About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [142 citations: 1–100 of 134 articles]

Articles published in Advances in Acoustics and Vibration have been cited 142 times. The following is a list of the 134 articles that have cited the articles published in Advances in Acoustics and Vibration.

  • S. Graham Kelly, and Clint Nicely, “Free Vibrations of a Series of Beams Connected by Viscoelastic Layers,” Advances in Acoustics and Vibration, vol. 2015, pp. 1–8, 2015. View at Publisher · View at Google Scholar
  • Muhammad Tahir Akhtar, and Akinori Nishihara, “Data-reusing-based filtered-reference adaptive algorithms for active control of impulsive noise sources,” Applied Acoustics, vol. 92, pp. 18–26, 2015. View at Publisher · View at Google Scholar
  • Cheng Yang, Li Cheng, and Zhongyu Hu, “Reducing interior noise in a cylinder using micro-perforated panels,” Applied Acoustics, vol. 95, pp. 50–56, 2015. View at Publisher · View at Google Scholar
  • O. Trushkevych, T. J. R. Eriksson, S. N. Ramadas, S. Dixon, and R. S. Edwards, “Ultrasound sensing using the acousto-optic effect in polymer dispersed liquid crystals,” Applied Physics Letters, vol. 107, no. 5, pp. 054102, 2015. View at Publisher · View at Google Scholar
  • Pablo Zoccali, Giuseppe Cantisani, and Giuseppe Loprencipe, “Ground-vibrations induced by trains: Filled trenches mitigation capacity and length influence,” Construction and Building Materials, vol. 74, pp. 1–8, 2015. View at Publisher · View at Google Scholar
  • Ismail Esen, and Mehmet Akif Koc, “Optimization of a passive vibration absorber for a barrel using the genetic algorithm,” Expert Systems With Applications, vol. 42, no. 2, pp. 894–905, 2015. View at Publisher · View at Google Scholar
  • Tommaso Di Ianni, Luca De Marchi, Alessandro Perelli, and Alessandro Marzani, “Compressive Sensing of Full Wave Field Data for Structural Health Monitoring Applications,” Ieee Transactions On Ultrasonics Ferroelectrics And Frequency Control, vol. 62, no. 7, pp. 1373–1383, 2015. View at Publisher · View at Google Scholar
  • P. Brzeski, T. Kapitaniak, and P. Perlikowski, “Experimental verification of a hybrid dynamical model of the church bell,” International Journal Of Impact Engineering, vol. 80, pp. 177–184, 2015. View at Publisher · View at Google Scholar
  • Hayden A. Burgoyne, and Chiara Daraio, “Elastic-Plastic Wave Propagation in Uniform and Periodic Granular Chains,” Journal Of Applied Mechanics-Transactions Of The Asme, vol. 82, no. 8, 2015. View at Publisher · View at Google Scholar
  • O. Barry, J. W. Zu, and D. C. D. Oguamanam, “Nonlinear Dynamics of Stockbridge Dampers,” Journal Of Dynamic Systems Measurement And Control-Transactions Of The Asme, vol. 137, no. 6, 2015. View at Publisher · View at Google Scholar
  • Christopher J. Bahr, Nikolas S. Zawodny, Brandon Bertolucci, Jian Li, Mark Sheplak, and Louis N. Cattafesta, “A plasma-based non-intrusive point source for acoustic beamforming applications,” Journal Of Sound And Vibration, vol. 344, pp. 59–80, 2015. View at Publisher · View at Google Scholar
  • Ric Porteous, Zebb Prime, Con.J. Doolan, Danielle.J. Moreau, and Vincent Valeau, “Three-dimensional beamforming of dipolar aeroacoustic sources,” Journal of Sound and Vibration, 2015. View at Publisher · View at Google Scholar
  • A. Aladwani, O. Aldraihem, and A. Baz, “Piezoelectric Vibration Energy Harvesting From a Two-Dimensional Coupled Acoustic-Structure System With a Dynamic Magnifier,” Journal Of Vibration And Acoustics-Transactions Of The Asme, vol. 137, no. 3, 2015. View at Publisher · View at Google Scholar
  • K. Ramesh, T. Alwarsamy, and S. Jayabal, “Prediction of cutting process parameters in boring operations using artificial neural networks,” Journal Of Vibration And Control, vol. 21, no. 6, pp. 1043–1054, 2015. View at Publisher · View at Google Scholar
  • Y. H. Chen, G. Y. Jin, and Z. G. Liu, “Vibrational energy flow analysis of coupled cylindrical shell-plate structure with general boundary and coupling conditions,” Proceedings Of The Institution Of Mechanical Engineers Part C-Journal Of Mechanical Engineering Science, vol. 229, no. 10, pp. 1727–1744, 2015. View at Publisher · View at Google Scholar
  • Pengtao Wang, Junwei Su, Lin Gong, Mengyan Shen, Marina Ruths, and Hongwei Sun, “Numerical Simulation and Experimental Study of Resonance Characteristics of QCM-P Devices Operating in Liquid and their Application in Biological Detection,” Sensors and Actuators B: Chemical, 2015. View at Publisher · View at Google Scholar
  • M. Michau, A. Berry, Ph. Micheau, and Ph. Herzog, “Optimal virtual mechanical impedances for the vibroacoustic active control of a thin plate,” The Journal of the Acoustical Society of America, vol. 137, no. 1, pp. 199–207, 2015. View at Publisher · View at Google Scholar
  • Chiara Visentin, Nicola Prodi, Vincent Valeau, and Judicaël Picaut, “Experimental analysis of the relationship between reverberant acoustic intensity and energy density inside long roomsa),” The Journal of the Acoustical Society of America, vol. 138, no. 1, pp. 181–192, 2015. View at Publisher · View at Google Scholar
  • E.J. Avital, and T. Miloh, “Sound scattering and its cancellation by an elastic spherical shell in free space and near a free surface,” Wave Motion, 2015. View at Publisher · View at Google Scholar
  • Delyia Kim, Eldad Jitzhak Avital, and Touvia Miloh, “Sound Scattering and Its Reduction by a Janus Sphere Type,” Advances in Acoustics and Vibration, vol. 2014, pp. 1–11, 2014. View at Publisher · View at Google Scholar
  • Dhirendranath Thatoi, Sasanka Choudhury, and Prabir Kumar Jena Jena, “Fault Diagnosis of Beam-Like Structure Using Modified Fuzzy Technique,” Advances in Acoustics and Vibration, vol. 2014, pp. 1–18, 2014. View at Publisher · View at Google Scholar
  • A. Putra, Y. M. Cheah, N. Muhammad, A. Rivai, and C. M. Wai, “The Effect of Perforation on the Dynamics of a Flexible Panel,” Advances in Acoustics and Vibration, vol. 2014, pp. 1–17, 2014. View at Publisher · View at Google Scholar
  • A. Putra, and A. Y. Ismail, “Normal Incidence of Sound Transmission Loss from Perforated Plates with Micro and Macro Size Holes,” Advances in Acoustics and Vibration, vol. 2014, pp. 1–12, 2014. View at Publisher · View at Google Scholar
  • E. M. Sánchez-Orgaz, F. D. Denia, J. Martínez-Casas, and L. Baeza, “3D Acoustic Modelling of Dissipative Silencers with Nonhomogeneous Properties and Mean Flow,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Shamsul Akmar Ab Aziz, Mohd Zaki Nuawi, Mohd Jailani Mohd Nor, and Dian Darina Indah Daruis, “New Regression Models for Predicting Noise Exposure in the Driver’s Compartment of Malaysian Army Three-Tonne Trucks,” Advances in Mechanical Engineering, vol. 2014, pp. 1–12, 2014. View at Publisher · View at Google Scholar
  • Brian W. Donald, Woutijn J. Baars, Charles E. Tinney, and Joseph H. Ruf, “Sound Produced by Large Area-Ratio Nozzles During Fixed and Transient Operations,” AIAA Journal, pp. 1–12, 2014. View at Publisher · View at Google Scholar
  • Mohammad Reza Isvandzibaei, Hishamuddin Jamaluddin, and Raja Ishak Raja Hamzah, “Frequency analysis of multiple layered cylindrical shells under lateral pressure with asymmetric boundary conditions,” Chinese Journal of Mechanical Engineering, vol. 27, no. 1, pp. 23–31, 2014. View at Publisher · View at Google Scholar
  • Hai-Bin Yang, Yue Li, Hong-Gang Zhao, Ji-Hong Wen, and Xi-Sen Wen, “Acoustic anechoic layers with singly periodic array of scatterers: Computational methods, absorption mechanisms, and optimal design,” Chinese Physics B, vol. 23, no. 10, pp. 104304, 2014. View at Publisher · View at Google Scholar
  • Anna Castellano, Pilade Foti, Aguinaldo Fraddosio, Salvatore Marzano, and Mario Daniele Piccioni, “Mechanical characterization of CFRP composites by ultrasonic immersion tests: experimental and numerical approaches,” Composites Part B: Engineering, 2014. View at Publisher · View at Google Scholar
  • Shaoyan Hua, Mingyue Ding, and Yc Ming Yuchi, “Sparse-View Ultrasound Diffraction Tomography Using Compressed Sensing with Nonuniform FFT,” Computational and Mathematical Methods in Medicine, 2014. View at Publisher · View at Google Scholar
  • Jakub Kopal, Oldřich Vyšata, Jan Burian, Martin Schätz, Aleš Procházka, and Martin Vališ, “Complex continuous wavelet coherence for EEG microstates detection in insight and calm meditation,” Consciousness and Cognition, vol. 30, pp. 13–23, 2014. View at Publisher · View at Google Scholar
  • Mervan Pašić, “Parametrically Excited Oscillations of Second-Order Functional Differential Equations and Application to Duffing Equations with Time Delay Feedback,” Discrete Dynamics in Nature and Society, vol. 2014, pp. 1–17, 2014. View at Publisher · View at Google Scholar
  • Ankurjyoti Saikia, and Utpal Kumar Das, “Analysis and design of open trench barriers in screening steady-state surface vibrations,” Earthquake Engineering and Engineering Vibration, vol. 13, no. 3, pp. 545–554, 2014. View at Publisher · View at Google Scholar
  • Amir M. Rahmani, and Elizabeth K. Ervin, “Parameter studies on impact in a lap joint,” Frontiers of Mechanical Engineering, 2014. View at Publisher · View at Google Scholar
  • Andrew J. Kolarik, Silvia Cirstea, Shahina Pardhan, and Brian C.J. Moore, “A summary of research investigating echolocation abilities of blind and sighted humans,” Hearing Research, 2014. View at Publisher · View at Google Scholar
  • Nasim Moallemi, and Shahram Shahbazpanahi, “A Distributed Reflector Localization Approach to Ultrasonic Array Imaging in Non-Destructive Testing Applications,” Ieee Transactions on Signal Processing, vol. 62, no. 15, pp. 3863–3873, 2014. View at Publisher · View at Google Scholar
  • Tanya Chernyakova, and Yonina C. Eldar, “Fourier-Domain Beamforming: The Path to Compressed Ultrasound Imaging,” Ieee Transactions on Ultrasonics Ferroelectrics and Frequency Control, vol. 61, no. 8, pp. 1252–1267, 2014. View at Publisher · View at Google Scholar
  • Fabrizio Stefani, “Design and fast verification of pocket elliptical journal bearings,” Industrial Lubrication and Tribology, vol. 66, no. 3, pp. 393–401, 2014. View at Publisher · View at Google Scholar
  • Morteza Esmaeili, Jabbar Ali Zakeri, and Seyed Ali Mosayebi, “Investigating the Optimized Open V-Shaped Trench Performance in Reduction of Train-Induced Ground Vibrations,” International Journal of Geomechanics, vol. 14, no. 3, 2014. View at Publisher · View at Google Scholar
  • Rafal Rusinek, Andrzej Weremczuk, Krzysztof Kecik, and Jerzy Warminski, “Dynamics of a time delayed Duffing oscillator,” International Journal of Non-Linear Mechanics, 2014. View at Publisher · View at Google Scholar
  • Ping Li, Shiqiao Gao, Huatong Cai, and Huamin Wang, “Coupling effect analysis for hybrid piezoelectric and electromagnetic energy harvesting from random vibrations,” International Journal of Precision Engineering and Manufacturing, vol. 15, no. 9, pp. 1915–1924, 2014. View at Publisher · View at Google Scholar
  • Adit Decharat, Sanat Wagle, and Frank Melandsø, “Effect of polymer electrode thickness on the acoustical properties of all-screen printed piezoelectric PVDF copolymer transducers,” Japanese Journal of Applied Physics, vol. 53, no. 5S3, pp. 05HB16, 2014. View at Publisher · View at Google Scholar
  • Joachim Strittmatter, Victor Clipa, Viorel Gheorghita, and Paul Guempel, “Characterization of NiTi Shape Memory Damping Elements designed for Automotive Safety Systems,” Journal of Materials Engineering and Performance, vol. 23, no. 7, pp. 2696–2703, 2014. View at Publisher · View at Google Scholar
  • James T. Allison, Tinghao Guo, and Zhi Han, “Co-Design of an Active Suspension Using Simultaneous Dynamic Optimization,” Journal of Mechanical Design, vol. 136, no. 8, 2014. View at Publisher · View at Google Scholar
  • Darun Barazanchy, Marcias Martinez, Bruno Rocha, and Marko Yanishevsky, “A Hybrid Structural Health Monitoring System for the Detection and Localization of Damage in Composite Structures,” Journal of Sensors, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Ennes Sarradj, and Thomas Geyer, “Symbolic regression modeling of noise generation at porous airfoils,” Journal of Sound and Vibration, 2014. View at Publisher · View at Google Scholar
  • A. C. Mitra, M. V. Patil, and N. Banerjee, “Optimization of Vehicle Suspension Parameters for Ride Comfort Based on RSM,” Journal of The Institution of Engineers (India): Series C, 2014. View at Publisher · View at Google Scholar
  • Rafal Rusinek, Andrzej Mitura, and Jerzy Warminski, “Time delay Duffing’s systems: chaos and chatter control,” Meccanica, 2014. View at Publisher · View at Google Scholar
  • Chen Shen, Jun Xu, Nicholas X. Fang, and Yun Jing, “Anisotropic Complementary Acoustic Metamaterial for Canceling out Aberrating Layers,” Physical Review X, vol. 4, no. 4, 2014. View at Publisher · View at Google Scholar
  • Huaqing Wang, Ruitong Li, Gang Tang, Hongfang Yuan, Qingliang Zhao, and Xi Cao, “A Compound Fault Diagnosis for Rolling Bearings Method Based on Blind Source Separation and Ensemble Empirical Mode Decomposition,” Plos One, vol. 9, no. 10, 2014. View at Publisher · View at Google Scholar
  • Alessandro Corsini, Giovanni Delibra, and Anthony G. Sheard, “The application of sinusoidal blade-leading edges in a fan-design methodology to improve stall resistance,” Proceedings of The Institution of Mechanical Engineers Part A-Journal of Po, vol. 228, no. 3, pp. 255–271, 2014. View at Publisher · View at Google Scholar
  • Lucio Cardillo, Alessandro Corsini, Giovanni Delibra, Franco Rispoli, and Anthony G. Sheard, “A numerical investigation into the aerodynamic effect of pressure pulses on a tunnel ventilation fan,” Proceedings of The Institution of Mechanical Engineers Part A-Journal of Po, vol. 228, no. 3, pp. 285–299, 2014. View at Publisher · View at Google Scholar
  • Alberto Sanchez, Manuel Garcia, Miguel Angel Sebastian, and Ana Maria Camacho, “Application of an Instrumental and Computational Approach for Improving the Vibration Behavior of Structural Panels Using a Lightweight Multilayer Composite,” Sensors, vol. 14, no. 3, pp. 4960–4980, 2014. View at Publisher · View at Google Scholar
  • Sadik K. Gharghan, Rosdiadee Nordin, and Mahamod Ismail, “Energy-Efficient ZigBee-Based Wireless Sensor Network for Track Bicycle Performance Monitoring,” Sensors, vol. 14, no. 8, pp. 15573–15592, 2014. View at Publisher · View at Google Scholar
  • Omar Gaber, and Seyed M. Hashemi, “On the Free Vibration Modeling of Spindle Systems: A Calibrated Dynamic Stiffness Matrix,” Shock and Vibration, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Muhammad Saeed Aslam, and Muhammad Asif Zahoor Raja, “A new adaptive strategy to improve online secondary path modeling in active noise control systems using fractional signal processing approach,” Signal Processing, 2014. View at Publisher · View at Google Scholar
  • Hyung-Tae Kim, Cheol-Ho Kim, Seung-Bok Choi, Seok-Jun Moon, and Won-Gil Song, “A novel triple-actuating mechanism of an active air mount for vibration control of precision manufacturing machines: experimental work,” Smart Materials and Structures, vol. 23, no. 7, pp. 077003, 2014. View at Publisher · View at Google Scholar
  • J. Mahil, and T. Sree Renga Raja, “An intelligent biological inspired evolutionary algorithm for the suppression of incubator interference in premature infants ECG,” Soft Computing, vol. 18, no. 3, pp. 571–578, 2014. View at Publisher · View at Google Scholar
  • Arnau Clot, Jordi Romeu, Robert Arcos, and Sara R. Martín, “A power flow analysis of a double-deck circular tunnel embedded in a full-space,” Soil Dynamics and Earthquake Engineering, vol. 57, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Ankurjyoti Saikia, “Numerical study on screening of surface waves using a pair of softer backfilled trenches,” Soil Dynamics and Earthquake Engineering, vol. 65, pp. 206–213, 2014. View at Publisher · View at Google Scholar
  • Congying Deng, Guofu Yin, Hui Fang, and Zhaoyuxi Meng, “Dynamic characteristics optimization for a whole vertical machining center based on the configuration of joint stiffness,” The International Journal of Advanced Manufacturing Technology, 2014. View at Publisher · View at Google Scholar
  • Sven M. Ivansson, “Markov-chain Monte Carlo identification of favorable design choices with application to anechoic coatings,” The Journal of the Acoustical Society of America, vol. 135, no. 6, pp. 3338–3351, 2014. View at Publisher · View at Google Scholar
  • Necmettin Kaya, “Shape Optimization of Rubber Bushing Using Differential Evolution Algorithm,” The Scientific World Journal, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Stefanos Theodoropoulos, Dionisis Kandris, Maria Samarakou, and Grigorios Koulouras, “Fuzzy Regulator Design for Wind Turbine Yaw Control,” The Scientific World Journal, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Mohsen Gerami, and Davood Abdollahzadeh, “Vulnerability of steel moment-resisting frames under effects of forward directivity,” The Structural Design of Tall and Special Buildings, vol. 24, no. 2, pp. 97–122, 2014. View at Publisher · View at Google Scholar
  • Leanne F. Conrad, Michele L. Oliver, Robert J. Jack, James P. Dickey, and Tammy R. Eger, “Selecting seats for steel industry mobile machines based on seat effective amplitude transmissibility and comfort,” Work-A Journal of Prevention Assessment & Rehabilitation, vol. 47, no. 1, pp. 123–136, 2014. View at Publisher · View at Google Scholar
  • A. I. Mashoshin, “Optimization of a device for detecting and measuring parameters of amplitude modulation of underwater noise emission of seagoing vessels,” Acoustical Physics, vol. 59, no. 3, pp. 305–311, 2013. View at Publisher · View at Google Scholar
  • Thomas Geyer, Ennes Sarradj, and Christoph Fritzsche, “Silent Owl Flight: Comparative Acoustic Wind Tunnel Measurements on Prepared Wings,” Acta Acustica United With Acustica, vol. 99, no. 1, pp. 139–153, 2013. View at Publisher · View at Google Scholar
  • Seyyed M. Hasheminejad, Ali Ghaheri, and Sajjad Vaezian, “Exact solution for free in-plane vibration analysis of an eccentric elliptical plate,” Acta Mechanica, 2013. View at Publisher · View at Google Scholar
  • Satoru Goto, Yoshinori Takahashi, and Mikio Tohyama, “Structural Vibration Monitoring Using Cumulative Spectral Analysis,” Advances in Acoustics and Vibration, vol. 2013, pp. 1–7, 2013. View at Publisher · View at Google Scholar
  • Satoru Goto, Yoshinori Takahashi, and Mikio Tohyama, “Autocorrelation Analysis in Time and Frequency Domains for Passive Structural Diagnostics,” Advances in Acoustics and Vibration, vol. 2013, pp. 1–8, 2013. View at Publisher · View at Google Scholar
  • A. Putra, Y. Abdullah, H. Efendy, W. M. F. W. Mohamad, and N. L. Salleh, “Biomass from Paddy Waste Fibers as Sustainable Acoustic Material,” Advances in Acoustics and Vibration, vol. 2013, pp. 1–7, 2013. View at Publisher · View at Google Scholar
  • Akira Sanada, and Nobuo Tanaka, “Extension of the frequency range of resonant sound absorbers using two-degree-of-freedom Helmholtz-based resonators with a flexible panel,” Applied Acoustics, vol. 74, no. 4, pp. 509–516, 2013. View at Publisher · View at Google Scholar
  • D. Connolly, A. Giannopoulos, W. Fan, P.K. Woodward, and M.C. Forde, “Optimising low acoustic impedance back-fill material wave barrier dimensions to shield structures from ground borne high speed rail vibrations,” Construction and Building Materials, vol. 44, pp. 557–564, 2013. View at Publisher · View at Google Scholar
  • Stephen D. Simpson, Julius J.B. Piercy, Jeremy King, and Edward A. Codling, “Modelling larval dispersal and behaviour of coral reef fishes,” Ecological Complexity, 2013. View at Publisher · View at Google Scholar
  • Alberto Gonzalez, Maria de Diego, and Gema Pinero, “Convex Combination Filtered-X Algorithms for Active Noise Control Systems,” Ieee Transactions On Audio Speech And Language Processing, vol. 21, no. 1, pp. 154–165, 2013. View at Publisher · View at Google Scholar
  • Julien Richy, Denis Friboulet, Adeline Bernard, and Olivier Bernard, “Blood Velocity Estimation Using Compressive Sensing,” Ieee Transactions on Medical Imaging, vol. 32, no. 11, pp. 1979–1988, 2013. View at Publisher · View at Google Scholar
  • Jun Li, and Dacheng Tao, “Simple Exponential Family PCA,” Ieee Transactions On Neural Networks And Learning Systems, vol. 24, no. 3, pp. 485–497, 2013. View at Publisher · View at Google Scholar
  • Alessandro Perelli, Tommaso Di Ianni, Alessandro Marzani, Luca De Marchi, and Guido Masetti, “Model-Based Compressive Sensing for Damage Localization in Lamb Wave Inspection,” Ieee Transactions on Ultrasonics Ferroelectrics and Frequency Control, vol. 60, no. 10, pp. 2089–2097, 2013. View at Publisher · View at Google Scholar
  • K. Ramesh, T. Alwarsamy, and S. Jayabal, “Investigation of chatter stability in boring tool and tool wear prediction using neural network,” International Journal Of Materials & Product Technology, vol. 46, no. 1, pp. 47–70, 2013. View at Publisher · View at Google Scholar
  • Maria V. Quintana, and Liz G. Nallim, “A general Ritz formulation for the free vibration analysis of thick trapezoidal and triangular laminated plates resting on elastic supports,” International Journal Of Mechanical Sciences, vol. 69, pp. 1–9, 2013. View at Publisher · View at Google Scholar
  • Morteza Esmaeili, Jabbar Ali Zakeri, and Seyed Ali Mosayebi, “Effect of sand-fouled ballast on train-induced vibration,” International Journal of Pavement Engineering, pp. 1–10, 2013. View at Publisher · View at Google Scholar
  • B. Debecker, and A. Vervoort, “Two-dimensional discrete element simulations of the fracture behaviour of slate,” International Journal of Rock Mechanics and Mining Sciences, vol. 61, pp. 161–170, 2013. View at Publisher · View at Google Scholar
  • Stefano Bianchi, Alessandro Corsini, Anthony G. Sheard, and Cecilia Tortora, “A Critical Review of Stall Control Techniques in Industrial Fans,” ISRN Mechanical Engineering, vol. 2013, pp. 1–18, 2013. View at Publisher · View at Google Scholar
  • Hyung-Tae Kim, Cheol-Ho Kim, Sung-Bok Kang, Seok-Jun Moon, and Gyu-Seop Lee, “A Hybrid Structure of Dual Stators and a Pneumatic Spring for Resonance Control in an Air Mount,” Journal of Electromagnetic Analysis and Applications, vol. 05, no. 03, pp. 114–119, 2013. View at Publisher · View at Google Scholar
  • Jeroen De Ridder, Joris Degroote, Katrien Van Tichelen, Paul Schuurmans, and Jan Vierendeels, “Modal characteristics of a flexible cylinder in turbulent axial flow from numerical simulations,” Journal of Fluids and Structures, vol. 43, pp. 110–123, 2013. View at Publisher · View at Google Scholar
  • Vincent Lhuillier, Simon Chesne, Luc Gaudiller, and Charles Pezerat, “Improvement of transmission loss of a double panel by using active control with a virtual modal mass,” Journal of Intelligent Material Systems and Structures, vol. 24, no. 15, pp. 1822–1833, 2013. View at Publisher · View at Google Scholar
  • Jabbar-Ali Zakeri, Morteza Esmaeili, Seyedali Mosayebi, and Rauf Abbasi, “Effects of vibration in desert area caused by moving trains,” Journal of Modern Transportation, vol. 20, no. 1, pp. 16–23, 2013. View at Publisher · View at Google Scholar
  • R. D'Amico, A. Pratellesi, N. Baldanzini, and M. Pierini, “Reformulation of the Stochastic BEM to improve the computational efficiency in the prediction of the vibro-acoustic behaviour of structures with uncertainties,” Journal of Sound and Vibration, vol. 332, no. 9, pp. 2132–2148, 2013. View at Publisher · View at Google Scholar
  • Jie Duan, Mingfeng Li, Teik C. Lim, Ming-Ran Lee, Ming-Te Cheng, Wayne Vanhaaften, and Takeshi Abe, “Virtual Secondary Path Algorithm for Multichannel Active Control of Vehicle Powertrain Noise,” Journal of Vibration and Acoustics-Transactions of The Asme, vol. 135, no. 5, 2013. View at Publisher · View at Google Scholar
  • Ming-Yu Fu, Ji-Peng Ning, Yu-Shi Wei, and Xing-Yan Sun, “Design of virtual actuator with robust adaptive sliding mode,” Kongzhi Lilun Yu Yingyong/Control Theory and Applications, vol. 30, no. 4, pp. 519–525, 2013. View at Publisher · View at Google Scholar
  • Michael Schrapp, Thomas Scharrer, Matthias Goldammer, Stefan J Rupitsch, Alexander Sutor, Helmut Ermert, and Reinhard Lerch, “Artifact reduction in non-destructive testing by means of complementary data fusion of x-ray computed tomography and ultrasonic pulse-echo testing,” Measurement Science and Technology, vol. 24, no. 12, pp. 125403, 2013. View at Publisher · View at Google Scholar
  • Pingping Liao, Maolin Cai, Yan Shi, and Zichuan Fan, “Compressed air leak detection based on time delay estimation using a portable multi-sensor ultrasonic detector,” Measurement Science and Technology, vol. 24, no. 5, pp. 055102, 2013. View at Publisher · View at Google Scholar
  • Peng Li, and Xun Yu, “Active noise cancellation algorithms for impulsive noise,” Mechanical Systems and Signal Processing, vol. 36, no. 2, pp. 630–635, 2013. View at Publisher · View at Google Scholar
  • Anna Reggio, Maurizio De Angelis, and Raimondo Betti, “A state-space methodology to identify modal and physical parameters of non-viscously damped systems,” Mechanical Systems and Signal Processing, vol. 41, no. 1-2, pp. 380–395, 2013. View at Publisher · View at Google Scholar
  • Ping Li, Shiqiao Gao, and Huatong Cai, “Modeling and analysis of hybrid piezoelectric and electromagnetic energy harvesting from random vibrations,” Microsystem Technologies, 2013. View at Publisher · View at Google Scholar
  • K. M. Masri, M. I. Younis, and S. Shao, “The effect of time-delayed feedback controller on an electrically actuated resonator,” Nonlinear Dynamics, vol. 74, no. 1-2, pp. 257–270, 2013. View at Publisher · View at Google Scholar
  • Tomoaki Nishikubo, and Yasuhide Kobayashi, “Effects of a Delay-Type Directional Actuator on Feedforward Disturbance Attenuation Control System of Flexible Beam,” TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, vol. 79, no. 807, pp. 4108–4120, 2013. View at Publisher · View at Google Scholar
  • Hervé Liebgott, Rémy Prost, and Denis Friboulet, “Pre-beamformed RF signal reconstruction in medical ultrasound using compressive sensing,” Ultrasonics, vol. 53, no. 2, pp. 525–533, 2013. View at Publisher · View at Google Scholar
  • Ennes Sarradj, “Three-Dimensional Acoustic Source Mapping with Different Beamforming Steering Vector Formulations,” Advances in Acoustics and Vibration, vol. 2012, pp. 1–12, 2012. View at Publisher · View at Google Scholar