flow area, triangular, concave parabolic, and convex parabolic profiles for a wide range of radius ratios, and the dimensionless parameter based on the locally variable heat transfer coefficient. The optimum dimensions of circular fins with variable profile and temperature-dependent thermal conductivity have been obtained by Zubair et al. . A new approach to calculate thermal performance of a singular fin with variable thermal properties has been presented by Kou et al. .
Joneidi et al.  studied an analytical solution of fin efficiency of convective straight fins with temperature-dependent thermal conductivity by the DTM. In this present paper, we first apply homotopy analysis method to obtain an approximation of analytical expression of fin efficiency of convective straight fins with temperature-dependent thermal conductivity. This problem is compared with Joneidi et al. .
2. Mathematical Formulation of the Boundary Value Problem
Consider a straight fin with a temperature-dependent thermal conductivity, arbitrary constant cross-sectional area ; perimeter and length (see Figure 1). The fin is attached to a base surface of temperature and extends into a fluid of temperature , and its tip is insulated. The one-dimensional energy balance equation is given as follows where is the temperature, is the temperature-dependent thermal conductivity of the fin material, is the fin perimeter, and is the heat transfer coefficient. The thermal conductivity of the fin material is assumed as follows: where is the thermal conductivity at the ambient fluid temperature of the fin and is the parameter describing the variation of the thermal conductivity. The following dimensionless parameters are introduced : Using the previous dimensionless variables, the dimensionless form of (1) becomes as follows: where is the dimensionless temperature, is the dimensionless coordinate, is the dimensionless parameter describing thermal conductivity, and is the thermogeometric fin parameter. The boundary conditions are given as follows:
3. Fin Efficiency
The heat transfer rate from the fin is found by using Newton’s law of cooling.
Consider The ratio of the fin heat transfer rate to the heat transfer rate of the fin if the entire fin was at the base temperature is commonly called as the fin efficiency:
4. Approximation of Analytical Solution
4.1. Homotopy Analysis Method (HAM)
The homotopy analysis method employs the concept of the homotopy from topology to flexibly generate a convergent series solution for nonlinear systems. The HAM [8–13] was devised by Shijun Liao which is a powerful analytical method for solving nonlinear problems. The greater generality of this method often allows for strong convergence of the solution over larger spacial and parameter domains. This method provides an analytical solution in terms of an infinite power series. However, there is a practical need to evaluate this solution and to obtain numerical values from the infinite power series. In order to investigate the accuracy of the homotopy analysis method (HAM) solution with a finite number of terms, the system of differential equations was solved.
The homotopy analysis method  is a good technique comparing to another perturbation method. The HAM gives excellent flexibility in the expression of the solution and how the solution is explicitly obtained. Different from all reported perturbation and nonperturbative techniques, the homotopy analysis method itself provides us with a convenient way to control and adjust the convergence region and rate of approximation series, when necessary. Briefly speaking, the homotopy analysis method has the following advantages: it is valid even if a given nonlinear problem does not contain any small/large parameters at all; it can be employed to efficiently approximate a nonlinear problem by choosing different sets of base functions. In this paper, we employ HAM (see Appendix A) to solve the nonlinear equation.
4.2. Solution of Dimensionless Temperature
4.3. Determination of Fin Efficiency
5. Comparison with Previous Work (Joneidi et al. )
Joneidi and coworker  obtained the closed form of the solution of (1) using DTM (Tables 1 and 2) as follows: The value of can be obtained from the following equation: The solution of fin efficiency is
Equation (8) (this work) and (Equation (11)) (previous work) represent the analytical expressions of temperature for all values of parameters. Among these two expressions our result is the simplest one.
Figure 2 represents dimensionless temperature distribution versus the dimensionless coordinate for various values of using (8). From this figure, it is clear that when increases (i.e., the fin length increases or the cross-sectional area of the fin decreases), the dimensionless temperature decreases.
Figure 3 illustrates the temperature distribution of the fin for different values of and . Figure 3(a) depicts the effect of the thermal conductivity on the temperature . According to (8) the temperature increases when the thermal conductivity of the fin increases for all values of . As an observation, in (10), it can be concluded that the fin efficiency also increases. It is noted that the temperature on fin increases when increases (see Figure 3(b)) for the fixed value of .
Figure 4 shows the fin efficiency as a function of thermogeometric fin parameter for different values of the thermal conductivity parameter using (10). From this figure, it can be seen that the fin efficiency decreases as increases. However, the fin efficiency increases as the thermal conductivity increases.
There are two main goals that we aimed for this work. The first is to employ the powerful homotopy analysis method to investigate nonlinear differential equation arising in convective straight fins with temperature-dependent thermal conductivity problem. The second is to achieve good results in predicting the solution of the heat transfer equations in engineering. The two goals are achieved successfully. In HAM, we can choose in an appropriate way which controls the convergence of the series.
A. Basic Idea of Liao’s  Homotopy Analysis Method
Consider the following differential equation : where is a nonlinear operator, denotes an independent variable, and is an unknown function. For simplicity, we ignore all boundary or initial conditions, which can be treated in the similar way. By means of generalizing the conventional homotopy method, Liao constructed the so-called zero-order deformation equation as follows: where is the embedding parameter, is a nonzero auxiliary parameter, is an auxiliary function, is an auxiliary linear operator, is an initial guess of , and is an unknown function. It is important that one has great freedom to choose auxiliary unknowns in HAM. Obviously, when and , it holds: respectively. Thus, as increases from 0 to 1, the solution varies from the initial guess to the solution . Expanding in Taylor series with respect to , we have where If the auxiliary linear operator, the initial guess, the auxiliary parameter , and the auxiliary function are so properly chosen, the series equation (A.4) converges at , then we have Define the vector
Differentiating (A.2) for times with respect to the embedding parameter , then setting , and finally dividing them by !, we will have the so-called th-order deformation equation as follows: where Applying on both sides of (A.8), we get
In this way, it is easily to obtain for , at th order, we have When , we get an accurate approximation of the original (A.1). For the convergence of the above method we refer the reader to Liao . If (A.1) admits unique solution, then this method will produce the unique solution. If (A.1) does not possess unique solution, the HAM will give a solution among many other (possible) solutions.
B. Solution of (4) Using Homotopy Analysis Method
In this appendix, we indicate how (8) in this paper is derived. The homotopy analysis method was constructed to determine the solution of (4)-(5) as follows: In order to solve (B.1) by means of the HAM, we first construct the zeroth-order deformation equation by taking .
Consider The approximate solution of (B.2) is as follows: Substituting (B.3) into (B.1) and comparing the coefficients of like powers of , we get The boundary conditions are Now applying the boundary conditions (B.7) in (B.4) we get Substituting the value of in (B.5) and solving the equation using the boundary conditions (B.8), we obtain the following results: Upon solving (B.6) by substituting the values of and and using the boundary conditions equation (B.8), we can find the following results:
C. Determining the Region of for Validity
The analytical solution should converge. It should be noted that the auxiliary parameter controls the convergence and accuracy of the solution series. The analytical solution represented by (8) contains the auxiliary parameter , which gives the convergence region and rate of approximation for the homotopy analysis method. In order to define the region such that the solution series is independent of , a multiple of curves are plotted. The region where the dimensionless temperature and versus is a horizontal line known as the convergence region for the corresponding function. The common region among and its derivatives are known as the overall convergence region. To study the influence of on the convergence of solution, -curves of and are plotted in Figures 5(a) and 5(b), respectively, for . These figures clearly indicate that the valid region of is about −0.86 to −0.82. Similarly, we can find the value of the convergence control parameter for different values of the constant parameters.
|:||Cross-sectional area of the fin (m2)|
|:||Fin length (m)|
|:||Heat transfer coefficient (W m−1 K−1)|
|:||Thermal conductivity of the fin material (W m−1 K−1)|
|:||Thermal conductivity at the ambient fluid temperature (W m−1 K−1)|
|:||Thermal conductivity at the base temperature (W m−1 K−1)|
|:||Fin perimeter (m)|
|:||Heat-transfer rate (W)|
|:||Temperature of surface (K)|
|:||Temperature of surface (K)|
|:||Distance measured from the fin tip (m).|
|:||The slope of the thermal conductivity-temperature curve|
|:||Dimensionless parameter describing variation of the thermal conductivity|
|:||Thermogeometric fin parameter|
This work is supported by the University Grant Commission (UGC) Minor project no. F. MRP-4122/12 (MRP/UGC-SERO), Hyderabad, Government of India. The authors are thankful to Shri. S. Natanagopal, Secretary at the Madura College Board, and Dr. R. Murali, Principal at the Madura College (Autonomous), Madurai, Tamil Nadu, India, for their constant encouragement.
- A. Kraus, A. Aziz, and J. Welty, Extended Surface Heat Transfer, John Wiley & Sons, New York, NY, USA, 2001.
- C. Arslanturk, “A decomposition method for fin efficiency of convective straight fins with temperature-dependent thermal conductivity,” International Communications in Heat and Mass Transfer, vol. 32, no. 6, pp. 831–841, 2005.
- F. P. Incropera and D. P. Dewitt, Introduction to Heat Transfer, John Wiley & Sons, New York, NY, USA, 3rd edition, 1996.
- E. M. A. Mokheimer, “Performance of annular fins with different profiles subject to variable heat transfer coefficient,” International Journal of Heat and Mass Transfer, vol. 45, no. 17, pp. 3631–3642, 2002.
- S. M. Zubair, A. Z. Al-Garni, and J. S. Nizami, “The optimal dimensions of circular fins with variable profile and temperature-dependent thermal conductivity,” International Journal of Heat and Mass Transfer, vol. 39, no. 16, pp. 3431–3439, 1996.
- H.-S. Kou, J.-J. Lee, and C.-Y. Lai, “Thermal analysis of a longitudinal fin with variable thermal properties by recursive formulation,” International Journal of Heat and Mass Transfer, vol. 48, no. 11, pp. 2266–2277, 2005.
- A. A. Joneidi, D. D. Ganji, and M. Babaelahi, “Differential Transformation Method to determine fin efficiency of convective straight fins with temperature dependent thermal conductivity,” International Communications in Heat and Mass Transfer, vol. 36, no. 7, pp. 757–762, 2009.
- S. J. Liao, The proposed homotopy analysis technique for the solution of non linear problems [Ph.D. thesis], Shanghai Jiao Tong University, 1992.
- S.-J. Liao, “An approximate solution technique not depending on small parameters: a special example,” International Journal of Non-Linear Mechanics, vol. 30, no. 3, pp. 371–380, 1995.
- S. J. Liao, “On the homotopy analysis method for nonlinear problems,” Applied Mathematics and Computation, vol. 147, no. 2, pp. 499–513, 2004.
- S. J. Liao, “An optimal homotopy-analysis approach for strongly nonlinear differential equations,” Communications in Nonlinear Science and Numerical Simulation, vol. 15, no. 8, pp. 2003–2016, 2010.
- S. J. Liao, The Homotopy Analysis Method in Non Linear Differential Equations, Springer, New York, NY, USA, 2012.
- G. Domairry and H. Bararnia, “An approximation of the analytic solution of some nonlinear heat transfer equations: a survey by using homotopy analysis method,” Advanced Studies in Theoretical Physics, vol. 2, no. 11, pp. 507–518, 2008.
- H. Jafari, C. Chun, and S. M. Saeidy, “Analytical solution for nonlinear gas dynamic Homotopy analysis method,” Applied Mathematics, vol. 4, pp. 149–154, 2009.
- S. J. Liao, Beyond Perturbation Introduction to the Homotopy Analysis Method, Chapman & Hall/CRC, Boca Raton, Fla, USA, 1st edition, 2003.