About this Journal Submit a Manuscript Table of Contents
Applied Computational Intelligence and Soft Computing
Volume 2011 (2011), Article ID 183764, 18 pages
http://dx.doi.org/10.1155/2011/183764
Research Article

Prediction of Surface Roughness in End Milling Process Using Intelligent Systems: A Comparative Study

Department of Mechanical Engineering, Faculty of Engineering, Assiut University, Assiut 71516, Egypt

Received 5 May 2011; Revised 30 June 2011; Accepted 16 August 2011

Academic Editor: Serafín Moral

Copyright © 2011 Abdel Badie Sharkawy. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Abdel Badie Sharkawy, “Prediction of Surface Roughness in End Milling Process Using Intelligent Systems: A Comparative Study,” Applied Computational Intelligence and Soft Computing, vol. 2011, Article ID 183764, 18 pages, 2011. doi:10.1155/2011/183764