Table of Contents for Year 2012 [61 articles]

• Fatigue Reliability Assessment of Steel Member Using Probabilistic Stress-Life Method, Dae-Hung Kang, Changhwan Jang, Yeon-Soo Park, Suk-Yeol Han, and Jin Ho Kim
  Volume 2012 (2012), Article ID 649215, 10 pages
• Studies of Moisture Absorption and Release Behaviour of Akund Fiber, Xue Yang, Liqian Huang, Longdi Cheng, and Jianyong Yu
  Volume 2012 (2012), Article ID 356548, 4 pages
• Boundary Layer Flow and Heat Transfer past a Permeable Shrinking Sheet in a Nanofluid with Radiation Effect, Khairy Zaimi, Anuar Ishak, and Ioan Pop
  Volume 2012 (2012), Article ID 340354, 7 pages
• Numerical Study on the Effect of Wax Deposition on the Restart Process of a Waxy Crude Oil Pipeline, Qing Miao
  Volume 2012 (2012), Article ID 973652, 10 pages
• Vertical Vibration Model for Unsteady Lubrication in Rolls-Strip Interface of Cold Rolling Mills, Xu Yang, Qing Li, Chao-nan Tong, and Qi-han Liu
  Volume 2012 (2012), Article ID 734510, 7 pages
• Experimental Visualization of the Flow Structure for Jet in Crossflow with a Curved Hole Passage, Jun Yu Liang and Shun Kang
  Volume 2012 (2012), Article ID 950452, 12 pages
• Mechanical, Thermal Degradation, and Flammability Studies on Surface Modified Sisal Fiber Reinforced Recycled Polypropylene Composites, Arun Kumar Gupta, Manoranjan Biswal, S. Mohanty, and S. K. Nayak
  Volume 2012 (2012), Article ID 418031, 13 pages
• Numerical Model on Frost Height of Round Plate Fin Used for Outdoor Heat Exchanger of Mobile Electric Heat Pumps, Moo-Yeon Lee
  Volume 2012 (2012), Article ID 863731, 7 pages
• Using Neural Network for Determination of Viscosity in Water-TiO₂ Nanofluid, Mehdi Bahiraei, Seyed Mostafa Hosseinalipour, Kaveh Zabihi, and Ehsan Taheran
  Volume 2012 (2012), Article ID 742680, 10 pages
• Experimental Study of the Cooling of Electrical Components Using Water Film Evaporation, S. Harmand, D. Pérez Gil, S. Zouitene, L. Remmerie, T. Benazzouz, and F. Cardarelli
  Volume 2012 (2012), Article ID 183853, 12 pages
• Experimental Study on Chaotic Mixing Created by a New Type of Mixer with Rotational Blades, Payam Rahim Mashaei, Seyed Mostafa Hosseinalipour, Norouz Mohammad Nouri, and Mohammad el Jawad Muslmani
  Volume 2012 (2012), Article ID 543253, 7 pages
• Comparative Modal Analysis of Gasketed and Nongasketed Bolted Flanged Pipe Joints: FEA Approach, Muhammad Abid, Shahid Maqsood, and Hafiz Abdul Wajid
  Volume 2012 (2012), Article ID 413583, 8 pages
• Experimental Validation of Volume of Fluid Method for a Sluice Gate Flow, A. A. Oner, M. S. Akoz, M. S. Kirkgoz, and V. Gumus
  Volume 2012 (2012), Article ID 461708, 10 pages
• Investigation into the Impact of n-Decane, Decalin, and Isoparaffinic Solvent on Elastomeric Sealing Materials, Yue Liu and Christopher W. Wilson
  Volume 2012 (2012), Article ID 127430, 13 pages
• Effect of Red Mud and Copper Slag Particles on Physical and Mechanical Properties of Bamboo-Fiber-Reinforced Epoxy Composites, Sandhyarani Biswas, Amar Patnaik, and Ritesh Kaundal
  Volume 2012 (2012), Article ID 141248, 6 pages
• Condensation Dripping Water Detection and Its Control Method from Exhaust Pipe of Gasohol Vehicle under Low Environmental Temperature Conditions: A Case Study in Harbin, China, Guangdong Tian, Tiangang Qiang, Jiangwei Chu, and Guangming Qiao
  Volume 2012 (2012), Article ID 627131, 5 pages
• FSI Simulation of Common Carotid under Normal and High Blood Pressures, S. M. Abdul Khader, Anurag Ayachit, B. Raghuvir Pai, V. R. K. Rao, and S. Ganesh Kamath
  Volume 2012 (2012), Article ID 140579, 6 pages
• Power Balancing of Inline Multicylinder Diesel Engine, S. H. Gawande, L. G. Navale, and M. R. Nandgaonkar
  Volume 2012 (2012), Article ID 937917, 9 pages
• Influence of Process Parameters on Microhardness of Electroless Ni-B Coatings, Suman Kalyan Das and Prasanta Sahoo
  Volume 2012 (2012), Article ID 703168, 11 pages
• Life Assessment and Life Extension of an Aircraft Wheel, M. Aghaie-Khafri, M. Amin, and A. H. Momeni
  Volume 2012 (2012), Article ID 326971, 6 pages
• Mechanical Properties of Natural Jute Fabric/Jute Mat Fiber Reinforced Polymer Matrix Hybrid Composites, Elsayed A. Elbadry, Mohamed S. Aly-Hassan, and Hiroyuki Hamada
  Volume 2012 (2012), Article ID 354547, 12 pages
• Modeling and Computation of Heat Transfer through Permeable Hollow-Pin Systems, A.-R. A. Khaled
  Volume 2012 (2012), Article ID 587165, 12 pages
• Fault Severity Estimation of Rotating Machinery Based on Residual Signals, Fan Jiang, Wei Li, Zhongqiu Wang, and Zhencai Zhu
  Volume 2012 (2012), Article ID 518468, 8 pages
• Performance Evaluation of /Water Nanofluid as Coolant in a Double-Tube Heat Exchanger Flowing under a Turbulent Flow Regime, Navid Bozorgan, Mostafa Mafi, and Nariman Bozorgan
  Volume 2012 (2012), Article ID 891382, 8 pages
• Slip Flow in Elliptic Microducts with Constant Heat Flux, Marco Spiga and Pamela Vocale
  Volume 2012 (2012), Article ID 481280, 8 pages
• Fuzzy-Based Evaluation of a Specific Drive Train, Attila Piros and Zsolt Farkas
  Volume 2012 (2012), Article ID 763171, 7 pages
• A Mathematical Model for the Analysis of Elastic Field in a Stiffened Cantilever of Laminated Composite, N. M. L. Huq and A. M. Afsar
  Volume 2012 (2012), Article ID 170704, 12 pages
• Mechanical Properties of Ti-6Al-4V Octahedral Porous Material Unit Formed by Selective Laser Melting, Jianfeng Sun, Yongqiang Yang, and Di Wang
  Volume 2012 (2012), Article ID 427386, 11 pages
• Development of a Wheelchair with a Lifting Function, Yoshikazu Mori, Norikatsu Sakai, and Kaoru Katsumura
  Volume 2012 (2012), Article ID 803014, 9 pages
• CFD Simulation of Flow in an Abrasive Water Suspension Jet: The Effect of Inlet Operating Pressure and Volume Fraction on Skin Friction and Exit Kinetic Energy, D. Deepak, D. Anjaiah, K. Vasudeva Karanth, and N. Yagnesh Sharma
  Volume 2012 (2012), Article ID 186430, 8 pages
• Modeling of Tooling-Workpiece Interactions on Random Surfaces, Hitesh Kataria, Andres L. Carrano, and Brian K. Thorn
  Volume 2012 (2012), Article ID 807018, 8 pages
• Pure Nano-Rotation Scanner, Moo-Yeon Lee, Eun-Joo Park, Jeong-Kuk Yeom, Dong-Pyo Hong, and Dong-Yeon Lee
  Volume 2012 (2012), Article ID 962439, 11 pages
• MHD Free Convection and Mass Transfer Flow from a Vertical Plate in the Presence of Hall and Ion-Slip Current, Koushik Dash, Mahmud Alam, and Mohammad Wahiduzzaman
  Volume 2012 (2012), Article ID 851957, 20 pages
• Projectile Nose Mass Abrasion of High-Speed Penetration into Concrete, Haijun Wu, Fei Qian, Fenglei Huang, and Yinan Wang
  Volume 2012 (2012), Article ID 296503, 9 pages
• Modelling and Prediction of Stainless Steel Clad Bead Geometry Deposited by GMAW Using Regression and Artificial Neural Network Models, P. Sreeraj and T. Kannan
  Volume 2012 (2012), Article ID 237379, 12 pages
• Numerical Simulation and Analysis of Gas-Liquid Flow in a T-Junction Microchannel, Hongtruong Pham, Lu Wen, and Hongbo Zhang
  Volume 2012 (2012), Article ID 231675, 8 pages
• The Critical Height of a Liquid Being Drained from the Tank with Bell-Mouth Drain Port, J. Mohammadi, H. Karimi, M. Islami, and M. H. Hamedi
  Volume 2012 (2012), Article ID 347389, 5 pages
• Experimental Investigation on Power Output in Aged Wind Turbines, N. Murugan, M. Umamaheswari, SI. Vimal, and P. Sivashanmugam
  Volume 2012 (2012), Article ID 380986, 7 pages
• Utilization of Bio-Oil for Cooking and Lighting, P. K. Halder, M. U. H. Joardder, M. R. A. Beg, N. Paul, and I. Ullah
  Volume 2012 (2012), Article ID 190518, 5 pages
• Numerical Analysis of Oscillation Death in Coupled Self-Excited Elastic Beams, Miguel A. Barron, Isaias Hilerio, and Gabriel Plascencia
  Volume 2012 (2012), Article ID 746537, 7 pages
• Numerical Analysis of Mixed Convection through an Internally Finned Tube, Sachindra Kumar Rout, Dipti Prasad Mishra, Dhirendra Nath Thatoi, and Asit Ku. Acharya
  Volume 2012 (2012), Article ID 918342, 10 pages
• Design, Fabrication, and Testing of a SOI-MEMS-Based Active Microprobe for Potential Cellular Force Sensing Applications, Li Zhang and Jingyan Dong
  Volume 2012 (2012), Article ID 785798, 9 pages
• Computational Fluid Dynamics Modeling to Improve Natural Flow Rate and Sweet Pepper Productivity in Greenhouse, W. Limtrakarn, P. Boonmongkol, A. Chompupoung, K. Rungprateepthaworn, J. Kruenate, and P. Dechaumphai
  Volume 2012 (2012), Article ID 158563, 7 pages
• Temperature Estimation in the Combustion Chamber of an Internal Combustion Engine, Gholam Reza Safakish
  Volume 2012 (2012), Article ID 931584, 6 pages
• Choosing Actuation Scheme for Optimal Performance of 3-DOF Planar Parallel Manipulators, S. Ramana Babu, V. Ramachandra Raju, and K. Ramji
  Volume 2012 (2012), Article ID 171682, 10 pages
• Hydromagnetic Natural Convection Flow in a Fluid-Saturated Porous Medium with Nonuniform Heat Generation, Habibis Saleh and Ishak Hashim
  Volume 2012 (2012), Article ID 267170, 13 pages
• Review of Techniques for Fault Diagnosis in Damaged Structure and Engineering System, Dhirendra Nath Thatoi, Harish Ch. Das, and Dayal R. Parhi
  Volume 2012 (2012), Article ID 327569, 11 pages
• Heat Transfer in Nanofluids 2012, Yogesh Jaluria, Oronzio Manca, Dimos Poulikakos, Kambiz Vafai, and Liqiu Wang
  Volume 2012 (2012), Article ID 972973, 2 pages
• A Heuristic Scheduling Algorithm for Minimizing Makespan and Idle Time in a Nagare Cell, M. Muthukumaran and S. Muthu
  Volume 2012 (2012), Article ID 895463, 13 pages
• Molecular Dynamics Simulations of Pressure-Driven Flows and Comparison with Acceleration-Driven Flows, Quy Dong To, Thanh Tung Pham, Guy Lauriat, and Céline Léonard
  Volume 2012 (2012), Article ID 580763, 10 pages
• Graph-Theoretic Approach for the Dynamic Simulation of Flexible Multibody Systems, M. J. Richard and M. Bouazara
  Volume 2012 (2012), Article ID 530132, 12 pages
• Measurement and Model Validation of Nanofluid Specific Heat Capacity with Differential Scanning Calorimetry, Harry O'Hanley, Jacopo Buongiorno, Thomas McKrell, and Lin-wen Hu
  Volume 2012 (2012), Article ID 181079, 6 pages
• Modeling and Calibration for Crack Detection in Circular Shafts Supported on Bearings Using Lateral and Torsional Vibration Measurements, A. Tlaisi, A. S. J. Swamidas, M. R. Haddara, and A. Akinturk
  Volume 2012 (2012), Article ID 519471, 18 pages
• Experimental Study of the Freezing Point of γ-Al₂O₃/Water Nanofluid, Thierry Maré, Ousmane Sow, Salma Halelfadl, Sylvain Lebourlout, and Cong Tam Nguyen
  Volume 2012 (2012), Article ID 162961, 7 pages
• Experimental Investigation of the Energy Needs for a Conventionally and an Infrared-Heated Greenhouse, A. Kavga, G. Alexopoulos, V. Bontozoglou, S. Pantelakis, and Th. Panidis
  Volume 2012 (2012), Article ID 789515, 16 pages
• The Utilization of Waste Date Seed as Bio-Oil and Activated Carbon by Pyrolysis Process, Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin, and Mohammad Nurul Islam
  Volume 2012 (2012), Article ID 316806, 6 pages
• Numerical Investigation on Mixed Convection in Triangular Cross-Section Ducts with Nanofluids, Oronzio Manca, Sergio Nardini, Daniele Ricci, and Salvatore Tamburrino
  Volume 2012 (2012), Article ID 139370, 13 pages
• Water-Based Nanofluid Characterization: Thermal Conductivity and Viscosity Measurements and Correlation, L. Colla, L. Fedele, M. Scattolini, and S. Bobbo
  Volume 2012 (2012), Article ID 674947, 8 pages
• Numerical Study of Laminar Confined Impinging Slot Jets with Nanofluids, Giuseppe Di Lorenzo, Oronzio Manca, Sergio Nardini, and Daniele Ricci
  Volume 2012 (2012), Article ID 248795, 15 pages
• Remarks on Constitutive Modeling of Nanofluids, Mehrdad Massoudi and Tran X. Phuoc
  Volume 2012 (2012), Article ID 927580, 6 pages
• Natural Convection of Nanofluids in a Square Enclosure with a Protruding Heater, J. Guiet, M. Reggio, and P. Vasseur
  Volume 2012 (2012), Article ID 167296, 11 pages