About this Journal Submit a Manuscript Table of Contents
Abstract and Applied Analysis
Volume 2014 (2014), Article ID 835098, 15 pages
http://dx.doi.org/10.1155/2014/835098
Research Article

Minimum Time Trajectory Optimization of CNC Machining with Tracking Error Constraints

1College of Information and Control Engineering, China University of Petroleum (East China), Qingdao 266580, China
2National Center for Mathematics and Interdisciplinary Sciences (NCMIS), Chinese Academy of Sciences, Beijing 100190, China

Received 22 April 2014; Accepted 30 June 2014; Published 20 July 2014

Academic Editor: Chong Li

Copyright © 2014 Qiang Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Qiang Zhang, Shurong Li, and Jianxin Guo, “Minimum Time Trajectory Optimization of CNC Machining with Tracking Error Constraints,” Abstract and Applied Analysis, vol. 2014, Article ID 835098, 15 pages, 2014. doi:10.1155/2014/835098