Research Article
Vibrational Comfort on Board the Vehicle: Influence of Speed Bumps and Comparison between Different Categories of Vehicle
Table 1
Technical characteristics of VIB 008 vibration dosimeter (user manual VIB 008 – 01 dB).
| | Whole body mode |
| | |
| Linearity domain | 70 dB |
| Dynamic range | 0.04–120 m/s2 |
| Frequency weightings | , , 1/1, 1/3 |
| Broadband weighting | 0.4–3700 Hz |
| Display resolution | 0.01 |
| Recorded magnitudes | Bandpass acceleration | Weighted acceleration | Bandpass and weighted peak and peak-to-peak acceleration | Peak factor | Equivalent acceleration | Display exposure | Mobile RMS vibration MTVV | Vibration dose VDV | Seat efficiency SEAT (option) |
| Configuration | Transducers | Units m/s2, g | Integration time | Reference duration | Time constant |
| Alarm, overload counting | Yes |
| Calculated magnitudes | Av, , A(), A()v, VDV, Fc, MTVV SEAT (option) Measurement time, calculation time |
| Integration time | From 1 s to 60 s by steps of 1 s |
| Spectrum (option) | | Octave | 1 Hz–2 kHz | 1/3 octave | 0.8 Hz–2.5 kHz |
| Signal mode (option) | | Sampling frequency | 256–8192 Hz | Pretrigger | Depends on the calibration frequency from 0 s to 16 s | Maximum duration | — | Posttrigger | — |
|
|
Operating temperature: °C/+50°C (0–95% RH).
|