- About this Journal ·
- Abstracting and Indexing ·
- Aims and Scope ·
- Annual Issues ·
- Article Processing Charges ·
- Author Guidelines ·
- Bibliographic Information ·
- Citations to this Journal ·
- Contact Information ·
- Editorial Board ·
- Editorial Workflow ·
- Free eTOC Alerts ·
- Publication Ethics ·
- Recently Accepted Articles ·
- Reviewers Acknowledgment ·
- Submit a Manuscript ·
- Subscription Information ·
- Table of Contents
Advances in Mechanical Engineering
Volume 2012 (2012), Article ID 140579, 6 pages
FSI Simulation of Common Carotid under Normal and High Blood Pressures
1Department of Mechanical Engineering, MIT, Manipal 576104, India
2Department of Radiodiagnosis & Imaging, KMC, Manipal 576104, India
3Department of Cardiovascular & Thoracic Surgery, KMC, Manipal 576104, India
Received 30 April 2012; Accepted 14 October 2012
Academic Editor: Hakan F. Oztop
Copyright © 2012 S. M. Abdul Khader et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
- M. Bathe and R. D. Kamm, “A fluid-structure interaction finite element analysis of pulsatile blood flow through a compliant stenotic artery,” Journal of Biomechanical Engineering, vol. 121, no. 4, pp. 361–369, 1999.
- Q. Long, X. Y. Xu, K. V. Ramnarine, and P. Hoskins, “Numerical investigation of physiologically realistic pulsatile flow through arterial stenosis,” Journal of Biomechanics, vol. 34, no. 10, pp. 1229–1242, 2001.
- K. Perktold and G. Rappitsch, “Computer simulation of local blood flow and vessel mechanics in a compliant carotid artery bifurcation model,” Journal of Biomechanics, vol. 28, no. 7, pp. 845–856, 1995.
- D. Tang, C. Yang, S. Kobayashi, J. Zheng, and R. P. Vito, “Effect of stenosis asymmetry on blood flow and artery compression: a three-dimensional fluid-structure interaction model,” Annals of Biomedical Engineering, vol. 31, no. 10, pp. 1182–1193, 2003.
- D. Tang, C. Yang, Y. Huang, and D. N. Ku, “Wall stress and strain analysis using a three-dimensional thick-wall model with fluid-structure interactions for blood flow in carotid arteries with stenoses,” Computers and Structures, vol. 72, no. 1, pp. 341–356, 1999.
- R. Torii, M. Oshima, T. Kobayashi, K. Takagi, and T. E. Tezduyar, “Fluid-structure interaction modeling of aneurysmal conditions with high and normal blood pressures,” Computational Mechanics, vol. 38, no. 4-5, pp. 482–490, 2006.
- J. Ferziger and M. Peric, Computational Methods for Fluid Dynamics, Springer, Berlin, Germany, 2002.
- Y. Fung, Biodynamics-Circulation, Springer, New York, NY, USA, 1984.
- ANSYS Release 11.0 Documentation, ANSYS Company, Pittsburgh, Pa, USA, 2008.
- Z. Li and C. Kleinstreuer, “Fluid-structure interaction effects on sac-blood pressure and wall stress in a stented aneurysm,” Journal of Biomechanical Engineering, vol. 127, no. 4, pp. 662–671, 2005.
- C. A. Figueroa, I. E. Vignon-Clementel, K. E. Jansen, T. J. R. Hughes, and C. A. Taylor, “A coupled momentum method for modeling blood flow in three-dimensional deformable arteries,” Computer Methods in Applied Mechanics and Engineering, vol. 195, no. 41–43, pp. 5685–5706, 2006.
- R. G. Gosling and M. M. Budge, “Terminology for describing the elastic behavior of arteries,” Hypertension, vol. 41, no. 6, pp. 1180–1182, 2003.
- W. A. Riley, R. W. Barnes, G. W. Evans, and G. L. Burke, “Ultrasonic measurement of the elastic modulus of the common carotid artery: the atherosclerosis risk in communities (ARIC) study,” Stroke, vol. 23, no. 7, pp. 952–956, 1992.
- S. Ahmed, I. D. Sutalo, and H. Kavnoudias, “Fluid-structure interaction modelling of a patient specific cerebral aneurysm: effect of hypertension and modulus of elasticity,” in Proceedings of the 16th Australian Fluid Mechanics Conference, Crown Plaza, Gold Cost, Australia, 2007.