About this Journal Submit a Manuscript Table of Contents
Advances in Mechanical Engineering
Volume 2012 (2012), Article ID 427386, 11 pages
http://dx.doi.org/10.1155/2012/427386
Research Article

Mechanical Properties of Ti-6Al-4V Octahedral Porous Material Unit Formed by Selective Laser Melting

School of Mechanical and Automobile Engineering, South China University of Technology, Guangzhou 510640, China

Received 2 June 2012; Revised 28 August 2012; Accepted 28 August 2012

Academic Editor: Yung C. Shin

Copyright © 2012 Jianfeng Sun et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Jianfeng Sun, Yongqiang Yang, and Di Wang, “Mechanical Properties of Ti-6Al-4V Octahedral Porous Material Unit Formed by Selective Laser Melting,” Advances in Mechanical Engineering, vol. 2012, Article ID 427386, 11 pages, 2012. doi:10.1155/2012/427386