Journal of Applied Mathematics and Decision Sciences
Volume 2009 (2009), Article ID 716059, 27 pages
doi:10.1155/2009/716059
Research Article

Analysis and Optimization of a Combined Make-to-Stock and Make-to-Order Multiproduct Manufacturing System

Khaled Hadj Youssef,1 Christian van Delft,2 and Yves Dallery3

1Laboratoire Génie Mécanique, École Nationale des Ingénieurs de Monastir, Avenue Ibn El Jazzar, 5019 Monastir, Tunisia
2HEC School of Management, Paris (GREGHEC) 1, rue de la Libération, 78351 Jouy-en-Josas Cedex, France
3Laboratoire Génie Industriel, Ecole Centrale Paris, Grande Voie des Vignes, 92295 Chatenay-Malabry Cedex, France

Received 12 February 2009; Revised 14 August 2009; Accepted 4 September 2009

Academic Editor: Ömer S. Benli

Copyright © 2009 Khaled Hadj Youssef et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Khaled Hadj Youssef, Christian van Delft, and Yves Dallery, “Analysis and Optimization of a Combined Make-to-Stock and Make-to-Order Multiproduct Manufacturing System,” Journal of Applied Mathematics and Decision Sciences, vol. 2009, Article ID 716059, 27 pages, 2009. doi:10.1155/2009/716059