Table of Contents for Year 2013 [72 articles]

• A Diversity-Enhanced Constrained Particle Swarm Optimizer for Mixed Integer-Discrete-Continuous Engineering Design Problems, Semin Chun, Young-Tark Kim, and Tae-Hyoung Kim
  Volume 2013 (2013), Article ID 130750, 11 pages
• Temperature Dependence of Ascending Bubble-Driven Flow Patterns Found in Champagne Glasses as Determined through Numerical Modeling, Fabien Beaumont, Catalin Popa, Gérard Liger-Belair, and Guillaume Polidori
  Volume 2013 (2013), Article ID 156430, 10 pages
• Large-Eddy Simulation of Particle-Laden Turbulent Flows over a Backward-Facing Step Considering Two-Phase Two-Way Coupling, Wang Bing, Zhang Hui Qiang, and Wang Xi Lin
  Volume 2013 (2013), Article ID 325101, 11 pages
• Ultrasonic Motor Using Bending Modes with Single Foot, Xiaohui Yang, Qiang Zhang, and Xiangyu Zhou
  Volume 2013 (2013), Article ID 747583, 6 pages
• DNS Study of the Turbulent Taylor-Vortex Flow on a Ribbed Inner Cylinder, Takahiro Tsukahara, Manabu Ishikawa, and Yasuo Kawaguchi
  Volume 2013 (2013), Article ID 628490, 12 pages
• A Rough Set Approach of Mechanical Fault Diagnosis for Five-Plunger Pump, Jiangping Wang
  Volume 2013 (2013), Article ID 174987, 11 pages
• Mathematical Modeling of the High Temperature Treatment of Birch in a Prototype Furnace, Duygu Kocaefe, Yasar Kocaefe, Ramdane Younsi, Noura Oumarou, and S. Thierry Lekounougou
  Volume 2013 (2013), Article ID 194610, 8 pages
• Modeling of the Cutting Forces in Turning Process Using Various Methods of Cooling and Lubricating: An Artificial Intelligence Approach, Djordje Cica, Branislav Sredanovic, Gordana Lakic-Globocki, and Davorin Kramar
  Volume 2013 (2013), Article ID 798597, 8 pages
• Overview of Ionic Liquids Used as Working Fluids in Absorption Cycles, Mehrdad Khamooshi, Kiyan Parham, and Ugur Atikol
  Volume 2013 (2013), Article ID 620592, 7 pages
• Total Energy Growth Rate of Rolling Bearing due to Faults during Run-Up, Zhongqiu Wang, Zhencai Zhu, Wei Li, Guoan Chen, and Gongbo Zhou
  Volume 2013 (2013), Article ID 502051, 7 pages
• Numerical Study of Thermal Behavior in Alternating Current Light-Emitting Diodes, Farn-Shiun Hwu and Hung-Lin Hsieh
  Volume 2013 (2013), Article ID 426767, 5 pages
• Numerical Analysis of Flow around a Moving Object by an Immersed Boundary Method with the Level Set Method, Atsuki Iijima, Tomomitsu Sato, and Toshio Tagawa
  Volume 2013 (2013), Article ID 868240, 9 pages
• Large Eddy Simulation of Inertial Particle Preferential Dispersion in a Turbulent Flow over a Backward-Facing Step, Bing Wang, Huiqiang Zhang, and Xilin Wang
  Volume 2013 (2013), Article ID 493212, 8 pages
• Analysis of Dual Heat Sources in a Partially Open Enclosure, M. McGarry and James G. Kohl
  Volume 2013 (2013), Article ID 126353, 8 pages
• Numerical Simulation of Mixed Convection in a Rotating Cylindrical Cavity: Influence of Prandtl Number, Gustavo Urquiza, Laura Castro, Juan García, Miguel Basurto, and Enoc Bogarin
  Volume 2013 (2013), Article ID 950765, 8 pages
• Modeling and Analysing of Air Filter in Air Intake System in Automobile Engine, R. Manikantan and E. James Gunasekaran
  Volume 2013 (2013), Article ID 654396, 6 pages
• Injection Moulded Biocomposites from Oat Hull and Polypropylene/Polylactide Blend: Fabrication and Performance Evaluation, Jeevan Prasad Reddy, Manjusri Misra, and Amar Mohanty
  Volume 2013 (2013), Article ID 761840, 8 pages
• An Analytical Approximation for Continuous Flow Microwave Heating of Liquids, G. Cuccurullo, L. Giordano, and G. Viccione
  Volume 2013 (2013), Article ID 929236, 8 pages
• Analysis of Dry Sliding Wear Behaviour of Aluminium-Fly Ash Composites: The Taguchi Approach, Shanmughasundaram Palanisamy, Subramanian Ramanathan, and Ravikumar Rangaraj
  Volume 2013 (2013), Article ID 658085, 10 pages
• Pressure Change in Tee Branch Pipe in Oscillatory Flow, Daisuke Sakamoto, Chongho Youn, and Toshiharu Kagawa
  Volume 2013 (2013), Article ID 257283, 11 pages
• Performance Evaluation of a Bench-Top Precision Glass Molding Machine, Peter Wachtel, Peiman Mosaddegh, Benn Gleason, J. David Musgraves, and Kathleen Richardson
  Volume 2013 (2013), Article ID 178680, 12 pages
• Modeling and Numerical Simulation of the Grinding Temperature Field with Nanoparticle Jet of MQL, C. H. Li, J. Y. Li, S. Wang, and Q. Zhang
  Volume 2013 (2013), Article ID 986984, 9 pages
• Improved Complexity Based on Time-Frequency Analysis in Bearing Quantitative Diagnosis, Jing Wang, Lingli Cui, Huaqing Wang, and Peng Chen
  Volume 2013 (2013), Article ID 258506, 11 pages
• Simulation and Experimental Investigation of Thermal Performance of a Miniature Flat Plate Heat Pipe, R. Boukhanouf and A. Haddad
  Volume 2013 (2013), Article ID 474935, 8 pages
• Numerical Determination of Effects of Wall Temperatures on Nusselt Number and Convective Heat Transfer Coefficient in Real-Size Rooms, Ozgen Acikgoz and Olcay Kincay
  Volume 2013 (2013), Article ID 287963, 9 pages
• Numerical Simulation on the Food Package Temperature in Refrigerated Display Cabinet Influenced by Indoor Environment, Chang Zhijuan, Wu Xuehong, Lu Yanli, Ma Qiuyang, and Zhang Wenhui
  Volume 2013 (2013), Article ID 708785, 7 pages
• Theoretical Analysis of the Effect of a Bottom Reflector on a Vertical Multiple-Effect Diffusion Solar Still Coupled with a Basin-Type Still, Hiroshi Tanaka
  Volume 2013 (2013), Article ID 107193, 11 pages
• Laminar Mixed Convection in the Entrance Region of Horizontal and Inclined Semicircular Ducts, Yousef M. F. El Hasadi
  Volume 2013 (2013), Article ID 476537, 11 pages
• Detection of Early Faults in Rotating Machinery Based on Wavelet Analysis, Meng Hee Lim and M. S. Leong
  Volume 2013 (2013), Article ID 625863, 8 pages
• Numerical Simulation of Gas-Liquid-Solid Three-Phase Flow in Deep Wells, Jianyu Xie, Bo Yu, Xinyu Zhang, Qianqian Shao, and Xianzhi Song
  Volume 2013 (2013), Article ID 951298, 10 pages
• Error Analysis of 3D Metal Micromold Fabricated by Femtosecond Laser Cutting and Microelectric Resistance Slip Welding, Bin Xu, Xiao-Yu Wu, Jian-Guo Lei, Feng Luo, Feng Gong, Chen-Lin Du, Xiu-Quan Sun, and Shuang-Chen Ruan
  Volume 2013 (2013), Article ID 464769, 8 pages
• Comparisons of LES and RANS Computations with PIV Experiments on a Cylindrical Cavity Flow, Wen-Tao Su, Xiao-Bin Li, Feng-Chen Li, Xian-Zhu Wei, Zhi-Ying Zheng, and Xin Zhang
  Volume 2013 (2013), Article ID 592940, 10 pages
• Aerodynamic Performance Prediction of Straight-Bladed Vertical Axis Wind Turbine Based on CFD, L. X. Zhang, Y. B. Liang, X. H. Liu, Q. F. Jiao, and J. Guo
  Volume 2013 (2013), Article ID 905379, 11 pages
• Numerical Simulation of the Transient Process of Power Failure in a Mixed Pump, Xudan Ma, Jintao Liu, and Leqin Wang
  Volume 2013 (2013), Article ID 743201, 10 pages
• Effect of Viscoelasticity on the Natural Frequencies of Axially Moving Continua, B. Burak Özhan and Mehmet Pakdemirli
  Volume 2013 (2013), Article ID 169598, 7 pages
• Analysis and Design Optimization of a Compact and Lightweight Joint Torque Sensor for Space Manipulators, Nanzhe Wei, Hanxu Sun, Qingxuan Jia, Xue Ji, and Hanlin Shi
  Volume 2013 (2013), Article ID 241384, 12 pages
• Evaluation of Artificial Caudal Fin for Fish Robot with Two Joints by Using Three-Dimensional Fluid-Structure Simulation, Yogo Takada, Noboru Fukuzaki, Toshinori Ochiai, Tomoki Tajiri, and Tomoyuki Wakisaka
  Volume 2013 (2013), Article ID 310432, 9 pages
• Conceptual Design of Deployment Structure of Morphing Nose Cone, Junlan Li, Jianing Wu, and Shaoze Yan
  Volume 2013 (2013), Article ID 590957, 7 pages
• Study on Calculation Methods for Sampling Frequency of Acceleration Signals in Gear System, Feibin Zhang, Ligang Cai, Feng Wang, Lixin Gao, Lingli Cui, and Zhifeng Liu
  Volume 2013 (2013), Article ID 462401, 13 pages
• Performance Analysis and Application of Three Different Computational Methods for Solar Heating System with Seasonal Water Tank Heat Storage, Dongliang Sun, Jinliang Xu, and Peng Ding
  Volume 2013 (2013), Article ID 857941, 13 pages
• Knowledge Flow Rules of Modern Design under Distributed Resource Environment, Junning Li, Wei Chen, and Youbai Xie
  Volume 2013 (2013), Article ID 560856, 6 pages
• Vortex-Induced Vibrations of a Square Cylinder with Damped Free-End Conditions, S. Manzoor, J. Khawar, and N. A. Sheikh
  Volume 2013 (2013), Article ID 204974, 12 pages
• Study on the Fluidic Component of the Complete Fluidic Sprinkler, Hong Li, Chao Wang, Chao Chen, and Zhenhua Shen
  Volume 2013 (2013), Article ID 658591, 8 pages
• Optimal Model of Operation Parameters of Gathering Pipeline Network with Triple-Line Process, Yongtu Liang, Cen Lu, Kuijie Ren, Qiao Xiao, and Guoxi He
  Volume 2013 (2013), Article ID 573542, 7 pages
• Numerical Study on the Mixed Convection Heat Transfer between a Sphere Particle and High Pressure Water in Pseudocritical Zone, Liping Wei, Youjun Lu, and Jinjia Wei
  Volume 2013 (2013), Article ID 527182, 10 pages
• Online Monitoring and Analysis of Hydroabrasive Cutting by Vibration, Sergej Hloch and Alessandro Ruggiero
  Volume 2013 (2013), Article ID 894561, 10 pages
• Continuous Natural Fiber Reinforced Thermoplastic Composites by Fiber Surface Modification, Patcharat Wongsriraksa, Kohsuke Togashi, Asami Nakai, and Hiroyuki Hamada
  Volume 2013 (2013), Article ID 685104, 6 pages
• Effect of Step-Change Radiation Flux on Dynamic Characteristics in Tower Solar Cavity Receiver, Zhengwei Chen, Yueshe Wang, Yun Hao, and Qizhi Wang
  Volume 2013 (2013), Article ID 402094, 10 pages
• Nomographs and Feasibility Graphs for Enumeration of Ravigneaux-Type Automatic Transmissions, Essam L. Esmail
  Volume 2013 (2013), Article ID 120324, 15 pages
• Comparison Study on Linear Interpolation and Cubic B-Spline Interpolation Proper Orthogonal Decomposition Methods, Xiaolong Wang, Yi Wang, Zhizhu Cao, Weizhong Zou, Liping Wang, Guojun Yu, Bo Yu, and Jinjun Zhang
  Volume 2013 (2013), Article ID 561875, 10 pages
• Wavelet Analysis on Turbulent Structure in Drag-Reducing Channel Flow Based on Direct Numerical Simulation, Xuan Wu, Bo Yu, and Yi Wang
  Volume 2013 (2013), Article ID 514325, 10 pages
• Analyses on Heating Energy Saving of Two Hot Waxy-Crude Oil Pipelines Laid Parallel in One Ditch, Changzheng Sun and Bo Yu
  Volume 2013 (2013), Article ID 948980, 10 pages
• Variable Structure Control of a Catastrophic Course in a High-Speed Underwater Vehicle Launched out of the Water, Min Xiao
  Volume 2013 (2013), Article ID 398707, 8 pages
• Effective Resistance of Gas Flow in Microchannels, Xiao-Dong Shan and Moran Wang
  Volume 2013 (2013), Article ID 950681, 7 pages
• The Processing Design of Jute Spun Yarn/PLA Braided Composite by Pultrusion Molding, Anin Memon and Asami Nakai
  Volume 2013 (2013), Article ID 816513, 8 pages
• Stiffness Identification of Spindle-Toolholder Joint Based on Finite Difference Technique and Residual Compensation Theory, Zhifeng Liu, Xiaolei Song, Yongsheng Zhao, Ligang Cai, Hongsheng Guo, and Jianchuan Ma
  Volume 2013 (2013), Article ID 753631, 9 pages
• Developing Simple Production of Continuous Ramie Single Yarn Reinforced Composite Strands, Hyun-Bum Kim, Koichi Goda, Junji Noda, and Kenji Aoki
  Volume 2013 (2013), Article ID 496274, 7 pages
• Cooling Performance Characteristics on Mobile Air-Conditioning System for Hybrid Electric Vehicles, Ho-Seong Lee and Moo-Yeon Lee
  Volume 2013 (2013), Article ID 282313, 9 pages
• Research on the Controlling Parameters of Creep-Thermal Fatigue Crack, Ming Yan, Xiang-jun Zhu, and Shi-jie Wang
  Volume 2013 (2013), Article ID 406129, 8 pages
• Synthetic Amplitude Spectrum and Its Extensions for Analyzing the Two Perpendicular Directional Vibration Displacement Signals of a Rotating Rotor, Liang Yonggang, Liu Tiebing, Liu Hongxing, Si Junfeng, Huang Xiaolin, and Wang Rui
  Volume 2013 (2013), Article ID 218576, 7 pages
• Turbulence Modulation by Small Bubbles in the Vertical Upward Channel Flow, Mingjun Pang, Jinjia Wei, and Bo Yu
  Volume 2013 (2013), Article ID 379839, 7 pages
• Optimum Path Synthesis of a Geared Five-Bar Mechanism, Wen-Yi Lin
  Volume 2013 (2013), Article ID 757935, 13 pages
• Study of Dynamic Flow and Mixing Performances of Tri-Screw Extruders with Finite Element Method, X. Z. Zhu, G. Wang, Y. D. He, and Z. F. Cheng
  Volume 2013 (2013), Article ID 236389, 12 pages
• The Polymer Effect on Nonlinear Processes in Decaying Homogeneous Isotropic Turbulence, Wei-Hua Cai, Feng-Chen Li, Hong-Na Zhang, Yue Wang, and Lu Wang
  Volume 2013 (2013), Article ID 921524, 8 pages
• Research on Dynamic Models and Performances of Shield Tunnel Boring Machine Cutterhead Driving System, Xianhong Li, Haibin Yu, Mingzhe Yuan, and Yu Zhao
  Volume 2013 (2013), Article ID 359757, 29 pages
• Experimental Study of Ignition over Impact-Driven Supersonic Liquid Fuel Jet, Anirut Matthujak, Kulachate Pianthong, Kazuyoshi Takayama, and B. E. Milton
  Volume 2013 (2013), Article ID 928970, 8 pages
• Magnetic Field Effect on Natural Convection in a Porous Cavity Heating from below and Salting from Side, A. A. Altawallbeh, N. H. Saeid, and I. Hashim
  Volume 2013 (2013), Article ID 183079, 13 pages
• Rossby Solitary Waves Generated by Wavy Bottom in Stratified Fluids, Hongwei Yang, Baoshu Yin, Bo Zhong, and Huanhe Dong
  Volume 2013 (2013), Article ID 289269, 10 pages
• Teaching Planetary Gear Trains with the Aid of Nomographs, Essam Lauibi Esmail
  Volume 2013 (2013), Article ID 978418, 9 pages
• Understanding of Thermal Conductance of Thin Gas Layers, Xiaodong Shan and Moran Wang
  Volume 2013 (2013), Article ID 692842, 7 pages
• A Modified Model for Computation of Flows with Large Streamline Curvature, Jun-Lian Yin, De-Zhong Wang, Yu-Lin Wu, and D. Keith Walters
  Volume 2013 (2013), Article ID 592420, 10 pages
• An Approach for the Evaluation of Sphericity Error and Its Uncertainty, Jian Mao and Man Zhao
  Volume 2013 (2013), Article ID 208594, 5 pages